Industrial Heaters Dealers in Guindy, Chennai

A Solar Water Heater comprises of a or an array of solar collectors to collect solar energy and an insulated tank to store hot water. Two types of Solar Water Heaters are available; one based on flat plate collectors and the other based on evacuated tube collectors. Solar Flat plate collectors: Solar Flat plate collectors used for solar heating is with special german coating absorber and provide more area to absorb sunlight and almost emit no radiation.Solar Water heating can be used in Industries for preheating of hot water, Industries kitchen for dish wash and others, hotels and Hostels etc.. Advanced heat exchanger system transfers heat from the collector to the tank through specially formulated fluid, meaning the copper tubes remain free from the sediments that cause blockages. High resistance glass-enamelled tank prevents corrosion from hard water ensuring the system stays leak free. Glass enamelled tank prevents the build-up of rust and bacteria, keeping your hot water clean and hygienic. New full-plate absorber with highly selective German coating through sputtering technology provides more area to absorb sunlight and emits almost no radiation, meaning faster water heating. Most advanced solar glass, the collector gives better performance even in cloudy weather. The latest laser welding technique gives superior durability and heat transfer. Solar Evacuated tubes collector: Solar Evacuated tubes collector are made up of strong borosilicate glass which allows absorption of even ultraviolet rays from sun and hence it is very useful in even cold regions.

• Max temp: Aluminum alloy - 375 °C, Brass alloy - 650 °C.

Elmec cast-in heaters are available in a variety of designs and styles suitable for different applications. Elmec cast-in band heaters are available with cooling tubes for heating and cooling barrels of plastic processing extruders. They are very efficient and provides long lasting trouble free service.Elmec cast-in heaters are made in aluminum,brass and bronze.The type of alloy to be casted depends upon the application,max operating temperature & watt density. We built every technically possible heaters as per your requirement.   Elmec cast-in heaters are available in a variety of designs and styles suitable for different applications. Elmec cast-in band heaters are available with cooling tubes for heating and cooling barrels of plastic processing extruders. They are very efficient and provides long lasting trouble free service.Elmec cast-in heaters are made in aluminum,brass and bronze.The type of alloy to be casted depends upon the application,max operating temperature & watt density. We built every technically possible heaters as per your requirement.   Features Efficient Heat Transfer. Cast-in heaters can be supplied with cooling tubes & end fitting. Various Heater terminations. Uniform surface temperatures. Also as per your requirements. Max watt density: Aluminum alloy - 35 w/sq in on heater elements. Brass alloy - 45 w/sq in on heater elements. Max temp: Aluminum alloy - 375 °C, Brass alloy - 650 °C   Applications Injection and Blow Moulding Extruders Moulds & Dies Packaging machinery Medical equipments Thermoforming equipment

We have carved a niche as one of the outstanding laboratory Heating Mantle suppliers from India. The heating mantle is widely demanded by many of the laboratories as these are very effective in the heating of chemical at the desired rate without any hassle. The electric heating mantle has an indicator and a regulator that helps us to keep a check on the temperature needed. Specification Voltage : 230 Volts AC Supply Outer : Made of Aluminium Inner : Fiber Glass Yarn Thread Insulation : Glass Wool Power Control : Sun Bin energy Regulator Thermometer Warning : Chemical Spillage Over and load minuses will greatily reduce the service life. Optional Availabe in different sizes and shapes as mentioned belowAlso glass wares in needed can be supplied

• Features: Zero blockage,Corrosion free system,Hygiene and safe
• tank material: Stainless Steel
• Type Of Collector: Flat Plate Collector (FPC), Integral Collector (Batch System), Evacuated Tube Collector (ETC)
• Warranty: 1 year
• Brand Name: adhiam
• Tank Volume: 200 lpd, 200 - 300 lpd, 300 - 400 lpd, 500 lpd, more than 500 lpd
• Installation provided: Paid

Induction hardening is a form of heat treatment in which a metal part is heated by induction heating and then quenched. The quenched metal undergoes a martensitic transformation, increasing the hardness and brittleness of the part. Induction hardening is used to selectively harden areas of a part or assembly without affecting the properties of the part as a whole.  

“MIGHTY INSTRUMENTS”Heating Mantle Aluminium Housing with powder Coat finish.The heating elements are made out of Kanthal wire on helically wound coil form safety insulated by fibre glass sleevings which in turn is attached to kintted glass fabric, to give flexible support to the flask and controlled by a simmer stat.  

• Voltage: 230 Volts AC Supply
• Outer: Made of Aluminium
• Inner: Fiber Glass Yarn Thread
• Insulation: Glass Wool
• Power Control: Sun Bin energy Regulator
• Thermometer Warning: Chemical Spillage Over and load minuses

Capacity In Ml and Watts: In ML In Watts 50 ML 60 W 100 ML 60 W 250 ML 150 W 500 ML 200 W 1000 ML 300 W 2000 ML 500 W 3000 ML 500 W 5000 ML 1000 W 10000 ML 1000 W 20000 ML 1000X2 = 2000 Watts 50000 ML 1000X3 = 3000 Watts (3 Phase Supply)

Elmec High Watt Density Cartridge Heaters are most advanced technology and quality raw materials, enables usage with high density in small spaces and advanced manufacturing process ensures our heaters are vibration proof and thus ensures excellent reliability in heavy duty working conditions (Like Plastic Processing, Printing, Packaging and automobile industries where the heaters are subjected to heavy vibrations).

• Specialities: Consistent heating capacity, Rugged construction with accurate measurement ability, Enhanced functional life.

• Material: Aluminium, Stainless Steel
• Color: Brown, Grey, Light White, White
• Voltage: 110V, 220V, 380V
• Power Source: Electric
• Warranty: 1year, 2years
• Use: Heating
• Classification: ISO 9001:2008 Certified

We have carved a niche as one of the outstanding laboratory heating mantle suppliers from india. The heating mantle is widely demanded by many of the laboratories as these are very effective in the heating of chemical at the desired rate without any hassle. The electric heating mantle has an indicator and a regulator that helps us to keep a check on the temperature needed. Specifications: voltage : 230 volts ac supply outer : made of aluminium inner : fiber glass yarn thread insulation : glass wool power control : sun bin energy regulator thermometer warning : chemical spillage over and load minuses will greatily reduce the service life. Optional availabe in different sizes and shapes as mentioned below also glass wares in needed can be supplied

• Type: Immersion Heaters
• Certification: CE Certified, ISO 9001:2008
• Color: Grey, White, Sliver
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Warranty: 1year, 2years
• Application: Boiling Water
• Automatic Grade: Automatic, Manual
• Energy source: Electric, Solar

The Energy Saving Band Heater comprises of two layers of asbestos to reduce the heat loss and save energy up to 25%. Our Energy Saving Band Heater is durable and offers uniform heating without any hassle. The Energy Saving Band Heater is provided with imported nickel chromium resistance wire with Mica, which helps in bearing high temperature. Why Our Energy Saving Band Heater? Sturdy design and high quality Reduces heat loss and save up to 25% energyCan withstand higher temperatureHigh performance

Heating mantles are made of thick gauge of spun aluminium with powder coated finish of attractive color. The heating elements out of Nichrome wire on helically wound coil form safety insulated by fibre glass sleevings which in turn is attached to knitted glass fabric, to give flexible support to the flask. The heating elements so, designed operates at black heat conditions, ensuring uniform heat transfer thus avoiding bumping of contents of flask. Mantles are duly insulated by glass wool. The mantle gives maximum surface temperature of 450 ºC. which is controlled by a energy regulator, suitable for operation on 230240V AC 50HZ.

Solar water heater is creating awareness among the Industries like manufacturing units, hotels, Hospitals, resorts to save energy – mainly by saving the fuel costs of boilers. The usual fuels used in the boilers are – fire wood, coal, furnace oil, electricity or LPG. The industries can save up to the extent of 30-40% on their fuel costs by introducing the Renewable energy concepts like Industrial Solar Thermal System. Elite Power Industrial Solar Thermal System is suitable for plants where boilers are using in the manufacturing process. Usually the feed water to the boilers will be of ambient temperature ( approx 25-30 degree) which can be pre heated by using Solar Thermal System up to 80 degree so that fuel using to heat the boiler can be saved 30 -40%. By using Industrial Solar Thermal systems,   30-40% savings in Fuel costs for boilers when the boiler feed water is pre- heated up to 80oC using the Solar Thermal System. The indirect savings of labour cost, transportation cost and storage cost of fuel – like firewood or coal which is usually used as boiler fuels. There will be savings in Electricity cost as well – of ID and OD fans which are used while the boiler is working. As the boiler working time will be reduced considerably by pre -heating the boiler feed water, automatically the working time of ID fans and OD fans will be reduced.   We had successfully installed Solar Thermal Systems in many industries mainly for pre- heating of their boiler feed water. Other benefits are Return on Investment (ROI) in 6-8 months. Can claim Depreciation 80% in 1st yr. Capital Subsidy of 38,000 for every 1000LPD at the time of invoicing.

Micro Electric Corporations, Mica Band heaters are made of Nickel Chrome resistance ribbon precisely wound on specially selected Mica or  Micanite sheet. It is  then      insulated  and  covered  by metal sheathing and rolled to the required shape. We build every technically possible heaters as per your requirement. Rust resistant Sheath. Top Quality Nickel Chrome ribbon. Max. 3.6 watts/cm2. Max. Operating temperature up to 250 °C. Available with inbuilt insulation pad to reduce power consumption. Applications Plastic Processing Machinery. Injection and Blow Moulding. Extruders. Many other Applications. (Medical,Lab-Equipments....etc).

• Features: High performance, Longer service life, Low maintenance

• Type: Solar Water Heater
• Color: Brown, Grey, Light White, White
• Condition: New, Used
• Warranty: 1year, 2years
• Weight: 10-100kg, 1000-200kg, 200-300kg, 300-400kg, 400-500kg
• Application: Water Heating
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic

Induction Heaters, grinder mixer, Fan Motor

Heating Mantle, Vacuum Furnace, Furnaces, Deep Freezer, Bod Incubator

Stainless Steel Solar Water Heater, tankless water heaters

Infrared Heaters, Titanium Heaters, Thermostats, Strip Heaters

Heating Mantles, Textile Materials, Glassware, Laboratory Equipment

electric radiators, electric stove, Electric Toaster, Electric Water Boiler

One of the best leading supplier of hot water generators

Hot Water Generators, water chemical, welding plates, Plate Heat Exchangers

Infrared Heater

Enclosure Heaters With fan, Power Distribution Rack, CAD data, gland plates

Dg Set, electronic instrument meter repair, electrical installation works