Industrial Pump Dealers in Nungambakkam, Chennai

We are leading improter distributor of Thermal Foggers (commercial & Home series). Our equipment has been widely used in pest control, disinfection, crop protection, and disease prevention application field and known as ZENFOG.ZENFOG always strive to improve the performance and reliability of its machines. Our fog are well supported by after-sales network that provides training, repair, service and support.

Our company is renowned for providing highly efficient Water Pre Filtration System, which is designed as per the international norms & standards. Our Water Pre Filtration System can be easily installed at the site and requires low maintenance cost. The Water Pre Filtration System is widely used in various industries. Application : Industries

Solar water pumps can be used for residences, farms or large agricultural applications. It is a self-suffiecient mechanism that is independent of grid power, batteries etc. It runs on solar power and can be combined with all types of electrical water pumps; household, irrigation, drip-irrigation, submersible, surface or deep-well pumps.   A solar array is configured to suit the demands of the type of pump it is running. It is a trendous cost savings when compared to power usage or running pumps on diesel – besides being a clean, green solution.  

• Brand Name: Transflow Systems
• Max Flow Rate: 120 LPM
• Liquid Temp: 88 Deg C
• Usage/Application: To Take Out Liquid From Barrel.
• Housing: SS 316
• Bearing / Sleeve: PTFE

We are offering oil free vacuum pump. Twin headed rocking piston max. Flow 5.2 cfm (146 lpm) max. Pressure 116 psi (8 bar) max. Vacuum 27”hg (910 mbar) permanently lubricated bearings oil-less, non-lubricated cup and cylinder long-life cup design thin wall cylinder for good heat transfer stainless-steel valves capacitor as standard field service ability thermally protected motor.

• Material: Plastic
• Color: White
• Weight: 200 gm
• Capacity: 450mm Hg +/-10
• Jars: 1 x 200 ml Jar
• Dimension: 17 x 5 x 8 cm
• Adjustable vacuum: 50%&100%

motorpal fuel injection pump & compontents Our Fuel injection pumps is made up of high grade raw materials. It is widely appreciated by our customers because of its highly efficient performance and durability. We are offering this pump in several sizes and capacity. These are widely used in different sectors of industries.

The pneumatic diaphragm metering pump consists of a liquid chamber and an air chamber separated by a diaphragm. In the liquid chamber, the suction (inlet) and discharge (outlet) ports have check valves that control the direction of the fluid flow. A pipe nipple connects the controller to the pump air chamber. In the air chamber, the airgas power supply from the controller enters and exhausts through the pipe nipple connector. When the controller exhausts the airgas supply, the liquid suction pressure and the return spring force the diaphragm backwards. The diaphragm stops when the end of the diaphragm stem, which is attached to the air chamber side of the diaphragm, collides with the end of the stroke adjuster.

• Application: Lube Oil , LDO, HSD, Furnace Oil, Process Oils, Coolant Oils, Grease
• Capacity: 10,000 LPM
• Working Temperature: + 380 Degree

Features Capable of Higher capacity / Bulk Liquid Handling No metal to metal contact between rotors Long life in service Dry running capability Lowest NPSHR Low Noise & Vibration Mounting type- Horizontal Foot, Horizontal Flanges,  Vertical pedestal MOC-Cast Iron, Cast Steel, Fabricated Carbon Steel, Stainless Steel & etc., Sealing – Gland Packing, Grafoil Packing ,  Mechanical seal     Description Application:- Loading / unloading of Lube Oil , Fuel oil and any industrial liquids Railway wagon , Truck tankers,  Ships and Tankers-Bulk cargo handling. Lubrication, circulation and cooling. Process pumping of high viscous products, bitumen, molasses, soap and similar products. Long distance pipeline pumping of viscous products

• Power Range: 0.5HP to 1.0 HP
• Speed: 2800RPM
• Head: Maximum 40M
• Discharge: Maximum 60 LPM
• Voltage Range: 200V- 240V, 50Hz, AC Single phase
• Motor Type: Capacitor start and run motor TEFC type

Features     High grade silicon stamping for better PerfomanceBuilt-in with imported motor protectorDynamically balanced Rotor & ImpllersGunmetal / Cast Iron Impellers for higher effficiency Application     Borewell to overhead Tank FillingDomestic / Commercial Water SupplyIrrigation for Small Farms & Gardens

• Model Name/Number: CR-CM-10-16
• Brand: Grundfos
• Usage/Application: Water Treatment Plant
• Power Source: Electric
• Phase: Single Phase
• Capacity: 8000 LPH
• Frequency: 50 Hz

• Range: -0.9 Bar Vacuum to 2 Bar Pressure
• Medium: Air
• Sensitivity / Resolution: 0.05 mBar / 0.5 mmWC
• Instrument Dimension: 230 x 220 x 70 mm (H x W x D)
• Instrument Weight: 1.1 Kg.

• Compact, Light Weight, Hand Operated • Combined Vacuum & Low Pressure Pump with Pressure / Vacuum Changeover option • Generation (Range) of : Pressure Upto 2 Bar; Vacuum Upto 0.9 Bar • High Sensitivity / ResolutionFine Adjustment Vernier with built-in Volume Chamber to realizeHigh Resolution / Sensitivity of around 0.05 mBar (0.5 mmWC) • Very Low Leakage rate • Flexible Nylon Hose (1 Meter) with Swivel Adaptor to connect devices under test • Test Connection Port : 1/4″ (F) BSPGauge / Indicator Connection Port : 3/8” (F) BSP

• Model Number: TVB1S
• Brand Name: TruVac
• Number Of Stages: Single stage
• Power: 1/4HP
• Application: Industrial
• Phase: Single
• Weight: 6 kgs
• Features: Robust structure ,Easy to install ,Compact design
• Body Material: Cast Iron
• Voltage: 230V , 50 Hz
• Flow Rate: 1.5 to 12 CFM

We are offering cdlkf series immersion multistage centrifugal pump. These pumps are compact, highly reliable, low maintenance and easy to install. This immersion multistage pump has flow range (q) 0.4-55.0 m3hr and liquid temperature -15°c - +120°c.

• Max Flow Ltrs/min: 15
• Max Vacuum (Inches Hg): 22

Brand Sh Vacuum Pumps are the perfect companion in the laboratory for all Vacuum and Pressure requirements. Completely oil-free, they are the only choice when Oil contamination is a problem. All moving parts are designed such that maintenance is minimum. No lubrication required.Manufactured from special grade aluminium.Diaphragms made of 2-ply nylon reinforced neoprene.

• Brand Name: SATA
• Condition: New

• Material: Stainless Steel
• Usage/Application: Hospital,Clinics
• Capacity: 1-5 Ltrs
• Power Source: Electric
• Frequency: 50 Hz

• Brand Name: DUPLOMATIC
• Discharge: 26.1-285 LPM
• Material: Mild Steel
• Motor Horse Power: ALL SIZE
• Pressure: 210 BAR
• Pump Type: Vane Pump
• Model Name/Number: DFP
• Power Source: ELECTRIC MOTOR
• Motor Speed: 1500
• Head: 5-10 m

Vaccum Pump, 3D / 4D Ultrasound Machine, Reusable Bubble Humidifier

Sewage Pump

Power Sprayers, Agro Machinery, combine harvesters, Paddy Transplanter

Hydraulic Pumps, Implements, engines and gensets, Gears

Sewage submersible pump, Air Valves, flanged pipes, Pipes Fittings

Oil Pump Assembly, automobile engine, automobile oil pumps

We can supply the best quality branded vacuum pumps as per the need of our customers . So as to fullfill there requirements

Rotary Barrel Pump V25 / 3R / SPL / F, Roll Out Racks, rigging screws

Hydraulic Gear Pump machine, Paper Plate Die, All cutting dies

Water Pumps

water pressure pumps, water jet cleaning systems, Fogging System

Oil Pump Assembly, Automobile Parts, Engine Components