Industrial Drilling Machine Dealers in Broadway, Chennai

It is a drill machine which is used for household drilling purposes. Feature High performance level Modern technology Easy to use

• Material: as per need
• Size: 0-1 inch
• Bit Diameter: as per need
• Tensile Strength: as per need
• Specialities: Corrosion Resistant, Sturdy construction, Efficient working, Longer service life.
• Usage/Application: Concrete Drilling

• Country of Origin: India
• Type: Vacuum Degasser
• Material: Stainless Steel
• Application: Industrial
• Voltage: 110 V, 220 V
• Condition: New, Used
• Frequency: 50-60 Hz
• Warranty: 1 Yr, 2 Yrs
• Automation Grade: Automatic, Semi-Automatic

Heated Vacuum Degassing Chamber Heated Vacuum degassing is the process of using vacuum to remove gases from compounds which become entrapped in the mixture when mixing the components. To assure a bubble-free mold when mixing resin and silicone rubbers and slower-setting harder resins, a vacuum chamber is required. A small vacuum chamber is needed to eliminate air bubbles for materials prior to their setting. The process is fairly straightforward. The casting or moulding material is mixed according to the manufacturers directions. Product Features of the Heated Vacuum Degassing Chamber Stainless steel chamber for long-term air-tightness performance. Heavy Duty Industrial Heating System. Adjustable Digital Temperature display and Controller. Various Temperature Ranges available on request. Burhani Vacuum chamber has a rounded edge at the top, for the protection of silicone gasket. Vacuum gauge is assembled on a separate port, so that the reading remains accurate even while pumping/venting the chamber. Gauge reading in both in Hg and Mpa. All kits are vacuum tested for 24 hours before packaging. (leakage less than 2.0 inHg at 24 hours). Two-sided flippable vacuum gasket for better durability and reliability. The gasket is chemically resistant to butane and other solvents. Stainless Steel lid for long life . Strong elastic food grade silicone vacuum hose can connect/disconnect easily with the pump/chamber. 50um air filter on the vent valve to reduce air flow and prevent any dust/powder flowing into the chamber. Easy to install and low-cost to maintain: the chamber can be assembled in 5 minutes. 45 day complimentary warranty and life-long parts support. Product Specs & Part List of the Chamber. Vacuum Chamber: stainless steel. Lid: Stainless Steel. Controller : Microprocessor based Digital Temperature controller. Vacuum Gasket: silicone, resistant to Butane and other solvents. Vacuum Gauge Assembly: 0.5 inHg accuracy. Valve Assembly: very high quality air-tight brass valves, with 50um filter on vent port. Vacuum Hose: 3.3' / 1 meter food grade collapse-proof silicone hose, 3mm wall thickness (8mm I.D, 14mm O.D) Vacuum Pump Adapter: 3/8" hose barb to 1/4 SAE flare port. .  .    

• Type: Drill Jig Bush
• Material: Ball Bearing Steel
• Shape: Round
• Application: Fitting
• Condition: New

get a discount once you order above 2000 pcs of bush..

• Material: High Speed Steel
• Length: 360/400/450/500/700 mm
• Surface Treatment: TIN coating
• Cutting Depth: 35mm, 50mm, 100 mm

The company has cemented its presence among the reliable Manufacturers and Suppliers of PTA Self-Drilling Screws (Hex Head) from Tamil Nadu. Our PTA Self-Drilling Screws ( Hex Head) have built in drill point and does the drilling and tapping on its own in a single operation. It saves time and money by replacing costly drill bits to drill in steel. PTA Self-Drilling Screws (Hex Head) we make available aids in faster completion of drilling jobs as compared to conventional Screws.

• Power: 1-3kw , 3-6kw , 6-9kw, 9-12kw
• Color: Black, Blue , Brown
• Driven Type: Electric ,Hydraulic, Pneumatic
• Weight: 100-200kg, 200-300kg , 300-400kg , 400-500kg
• Voltage: 110V, 220V , 380V
• Warranty: 1year , 2years
• Automatic Grade: Fully Automatic, Manual , Semi Automatic ,Other

Ralliwolf Commando 30 Magnetic Core Drilling Machine

Drill Sleeves, Adjustable Angle Block, Concave Cutters, Drill Stand

• Surface Finish: Powder Coated
• Surface Treatment: Galvanized
• Warranty: 2 years
• Drilling Diameter (in mm): 10 mm

• Automatic Grade: Semi-Automatic
• Max Speed (rpm): 2500 Rpm
• Hole Diameter: 50-100 mm

• Voltage: 230 V
• Material: Stainless Steel
• Frequency: 50 Hz
• Weight: 10 kg
• Power: 0.1 W
• Brand Name: Burhani
• Temperature: 30 Degree C
• Power Source: Electric
• Pump Type: Rotary Pump
• Shape: Cylindrical
• Size: 20 cm X 10 cm
• Model Number: BHF2010
• Capacity: 3.2 Litres

We are Offering Self-drilling or Self-tapping Metal Screws Increase Productivity By Reducing the Number of Steps Required to Screw Together Pieces of Metal. a Self-drilling Screw Has a Chisel Tip Similar to a Drill Bit. this Allows You to Skip Pre-drilling a Hole Into Thinner Gauges of Sheet Metal. the Metal Thickness that You are Drilling Into Needs to Be Thinner Than the Length of the Drilling Point of the Screw. if the Screw Threads Contact the Surface of the Metal Before the Hole is Bored, the Screw Will Snap, Leaving a Portion of the Screw Embedded in the Metal.

We are known as the prominent trader and supplier of Drilling Tools. The drills offered by are used for boring holes in various materials or fastening. These drills are manufactured at vendor’s end using the optimum grade material and advance technology in adherence with quality standards.

Drill Sleeves, Machine Tools, Revolving Centre

• Type: Auto Feed Drilling Machine

Drill Machine, Bore Gauges, Coating Thickness Gauges, Deburring Tools

• Brand Name: STANLEY
• Voltage: 230V
• Warranty: 1 year
• No Load Speed: 0-1150RPM
• Power Consumption: 800WATTS
• Model: SHR263K
• Impact Energy: 3.4J
• Drilling Diameter In Mm: 26MM
• Delivery Time: READY STOCK
• Minimum Order Quantity: 1 Piece

DIN Type Sumi-Power Drills for Long Tool Life and Excellent Chip Evacuation m7 DIN type Sumi-Power Drills are solid carbide drills that employ a new flute design and wide chip pocket to achieve excellent chip management and evacuation. DEX coating enables stable and long tool life over a wide range of work materials and applications.

◆ Automatically find pot to drill hole at X.Y axis ◆ Four processing position, 12 hydraulic clamps, can clamp four sets of work pieces, and also can unload work pieces when drilling ◆ Self-controlled stroke drilling head, no need to set the thickness of work pieces and the length of drilling head, automatically finish the transfer of rapid feeding and work feeding. ◆ CNC、PLC system, CRT display, programming based on WINDOWS platform with CAD connection, fast and convenient programming, and visual previewing ◆ Automatic chip removal, coolant circulation cooling. ◆ Equipped with professional main shaft speed-reducing-motor from SEW, Germany. ◆ Key machine, hydraulic pressure, electric components are chosen from famous cooperation domestic and abroad. ◆ Optimized integration design for complete machine, no foundation requirements ◆ The first choice equipment for the drilling processing of steel board.

FEATURES:- DRILL- MILL

• Brand Name: Micro , Rushi
• Usage/Application: micro drilling , PCB Circuits
• Machine Capacity: 3Mm
• Power Rating: High Speed Motor
• Design: Standard
• Drilling With small holes: 32000
• Minimum Order Quantity: 1 Piece

• Model Number: R3032
• Spindle Taper: mt3
• Max. Drilling capacity: 32 mm
• Dist. Spindle axis to column generating line: 300-700 mm
• Max. Dist. Spindle nose to working surface of base: 275-680 mm
• Dimension of worktable: 250 x 250 x 250 mm
• Spindle Travel: 150 mm
• Diameter of Column: 150 mm
• Overall size: 1235 x 550 x 1195 mm
• Dimension of base: 1050 x 550 x 120 mm
• Spindle Speed: 100-1600 r/min
• Spindle feeds: 0. 08/0. 14/0. 23 mm/r
• Spindle speed steps: 8

Addison is one of India’s leading manufacturers for Cutting Tools. Addison Make Taper Shank Drills available in all sizes.Gold tempered straight Shank Drills also available. Also available in carbide tip.We provide the best HSS Drills and Reamers in the entire industry. We have the skilled manpower and the latest machineries owing to which even the minutest detail is taken care of. We manufacture these drills and have won accolades for its durability, simple configuration and easy installation features. These are also made by using premium quality raw material that ensures durability and sturdy construction.

Drilling, Cutting Wheel, Yuri 1mm green cutting wheel, Abrasive Flap Discs

We are offering gemstones drilling machinery at very affordable prices.

Drilling Machine, needle files, Ball Bearings, Coated Blades

Bosch Hammer Drill Machine, Core Cutting Bit, Makita Power Tools

Drilling Machine, Cutting Tools, hand tools, Pneumatic Tools