Industrial Valve Dealers in Royapettah, Chennai

• Brand Name: Parker

we are offering parker miniature proportional valves. our parker miniature proportional valves are made using high grade components and materials by the best vendors of the market. our parker miniature proportional valves are made and offered under the strict vigilance of our professionals. our professionals ensure that these products are made in compliance with the preset industrial norms & standards. these can be easily availed by the customers at affordable rates. superior life and repeatability thermally and non thermally compensated models

These valves are designed for installation on commercial refrigerating systems and on residential and industrial conditioning systems.

Proportional valves Electronic throttle valve 5/3 dynamic control valve Set point module available as accessory Also for servo pneumatic applications/positioning with SPC200 and SPC11.   Privacy Policy : We do not sell, trade or otherwise transfer to outside parties any of your personally identifiable information. We use the information to send updates about our company and projects and may contact you if requested or required. If you dont want to be on our mailing list, You can opt out any time by contacting us on 044-2848 4874 or by clicking on the 'unsubscribe link' mentioned in our email. If you have any questions or concerns about our privacy policy or data processing. Please contact us. We may update this policy time to time. Readmore...

• Material: Stainless Steel
• Application: Gas Fitting, Water Fitting
• Color: Grey
• End Connection: Butt Weld, Screwed
• Pressure: High, Medium
• Feature: Blow-Out-Proof, Corrosion Proof

Ranges : Ball Valves Butterfly Valves Gate Valves Pressure Relief Valves Non return Valves Check Valves Globe Valves Needle Valves & etc.  

National engineers is one of the prominent organization engaged in manufacturing and supplying a wide range of flow control valves from india.

FEATURES: Low pressure 1" female NPT connection for high f low . Lockable w eather tight enclosure, for outside mounting. Gauge for display of supply pressure. Box can be mounted horizontally or vertically by changing f ront label. Box available in recessed or surface mounting. 
 SPECIFICATIONS: The “Emergency Gaseous Oxygen Inlet Station” shall be an CMM Alert-1 series. As required by NFPA 99 (National Fire Protection Association) “Health Care Facilities”, oxygen systems having the source of supply outside the building shall have an inlet to connect a temporary, auxiliary source of supply for emergency or maintenance situat ions. This connection shall include necessary valves and to allow for an emergency supply of oxygen and isolation of the normal source of supply. The inlet connection shall be a 1" female npt connection and be provided w ith a plug to prevent entry of foreign matter into the oxygen system w hen not in use. A 1" brass ball valve controls access to the emergency supply, and the gauge indicates the pressure being introduced into the oxygen pipeline. The Emergency Gaseous Oxygen Inlet shall be housed in a w eather tight resessed enclosure. The enclosure door shall be labelled "Emergency Low Pressure Gaseous Oxygen Inlet" and shall be equipped w ith a staple for padlocking to allow entry only by authorized personnel. Amount ing f rame shall extend completely around the enclosure to trim recessed mounting on an exterior w all. The interior of the enclosure shall be clearly labelled w ith instructions for connection and operation of the emergency oxygen inlet. Bronze body check valves with female pipe threads on each end is required for installation in the main and emergency supply pipeline in accordance w ith NFPA-99. A brass body relief valve w ith the relief pressure set @75 psi is required for installat ion in the emergency supply line. The relief valve shall be supplied factory cleaned for oxygen service and shall automatically reseat af ter discharging to provide a positive seal. Non-Locking ValvesSPECIFICATIONS All area and main line isolations valves shall be CMM Alert- 2 Series. Valves shall be non- lockable. The valves shall be oxygen cleaned, full port, three piece ball-type with flanges to allow easy service and installation. The valve shall have a bronze body, and a blow-out proof stem. The valve ball shall be bronze chrome plated, and the seats and packing shall be Teflon (TFE). The valve shall have a pressure rating of 600 psig. and be hydrostatically tested. Type .K. copper pipe extensions that are cleaned for medical gas service shall be fitted into each side of the valve. A gauge port shall be drilled into one of the pipe extensions for the purpose of inserting a gauge if required. The valve assembly shall be plugged or capped and sealed in a plastic bag to prevent contamination. Each valve shall have a bracket used to identify the gas being handled by means of a gas specific label. A lever type handle shall be used to operate the valve(s); the valve shall be changed from fully open to fully closed through a quarter turn of the handle.   

• Feature: Compact design with only two devices,Automatic axle lifting/lowering depending on the vehicle load
• Application: Heavy commercial vehicles
• Benefits: Reduced plumbing at the customer’s end, thus reducing fitment time and improving serviceability,Reduced fuel consumption due to less air consumption

SmartLift is used for lifting and lowering the axle depending upon the vehicle�s load condition. It operates through the pneumatic load sensed by the load detection valve. It automatically lowers the axle during ignition �off� condition to prevent theft of the wheels. Driver can also manually override the function to lift the axle

• Valve Size: 300 mm
• Usage: Used in pipelines to shut-off flow
• Color: Silver
• Material: Mild Steel
• Country of Origin: Made in India
• Brand Name: Dignity Hardware Stores
• Specialities: High strength, Smooth Work, Error Free ,Non-corrosive
• Surface Finishing: Polished
• Temperature Of Media: High Temperature
• Media: Air

• Material: PVC
• Pressure: Upto 5 Kgs/Cm2
• Color: Black & Orange
• Valve Size: 65 NB (2.5")
• Usage/Application: Water Treatment
• Brand: Initiative Engineering
• Media: Water
• Finish: Smooth
• Handle Operation: Do Not Operate While The Pump is Running Codition.
• I Deal In: New Only

Single Headed Oblique Type  Gun Metal Fire Hydrant Valve 2.5" (63mm),  75mm  N.B. Flanged inlet,  with  63mm Female inst. Outlet with Blank Cap and Chain as per IS:5290 with ISI mark  (Flange O.D 200mm, PCD 160mm,  4 nos X 19mm dia holes) (Also available in Stainless Steel)   63mm GM Single Headed Hydrant Valve – Commercial (Flange O.D 185mm,  ID 63mm, PCD  145mm) Also available in 38mm, 50mm – Standard Quality (GM)   Double Headed Gun Metal Hydrant  Valve 2.5" (63mm) with two  individually   controlled 63mm Female Inst. outlets, with 100  mm  N.B. Flanged Inlet, complete with male Blank Caps and  Chains  as per IS:5290 (Flange OD 220 mm, PCD 180mm, 8 nos X 19mm dia holes)   Double Headed Hydrant Valve – Commercial (Flange OD  220mm, ID 100mm, PCD 180mm)      

Norgren Proportional Valves, Ball Bearings, bucket elevator belts

egr valves, analog clock, brake light switches, fuel level sensors

• Size: CETOP 03, 05
• Brand Name: Duplomatic
• Model Name/Number: DSH3, DSH3L, DSR3L, DSR3H, DSA3, DSC3, DSH5, DSA5
• I Deal In: New Only
• Directional Control: Yes
• Valve Style: Lever Operated Directional Control Valve
• Maximum Operating Pressure: 320 BAR
• Mounting: Subplate
• Features: Higher efficiency, Compact size, Cost-effective for Automotive applications, High product quality

• Drain: 50 mm ( 2'' ) Hose elbow
• Maximum Fow: 15 m3/hr @0.5kg/cm2 pressure drop(service / rinse / backwash)
• Regenerate Suction Tubing Size: 1/2''
• Injector Ratio: 1 ratio 1
• Maximum Operating Pressure: 5 kg/cm2
• Minimum Pressure for Uniform Suction: 2.0 kg/cm2

Ball Valves, nrv, Taps, connection pipe

Ci Ball Valve, Bolt, GI Pipes, Gun Metal Valves, High Tensile Bolts

safety, Uniforms, Trousers, Jackets, T-Shirts

Industrial Valves, Bolts, Spanners, Screwdrivers, plumbing equipment, Nuts

plastic valve, rubber non return valve

commercial manifold valves, petrochemical manifold valve