Industrial Valve Dealers in Broadway, Chennai

• Features: Low maintenance,Quality assured,Robust design

• Media: Gas
• Material: Stainless Steel
• Valve Size: 10mm
• Pressure: Medium Pressure

Located in Tirupati, Andhra Pradesh, we are one of the well-acclaimed suppliers of S.S. Hydrant Valves. Our products are highly recommended due to their sturdiness and durability. The S.S. Hydrant Valve is sourced from a modern facility with upgraded with advanced machinery. Each product is checked on various parameters to rule out issues. You may contact us for bulk orders and tamper-free delivery.

Construction :CI / CS / DI / Al. Br. ➣Max Pressure :12 Bar ➣Size :80 NB to 200 NB ➣Accessories : a) Wet / Dry Pilot Trimb) Water Motor Gong ➣Approval :UL

Motorized Gate valve On Off Three Phase and Modulating 4-20mA Size range starts for 1" to 16" Manual over ride provided available valve MOC WCB,SS304,SS316 & SS316L.

• Construction: Weir type design, soft seated, raising stem
• Design and manufacturing std: As per manufacturer’s standard
• End connections: Flanged as per ANSI B 16.5(150 #) as per BS 10(Table D/E/F) & DIN STD.

FEATURES: Low pressure 1" female NPT connection for high f low . Lockable w eather tight enclosure, for outside mounting. Gauge for display of supply pressure. Box can be mounted horizontally or vertically by changing f ront label. Box available in recessed or surface mounting. 
 SPECIFICATIONS: The “Emergency Gaseous Oxygen Inlet Station” shall be an CMM Alert-1 series. As required by NFPA 99 (National Fire Protection Association) “Health Care Facilities”, oxygen systems having the source of supply outside the building shall have an inlet to connect a temporary, auxiliary source of supply for emergency or maintenance situat ions. This connection shall include necessary valves and to allow for an emergency supply of oxygen and isolation of the normal source of supply. The inlet connection shall be a 1" female npt connection and be provided w ith a plug to prevent entry of foreign matter into the oxygen system w hen not in use. A 1" brass ball valve controls access to the emergency supply, and the gauge indicates the pressure being introduced into the oxygen pipeline. The Emergency Gaseous Oxygen Inlet shall be housed in a w eather tight resessed enclosure. The enclosure door shall be labelled "Emergency Low Pressure Gaseous Oxygen Inlet" and shall be equipped w ith a staple for padlocking to allow entry only by authorized personnel. Amount ing f rame shall extend completely around the enclosure to trim recessed mounting on an exterior w all. The interior of the enclosure shall be clearly labelled w ith instructions for connection and operation of the emergency oxygen inlet. Bronze body check valves with female pipe threads on each end is required for installation in the main and emergency supply pipeline in accordance w ith NFPA-99. A brass body relief valve w ith the relief pressure set @75 psi is required for installat ion in the emergency supply line. The relief valve shall be supplied factory cleaned for oxygen service and shall automatically reseat af ter discharging to provide a positive seal. Non-Locking ValvesSPECIFICATIONS All area and main line isolations valves shall be CMM Alert- 2 Series. Valves shall be non- lockable. The valves shall be oxygen cleaned, full port, three piece ball-type with flanges to allow easy service and installation. The valve shall have a bronze body, and a blow-out proof stem. The valve ball shall be bronze chrome plated, and the seats and packing shall be Teflon (TFE). The valve shall have a pressure rating of 600 psig. and be hydrostatically tested. Type .K. copper pipe extensions that are cleaned for medical gas service shall be fitted into each side of the valve. A gauge port shall be drilled into one of the pipe extensions for the purpose of inserting a gauge if required. The valve assembly shall be plugged or capped and sealed in a plastic bag to prevent contamination. Each valve shall have a bracket used to identify the gas being handled by means of a gas specific label. A lever type handle shall be used to operate the valve(s); the valve shall be changed from fully open to fully closed through a quarter turn of the handle.   

• Application: Measurement and control , Water treatment , Ship building Food and beverage
• Port Size: 1/2"
• Power: Manual

• Brand Name: Parker

We are offering parker miniature solenoid valves. Our parker pressure controllers are available with following features: • integrated closed-loop control of pressure, vacuum and flow • eliminate costly manual drift adjustments • fast response, low cost high performance these controllers are available at most competitive price.

• Brand Name: Festo
• Valve Size: 10mm
• Item Code: 84818090
• Part No: 161414
• Corrosion resistant class KBK: 2 - moderate corrosion stress
• Normal nominal flow: 400l/min
• Operating pressure: -0.9 to 10 Bar
• Nominal width: 4mm
• Bearing temperature: -20 to 40 Degree C

We are main supplier of this product.

We are offering ball valves. part name material body c.i (is 210 fg. 200) c.s (astma-gr.wcb f.c.s (a-105) s.s (astm-a351 gr. Cf8 cf8m) & alloy steel(1 piece/2piece/3piece design) ball s.s 304/316 spindle s.s 304/316 seat 100% ptfe/glass filled teflon carbon filled teflon handle m.s/s.s 304/316. type screwend end class ------------------- size 15mm to 100

We have an extensive supply-chain system that empowers us to ensure a distribution of consignments is done within the postulated time. Making sure to capture all marketplaces of chennai(india), our organization has arisen as an established provider of this range of product.

• Material: Stainless Steel, Brass/Bronze
• Media: Air, Water, Gas
• Temperature Of Media: Normal Temperature
• Valve Size: 1/2 inch
• Brand Name: Flocon
• Pressure: 10 Bar

• Material: Carbon Steeel, Metal, PP, PVC, Stainless Steel, UPVC
• Automatic Grade: Automatic, Manual
• Number Of Way: 2way, 3way, 4way
• Size: 1.1/2inch, 1.1/4inch, 1/2inch, 1inch, 2inch, 3/4inch, 4/5inch, 5/6inch, 6/7inch
• Type: Solenoid Valve
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Pattern: Plain
• Pressure: High, Low, Medium
• Feature: Blow-Out-Proof, Casting Approved, Durable, Investment Casting
• Max Pressure Resistance: 1.2 Mpa

We are offering industrial valves, industrial cocks. A valve is a device that regulates the flow of a fluid (gases, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. Valves are technically pipe fittings, but are usually discussed as a separate category. In an open valve, fluid flows in a direction from higher pressure to lower pressure.] valves are used in a variety of contexts, including industrial, military, commercial, residential, and transport. The industries in which the majority of valves are used are oil and gas, power generation, mining, water reticulation, sewerage and chemical manufacturing.

thermostatic expansion valves, Solenoid Valve, Pressure Switches

• Material: Brass
• Usage: Water
• Packaging Type: Box
• Design: DN15
• Surface Finish: Smooth Finish
• Type: Valve

• Brand Name: Kitz
• Material: Brass/Bronze
• Temperature Of Media: Medium Temperature
• Packaging: Box
• Length: 35-92 mm
• Height: 70-205 mm