Industrial Control System Dealers in Saidapet, Chennai

• Brand Name: mootek
• Warranty: 3 YEARS
• Model Number: 485P
• Color: black
• Weight (Kg): 200G
• Mounting Type: DIN RAIL
• Material: iron
• Connector Type: Wired
• Approval: Fcc, CE, Rohs
• Number Of Ports: 2
• Power Supply (V): 9VDC power input
• Storage Temperature (deg. Celsius): -40C TO 85C
• Dimension (mm): 93.0mm,62.4mm,22.0mm
• Shell: IRON
• Humidity (%): 5% TO 95%
• Flow Control: Data direction auto-turnaround, no flow control is required
• Standard: EIA RS-232C, RS-422 standard
• Model Name: serial converter
• Baud Rate: 300
• Isolated Converter: Yes

Our Solar Panels are quite sturdy in their construction and have hassle free operational provision. Available in diverse technical specifications, our Solar Panels deliver great performance & efficiency. Our valuable customers acknowledge our product for its good operational life and excellent guard against voltage fluctuation and short circuit. As a noted exporter and supplier from Chennai, Tamil Nadu, we are highly acclaimed for our product and its properties.

• Brand Name: GEESYS

We are offering power distribution panel, power distribution equipments or power distribution board is used for electrical power distribution. In this acb, mccb, sdf, mcb etc are the main equipments. This receives supply from pcc. Power distribution board offers isolation and short circuit as basic protections. Other protections like over current, earth fault, earth leakage etc.

• Working space :: 355 * 355* x 460mm
• Capacity (approx) :: 19 Kg
• No. of tray :: 3 Nos
• Temperature: 350oC
• Input power :: 6 kW

  To meet the needs of industrial oven control, we, at Bali instruments provide both types of oven control panels, the standard oven control panels and customized oven control panels. These SCR based control panels are prewired and the unit is self-contained. This makes it super easy to install where you simply need to connect the power lines, heater wires and thermocouples. TECHNICAL SPECIFICATIONS Model – BIEO-1 Working space : 355 * 355* x 460mmCapacity (approx) : 19 KgNo. of tray : 3 NosTemperature range : ambient – 350oCInput power : 6 kWInput current : 9AmpAccuracy : ± 3 oCInput supply : 220/230VAC, Single phase AC, 50 HzType of control : Digital Temperature Controller with Air Circulation Fan

we offer Plc Control System. Analog & Digital IO's AC or DC power source SS2 Series ES2 Series EX2 Series EH2 Series SV2 Series SA2 Series SX2 Series RTD, Thermocouple, Load cell module

• Application: Commercial,Residential
• Warranty: 0-5 Yrs,5-10 Yrs,10-15 Yrs,15-20 Yrs
• Material: Aluminium,Stainless Steel
• Power: Solar
• Output Voltage: 220 V,240 V
• Frequency: 50 Hz,60 Hz,70 Hz

PLC, VFD Panels, IP20IP65IP67 Panels Contactor Panel,Isolator Panels Relay Metering Panels, Relay Panels, Changeover panel,Lightning Distribution Board

we offer Programmable Temperature Control Panel. Program 9 profile with 163264 steps program Manual , OnOff, PID with Fuzzy Logic Control Controller Accept input RTDs Thermocouples Three Phase Mains Operated Three phase Heater Control Output Control Device Contactor or Solid state Relay or Tyristor Capacity available 254070100120 A Fabricated wit Stainless Steel or MS with Powder Coated Temperature Range 50 to 1200 º C ( customized)

• Type: Lever Limit Switch
• Material: Metal
• Certification: ISI Certified
• Color: Orange
• Condition: New
• Max. Voltage: 500 V.A.C. Max
• Switch Type: Lever Limit Switch
• Current Rating: 10 Amps
• Application: Eot Crane use

• Power: 1-5 KW
• Voltage: 415V
• Ambient Temperature: 42 Degree C
• Material: Mild
• Frequency: 50Hz
• Current: 40 A
• Relative Humidity: 98%
• Surface Treatment: Paint Coated
• Ip Rating: IP65

  Control Panels for controlling heater output are offered with digital/analog temperature controller, thermocouples, and necessary indicating devices. They can be made strictly as per customer specifications

• Automatic Grade: Automatic
• Power Source: Solar

With our years of experience, our company name figures amidst the most responsive and responsible Suppliers of electrical panel board accessories. Interested buyers can contact us anytime for placing orders; we ensure timely delivery of the same.

• Application: Office
• Brand Name: MIRCOM
• Model Number: Fx2000
• Voltage: 24 Volt
• Frequency: 50 Hz
• Material: MS Powder Coated Body
• Color: RED
• Zones: 2 Loop
• IP Rating: IP50

• Type: Solar Panel
• Application: Industrial, Toproof
• Power Source: Solar
• Efficiency: 90%
• Warranty: 1Year

Relays and other accessories compatible with any Secutron fire alarm control panel.    

We are pleased to introduce ourselves as the leading supplier of the above product, which is used to maintain the Power Factor (PF) above a specified limit. ELITE APFC Panel has a Micro-controller based Programmable Controller, which switches the Capacitor banks of suitable capacity Automatically, in multiple stages by directly reading the reactive load (RKVA) which works in the Principle of VAR Sensing, tends to maintain the PF to 0.99 Lag. The capacitor banks may be selected in number of stages as 4/6/8 according to the load pattern. The TNEB is installing the Digital Electronic Energy Meters for Power and Welding Service consumers having 25HP and above, which has the provision of showing the PF and insisting to maintain the average Power Factor above 0.85 Lag.   Install ELITE APFC Panel to avoid penalties and enjoy the benefits automatically.   WHAT IS POWER FACTOR (PF)? Power Factor is the ratio between the energy drawings (KVA) and the effective energy utilized (KW) i.e., PF=KW/KVA   WHY POWER FACTOR MUST BE MAINTAINED? By maintaining a better PF we can reduce the energy drawn (KVA), thus reducing the current passing through the electrical circuits to the maximum extent possible (even up to 50%) thereby reducing the down time, reduction in heat losses in turn increases the life of the equipment. Otherwise, for every reduction of 0.01 from 0.85 up to 0.75 PENALTY is 1% and below 0.75 it is 1.5% from 0.85 of the Current Consumption Charges (KWh) on your Electric Bill. INCENTIVE is also given by the Electricity Board when the PF is maintained above 0.90 @ 0.5 % for every increment of 0.01 on your Electric Bill.   HOW TO MAINTAIN THE POWER FACTOR? According to the load pattern, proper Capacity of Capacitors to be connected. The value of the capacitors to be connected will vary with respect to the load and its existing PF. There are two ways to maintain PF 1. Fixing the capacitors permanently at the load end or at the mains, generally which is recommended for the fixed loads like Pumps, fans etc., and it is not possible for the loads which have variations in the load and PF. 2. The Power Factor can be maintained by installing ELITE AUTOMATIC POWER FACTOR CONTROL PANEL.   ELITE Controller displays the following parameters. Voltage: R, Y & B Phases, Amps: R, Y & B Phases Present KILOWATT (utilizing current) Present RKVA demand (Required capacitors to attain UNITY power factor) Present KVA (drawing current),Present Power Factor (PF normally 0.99lag) No. of capacitor Banks ON or OFF,Provision to indicate Imbalance load Provision to indicate the change in phase sequence AEE’s PF Controller has built-in protections for High voltage cut-off AEE’s PF Controller has built-in protections for Low voltage cut-off The values and stages can be made as per customer’s request Higher Capacity Panels up to 450 KVAR can be supplied against Order IMPORTANT BENEFITS FOR INSTALLING FOR ELITE AUTOMATIC POWER FACTOR CONTROL PANEL Fully Automatic, no Manual Interventions is required. HEAVY Power Factor PENALTIES on the consumptions are ELIMINATED. INCENTIVES are received on every payment made. Optimize the capacity by reducing the maximum demand KVA. Avoids excess demand charges. Considerable REDUCTION in consumptions (KWH) charges. Improvement in line voltages. Excess Drawing of power is absolutely ELIMINATED. Reduced line current losses and cable overheat. Enhanced life of electrical circuits. Avoids overloading of Distribution Transformers. Additional service connections in existing generation of power by reducing energy losses. Reduced line losses benefits SEB’s and Nation. Avail DEPRECIATION as per Income Tax Depreciation Schedule. OUR PANEL COMPRISES OF VAR SENSING CONTROLLER with LCD display to show all the line parameters. 3 Nos of C.V.T’s (Current Voltage Transducers) of ratio 1:400 CAPACITORS of SIEMENS – EPCOS make – MPP type – 440 V / 50 HZ – Delta connected CONTACTORS to switch in & switch out the capacitors of ABB / SCHNEIDER/BCH make fixed individually to all the stage capacitors at 440 V / 230 V AC coil. MCB/ 3 Pole as Incomer of ABB / SCHNEIDER make. Provision of INDUCTOR COIL individually to all the capacitors to cater the in- rush currents. To Maintain the OPTIMUM POWER FACTOR load balancing to be Carried out in your Premises compulsorily. After providing our APFC panel the readings of KWH, KVAH, Pr.PF, Avg.PF from the EB meter has to be given to our office once in a week to monitor the improvement of PF.  

Shri Vaari Electricals Pvt. Ltd., is one of leading power control panel manufacturers and electrical control center suppliers, based in Chennai, India. The manufacturing of our power control center is based upon several technical specifications. Its performance and longevity is simply unmatched. Lastly, we offer our power control center at most competitive prices. We are engaged in manufacturing of power control centers from the best raw materials. These can be availed by our customers having the following general features: Panels will be suitable for 415 AC supply They will be installed indoors an outdoors and will work efficiently up to an ambient temperature of 45°C  All doors will be suitably labeled and marked for convenience of operation & maintenance.   Construction   Free standing Floor mounting type using 2.0/1.6 mm CRCA sheet. The complete structure shall be rigid, self supporting & free from twists and bends. The panels will be totally dust and vermin proof. They will have fixed or draw out type executions as many be desired.   Finish The entire panel will undergo pretreatment covering decreasing, water rinsing & de-rusting/ phosphating. It will be synthetic enamel painted or powder coated as per requirements.     Bus Bars & Internal Wiring Uniform cross section Aluminum / Copper Bus supported by SMC /DMC bases will be employed through out the length of the panel. Internal wiring be carried out with 1100/650 volt grade PVC insulated stranded conductor wire. All joints will be solidly crimped using copper thimbles Earthing Bus Bars will be running all along the board.     Switch gears/ Components Along with the formal offer, the GA drawing and the bill of material will be submitted specifying the makes & capacities of all the material to be used in the panel.     Standards Ours Panels conform to the standards such as, IS 4237; IS 8623; IS 375     Switch gears/ Components Along with the formal offer, the GA drawing and the bill of material will be submitted specifying the makes & capacities of all the material to be used in the panel.

• Application: Industrial/Commercial
• Color: Grey
• Power Source: Electrical
• Material: Metal

Features Designed and Verified according to IEC 61869-2 Various standard product line Suitable for tariff metering Specialised in customised products Compact and light weight Convenient installation and replacement High electrical and mechanical performance No partial discharge at operating voltage Reliable quality and long lasting durability Casting epoxy resin body ensures high mechanical strength and insulation performance Transparent and sealable secondary terminal cover as an option Specification Highest system voltage: 660V to 36kV Rated primary current: 5A to 5000A Rated secondary current: 1A / 5A Rated accuracy class - Metering: 0.2s, 0.2, 0.5, 1.0 - Protection: 5P, 10P Rated short time thermal current: 75In to 50kA/ 1s to 3s Rated frequency: 50Hz Rated continuous thermal current: 120%, 150%, 200%