INE Test Technologies India Private Limited Royapettah, Chennai, Tamil Nadu

YXLON International a company of COMET Group is worldwide leading manufacturing and supplier of Industrial X-ray Systems and Industrial Computed Tomography ( CT ) systems for non destructive testing of materials ( NDT). YXLON offers Application and Testing services with customer support world wide.Detail detectability

YXLON International a company of COMET Group is worldwide leading manufacturing and supplier of Industrial X-ray Systems and Industrial Computed Tomography ( CT ) systems for non destructive testing of materials ( NDT). YXLON offers Application and Testing services with customer support world wide .

The range of water cooled shakers are used for many different applications, such as testing automotive sub-assemblies, military and defense components, large electronic components, and even fully assembled satellites. By utilizing the dual hydrostatic bearings that are incorporated in the shaker design, payloads with high overturning moments can be tested without the need for external guidance systems. The water cooled shakers may also be supplied with horizontal slip table systems for 3 axis testing . Shakers from 18000 lbf (80kN) to 50000 lbf (222 kN) 7 configurations All Models are water cooled. Large force systems include chillers. Dual Hydrostatic Bearings Good axial and torsional stability Special suspension options Automatic Load Support and armature centering Payload Support up to 3000 lbs (1365 kg) Tunable suspension to produce peak force at low resonant frequencies Options for cooling by airline or by standard blowers Water cooled shakers cover the force range 18000 lbf (80 kN) to 50000 lbf (222 kN). These shakers all produce 2 inches (50mm) displacement all are water-cooled. All models may be supplied on high quality pneumatic mounts, for vertical vibration isolation, in trunnions for horizontal and vertical operation, or in monobases for three axis testing using a slip plate. PDF data sheets may be obtained by clicking on the required model.

Temperature range: -65 ~ +180 °C (Solid construction type) Temperature range: -65 ~ +70 °C (Panelised type) (changeable according to user's demand) Temperature stability: Less than ± 0.5 °C Temperature uniformity: Less than ± 2 °C Heat up rate: More than 5 °C min Cool down rate: 0.5~5 °C min Volume: 8000L, 15000L, 26400L, 36000L (Different sizes of chambers are available on users demand.)

Vitrox advanced 3D X-Ray Inspection System (AXI) is designed to specially cater to different sizes of PCB assembly to be examined at micron level with maximum throughput. This translates to increased production efficiency and cost savings for manufacturers.

Temperature range: Ambient +5 °C ~+250 °C (changeable according to user's demand) Temperature uniformity: Less than ± 2.0 °C at 100 °C Heat up time to 100 ? : Less than 85 minutes Max. final vacuum: 1x10¯²mbar (0.01mbar) Volume: 27L,65L, 130L, 512L and (Different size of chambers are available on users demand.)

Temperature range: Cold zone -60 ~ +60 °C , Hot zone +50 °C +200 °C (changeable according to user's demand) Temperature stability: Less than ± 0.5 °C Temperature uniformity: Less than ± 1.5 °C Temperature recovery within 5 °C min Volume: 27L, 64L, 125L (Different sizes of chambers are available on users demand.)

Teradyne's TestStation Multi-Site systems deliver 2 to 4 times greater test capacity, delivering 200 to 400% greater productivity, and 40 to 50% lower total cost of test compared to a conventional single site system. Supporting a full range of MDAICTFBT production test capability, Teradyne's TestStation Multi-Site systems expand test capacity and productivity while reducing test floor space and energy costs.

Configurable up to 15,360 Test Points TestStation LX2 is Teradyne's largest pin count in-circuit test system. Configurable up to 15,360 pins, TestStation LX2 utilizes the new UltraPin II 128HD pin card for testing large, complex, and heavily-integrated printed circuit board assemblies. Advantages: TestStation LX2 features: » Configurable from 256 to 15,360 pins » Capable of testing large, complex, and heavily integrated PCBs » Safe, accurate, and reliable electrical test » Exceptional diagnostic accuracy » Designed for fast test throughput Features and Options: The TestStation LX2 test system supports all the standard and optional features of the TestStation platform, but is unique in the following ways: » Highest capacity in-circuit test solution in Teradyne's TestStation family » Configurable with up to 15,360 pins » Equipped with built-in features for testing large, complex, and heavily-integrated PCBs » Supports up to 30 pin card slots » Configurable with 128L, 128HD, and 124 hybrid pin cards to optimize tester pin counts and compatibility with previous TestStation LX systems » The High Speed Digital Subsystem and ClockSyncTrigger (CST) features of the TestStation platform come standard with the TestStation LX2.

TestStation LX is a cost-effective in-circuit test solution providing high-volume electronics manufacturers with reliable, high-quality test for the latest printed circuit board assembly technologies. Configurable from 256 to 7,680 test pins, it is a high-capacity in-circuit test solution. Advantages: The TestStation LX in-circuit test system features: » Configurable from 256 to 7,680 pins » Capable of testing large, complex, and heavily integrated PCBs » Safe, accurate, and reliable electrical test » Exceptional diagnostic accuracy » Designed for fast test throughput Features and Options: The TestStation LX test system supports all the standard and optional features of the TestStation Platform, but is unique in the following ways: » High capacity test solution » Configured up to 7,680 pins » Comes equipped with built-in features for testing large, complex, and heavily-integrated PCBs. » Supports up to 30 pin card slots » Can be configured with 128L and 124 Hybrid pin cards

Affordable In-Circuit Test The TestStation LH in-circuit test system is a lower-cost, small footprint, feature scalable version of Teradyne's popular, award winning TestStation product family. TestStation LH features SafeTest protection technologies for accurate, reliable, and safe testing of the latest low-voltage technologies. Advantages: The TestStation LH in-circuit test system features: » High fault coverage » Safe low voltage test » Fast test throughput » Exceptional diagnostic accuracy » Proven test reilability » Scalable test capabilities » Low cost of ownership » High pin count » Small footprint Features and Options: The TestStation LH system supports all the standard and optional features of the TestStation platform, but are unique in the following ways: » Economical, small footprint, feature scalable system » Satisfies low and high pin count applications » Supports up to 16 pin card slots » Configurable with analog only, pure pin, hybrid, and high-density pin cards » Pin count ranges up to 2,048 and 4,096 pins

Redefining the Boundaries of Vibration Control SignalStar Matrix sets the standard for control performance in multi shaker applications. Matrix provides both multishaker vibration control and high channel count single shaker vibration control on the DSP centric Abacus signal processing platform. Multishaker vibration control, 2 to 16 shakers Multiple and single shaker vibration control, 40 to 1024 input channels 24-bit ADC and DAC with 120 to 150 dB dynamic range Optional local throughput disk Full suite of application software with an intuitive interface

Catering to the Challenges of Large Channel Count Applications SignalCalc Savant is a dynamic signal analyzer that maintains realtime analysis, accurate cross channel measurement and recording rate performances for thousand channel systems. The distributed architecture further allows you to place data acquisition close to the measuring transducers thereby eliminating the error due to mismatched transducer cables. 40 - 1024 input channels Networked chassis with 1 Gigabit, Ethernet to host 49 kHz analysis bandwidth (97 kHz optional) Simultaneous sampling across all channels Storage to disk Intuitive software interface with features specific for high channel counts Powerful multi-channel analysis and features

Modular and Expandable Portable Dynamic Signal Analysis SignalCalc Mobilyzer provides dynamic signal analysis capabilities in the lab or on the go with a portable and powerful package. With up to 32 inputs, plus 8 tachometer inputs per chassis, the Mobilyzer empowers the vibration analyst to get measure all necessary information with simultaneous sampling. 8-32 input channels, 2-8 sources 2-8 dedicated tachometer inputs Up to 150 dB dynamic range 49 kHz analysis bandwidth (97 kHz optional) Intuitive software interface Powerful multi-channel analysis and features

Comprehensive vibration control and analysis signal star vector incorporates the dsp centric abacus hardware in a modular, expandable system, providing comprehensive vibration control capabilities with powerful analysis features. The signalstar user interface makes vector easy enough for the novice while providing advanced control and analysis features to meet the most demanding test requirements. 4 to 32 input channels 24-bit adc and dac for 120 to 150 db dynamic range 32-bit floating point digital signal processors channel selectable iepeicp power full suite of vibration control and analysis: sine, random, classical shock, transient shock, srs shock, mixed mode (sine and random on random), time replication, and dynamic signal analysis intuitive user interface advanced vibration control and analysis features optional local throughput disk

A Highly Evolved Shaker Control System The Signal Star Scalar controller is designed as a capable and user friendly vibration controller suitable for small channel count applications. Scalar offers the same control quality as the high powered Vector because it shares the DSP architecture and control algorithms with Signal Star Vector and Matrix. Scalar can be configured to meet your current needs and later upgraded as your requirements increase. 2 to 8 input channels 24-bit ADC and DAC for 120 to 150 dB dynamic range 32-bit floating point digital signal processors Channel selectable IEPEICP power Full suite of vibration control and analysis: sine, random, classical shock, transient shock, SRS shock, mixed mode (sine and random on random), time replication, and dynamic signal analysis Capable of running via Ethernet or via the onboard CPU by connecting a keyboard, mouse, and monitor Intuitive and simplified user interface

All SignalForce products and vibration test systems, or vibration shaker systems, including high quality accessories such as head expanders and slip tables, are manufactured in the USA or the UK acquired and integrated shaker manufacturers Gearing & Watson Electronics, Ltd. and Ling Electronics, Ltd. (Genuine Ling). Sound and vibration test equipment, electrodynamic vibration systems and vibration tables. Product service is provided from both direct and partner service centers located around the globe, with direct service centers on both coasts of the USA, the UK, China, and India. SignalForce Shakers Complete Vibration Test Systems SignalForce Vibration Test Systems (both air- and water-cooled) are available as turnkey vibration test systems that include: shaker tables, power amplifiers, slip tables, shaker head expanders, fixtures, thermal barriers for environmental test.Sales and support are adept at understanding user applications and providing properly configured test solutions to meet both current and future needs.

When designing head expanders or fixtures 3D Models are produced using the complete moving system to ensure that all resonances that might be excited are investigated. At least 20 mode types are usually considered. Head expanders are available as round or square shapes, made from cast magnesium or aluminium or as weldments, depending on the required size, operating frequency and budget. Signal Force offers a selection of slip tables together with head expanders and fixtures to accommodate a wide range of applications that facilitate your vibration testing. Monobases Slip tables Head Expanders Fixtures Noise Reduction Enclosures Chamber Interfaces Amplifiers

The SignalCalc Ace weighs just over a pound, and packs an unprecedented signal processing punch: four input channels, two output channels, one tachometer channel, 40 kHz standard realtime rate (94 kHz optional), and over 120 dB dynamic range. Ace transforms any Notebook computer into a high precision dynamic signal analyzer, one that can travel with you and work professionally - even in the absence of line power.

The SCS Precisioncoat spray and dispense system precisely applies 100% solids, solvent-based and water-based coatings, such as photo-resists, acryclics, adhesives, solder mask and anti-microbial coatins, to virtually any surface or substrate, with maximum accuracy. Common coating applications include.

Temperature range: RT ~ 65 °C (Changeable according to user's demand) Temperature stability: Less than ± 0.2 °C Temperature uniformity: Less than ± 1.0 °C Volume: 200L, 480L, 600L, 1000L and (Different size of chambers are available on users demand.)

The world’s only just-in-time inline programming. The RoadRunner family streamlines the manufacturing process, reduces cost and minimizes operator errors for a lean manufacturing process. The RoadRunner slides into a slot on the SMT pick-and-place machine. A four-probe operation takes devices from tape input to place in sockets for programming. After programming a conveyor delivers the devices to the SMT machine’s pick-point just-in-time for placement on the circuit board just in time. Configurable and Versatile: The RoadRunner family supports all major SMT machines.

Temperature range: 105 ~ 145 ? Temperature stability: Less than ± 0.5 ? Heat-rate: RT 140 ? within 60 minute Humidity range: 100% RH Humidity Stability: less Than ± 15RH Pressure range: 0.2~2.0kg ? G Volume: 48L, 70L and 183L and (Different size of chambers are available on users demand.)

Smartscope CNC 500 offers great value and high precision with superb optics mounted on a bridge type support.

Features : Travel ( XYZ)mm axis:( 500 x 450 x 200)mm