Instrumentation Equipment Dealers in Broadway, Chennai

We are a renowned supplier of Control Panels based in Tirupati, Andhra Pradesh. The panels we offer are of good quality we easy to use buttons and switches. The indicator lights have a bright glow and are long lasting. The panels are easy to install. Our prices on bulk orders are the best in the industry. We guarantee deliveries on time and in good condition.

• length: 180cm

Bed Head Units shall be constructed from aluminium extrusion with round and smooth shape corners and shall be 180cm in length per each patient. The unit shall have three physically separated compartments (for low and extra low voltage electrical services and for medical gas services). The unit shall provide a safe, efficient means of delivering services to patients/staff in both general and special care applications. The unit shall have smooth curved surfaces, no visible screws. Installation of the unit shall be carried out easily by aluminium rail-brackets which allow simple horizontal and vertical alignment taking into account any wall high spots or unevenness. Removal of the covers for maintenance and pipeline connection shall be easily. The unit shall consist of a number of modular extrusion capable of being joined together to form a carcass to suit the particular application. The unit shall have a backspin which shall incorporate an area which is 95x22mm for medical gas pipes. Segregation of services ie. Extra low voltage (< 48 volts), low voltage (< 500 volts) and medical gases shall be maintained throughout. Medical Gas and Electrical services shall be separated by a separator inside unit. Electric power feedings shall be 220V/50Hz. The middle compartment of the unit shall be used for medical gas outlets and electrical services but gas services and electric services shall be physically separated. Upper and lower compartments of the unit shall be used for reading and indirect lights and necessary electrical wirings. The lower cover of the unit shall have a 60cm opening for 1x18W reading light illumination. The upper cover of the unit shall have two 60 cm openings for indirect light illumination. There shall be transparent glass which moulded from SAN material. Reflector sheet shall be used under reading and indirect light to enhance the illumination. Both sides of the unit shall be closed by aluminium covers. All cables and terminal block used inside unit shall be non- flammable type. Electronic start ballast shall be used for reading and indirect lights. The unit shall be manufactured in accordance with forth-coming international and European standards, ISO 11197 and EN 793 for “Medical Supply Units” to HTM 2015 and 2022 and to latest edition of IEE and NEC regulations. The aluminium extrusion unit shall have an electrostatic powder paint finish on all external surfaces. Unit shall be supplied pre-piped, pre-wired and fully tested. The minimum mounting height of the unit shall be 1.7 meters from the finished floor level. All removable covers of the unit shall be earthed. Electric power feedings shall be 220V/50Hz. The unit shall consist of following services for each patient, 1. 1 no of Oxygen outlet, ISO 9170:1990 and BS 5682:1992 compatible 2. 1 no of Medical Vacuum outlet, ISO 9170:1990 and BS 5682:1992 compatible 3. 2 no of double unswitched BS 13A standard electrical socket 4. 4 no of potential earthing node 5. 1 no of RJ11 telephone and RJ45 data socket 6. 1 no of 36 Watt fluorescent tube with electronic start ballast 7. 1 no of 18 Watt fluorescent tube with electronic start ballast 8. 1 no of Nurse call provision 9. 1 no of Two gang switch for reading and indirect light The standard range of Patient Bed Head Unit shall be “CE” marked under the Medical Devices Directive 93/42/EEC with approval body number. Under this directive, the specified products shall be classified as Class IIa Medical Devices.

The world's most accurate hot-wire anemometer with a 2% accuracy - a research-grade multi-function instrument with detachable compatible probes. Probe Compatibility feature allows you to have spare probes. Detachable probe. Automatic Flow Rate Calculation function. Large data storage, stores up to 20,000 measurements. Differential Pressure available as an option.

• Material: Silicon Rubber
• Length: 15Cm
• Application: Instrumentation
• Feature: Durable, Flexible, Long Life
• Warranty: 1year,1year

We are one of the most trusted Suppliers of high quality Instrumentation Cables. We offer Instrumentation Cables in specifications demanded by clients. Our Instrumentation Cables are responsible for smooth communication of low level signals from electronic transmitters. Manufactured from high grade raw material, our Instrumentation Cables can be availed at the market leading prices. Attributes Quality assured Durable Offer high level of safety Market leading prices

• Type: Legrand Mylinc One Way Switches
• Size: 118mm*70mm
• Max. Current: 13A
• Color: White
• Material: PC panel, PC back, brass connection
• Max. Voltage: 220V-250V

We are the main supplier of this product.

• Type: Mdf Panel
• Material: Mdf, 8*4
• Thickness: 10-15mm, 15-20mm, 20-25mm, 5-10mm
• Application: Buildings, Home, Kitchens
• Color: As per our catalogue
• Feature: Easy To Install, Flawless Finish, High Quality
• Position: Interior
• Finishing: Laminated

Green Panelmax Plain MDF is a high-strength panel made from wood or lignocellulosic material which is refined into fibres and then reconstituted with a resin binder at elevated temperatures to form panels which can be used for construction of interiors and furniture, among various other applications. Being manufactured from 100% agro-forestry timber, it is also eco-friendly and an ideal substitute for solid timber and other non eco-friendly panels.   Green Panelmax Plain MDF is available in :Grades:Grade I (Exterior grade) boards are made with special melamine formaldehyde formulated resins which make them ideal for use in water and moisture prone areas.Grade II (Interior grade) boards can be used in the construction of all types of interiors and furniture.Thicknesses: 2.3mm, 2.5mm, 3mm, 4mm, 5.5mm, 8mm, 11mm, 12mm, 15mm, 17mm, 18mm, 25mm, 30mm and 35mm.Sizes: 8’X6’; 8’X4’; 7’X6’; 7’X4’ 6’X 4’ and 6’X 3’.We also concentrate on all types of turnkey projects (material supply and fabrication) for commercial and re sidential and can supply the material on knock down mode with post forming / PVC Foil membrane shuttering as per customer specification.

• Material: Silicon Rubber
• Length: 40-50mtr
• Application: Industrial
• Inner Material: Aluminium, Copper
• Thichness: 0.5-1mm, 1.5-2mm
• Packaging Type: Box

• Thickness: 2mm - 25mm
• Shape: Square
• Color: Brown
• Size (sq. feet): 8' x 6'

Madras Cable Corporation manufactures LT cable( low tenson cables) & HTcable ( high tension cable). We manufacture Different types of LT & HT cable such as : • PVC insulated fire retardant (FR)• Fire retardant low smoke (FRLS)• Zero halogen fire retardant (ZHFR)• PVC insulated winding wires• Submersible Cables• Single core PVC insulated• Multicore PVC insulated & sheathed• PVC insulated power cables–copper/ aluminum• PVC insulated control cables-copper• XLPE insulated power cables-copper/ aluminum• XLPE insulated control cables-copper• Armoured Cables With Copper / Aluminum Conductors These cables are manufactured with Aluminium and Copper conductor and polymer insulation OurLT & HT cable comprise of conductors, insulation, inner-sheath, armour and outer sheath.These LT & HT Cables are available in aluminum and copper conductors. These cables are manufactured withsolid/Stranded Circular/ Shaped Aluminium / Copper Conductor. Stranding makes Cables flexible and easy to handle.Our HT cable are manufactured using insulation three layer two of semi conductor compound and one layer of XLPE compound but in LT cable insulation only in one layer of XLPE for bear the High voltage. We provide customers with different types of insulation that includes - PVC, HR PVCand XLPE. The inner & outer sheaths can be PVC, HR PVC, FRLS, HR-FRLS or FR depending upon the application and requirement of customer. Applcations: Railways Mining IndustryOil & Gas RefineriesAgriculture IndustryPharmaceutical IndustryChemical PlantsPulp & Paper IndustryGreen EnergyPower generation plantsPower transmission equipmentsPetrochemical PlantsMachineriesBuilding ConstructionsElectrical Trains and many ......

AirSep's VisionAire 5 Oxygen Concentrator is light, quiet and efficient making it an ideal concentrator for full time oxygen therapy users. With nearly silent operation, VisionAire 5 provides up to 5 LPM of continuous flow oxygen 24-hours a day, 365-days a year. VisionAire is compact, easy to use, and virtually maintenance free so it's easy to accommodate in your home. VisionAire is built to last with durable construction, a sophisticated internal motor, and a surprisingly low price.LIGHT & QUIETVisionAire 5 weighs just 30 pounds and is equipped with four caster wheels and handles so it can easily be moved from room to room in your home. It offers nearly silent operation, with a sound level of just 40 dBA, so it is great for people who are sensitive to noise; and it provides up to 5 liters per minute (LPM) of continuous flow oxygen 24-hours a day. Many oxygen therapy users find it convenient to have a second VisionAire unit for use away from home, in an RV or at a lake house, or even on a different floor of the same home.ENERGY EFFICIENTVisionAire 5 is designed to be in constant use so AirSep built in a sophisticated, energy efficient motor that consumes a low average of 290 Watts of power per hour. It's a great option if you're looking to keep your oxygen expenses down.EASY TO USE & VIRTUALLY MAINTENANCE FREEThe VisionAire Oxygen Concentrator is easy to use, easy to clean, and virtually maintenance-free. On the front of the unit a simple On/Off Switch and a convenient Flowmeter Adjustment Knob let you control overall operation. Maintenance is quick and easy too; just wipe the outside of the cabinet when needed. There are no filters to worry about and no oxygen bottles to change.CONVENIENT HUMIDIFICATIONVisionAire 5's easy-to-use humidifier bottle holder, with velcro holding strap, is compatible with all standard bubble humidifiers; and it provides a trouble free connection for the humidifier and oxygen tubing at the top of the unit where it's most convenient.SAFE & SECUREImportant safety features of the VisionAire 5 include a back-lined Flowmeter for viewing accuracy and proper setting, a locking flow, and overdraw protection. Each VisionAire 5 is equipped with a resettable circuit breaker, a dual-function compliance/hour meter, and well-defined system of audible and visual alarms. A visual low oxygen concentration indicator on the top of the unit warns you if there is ever a problem with oxygen concentration levels.

EB Metering panels are to be installed in EB power supply input point at the resident of site lead has to be taken after the EB meter from this panel.

Our organization is a prominent Exporter and Supplier of Pressure Transmitter from India. The Pressure Transmitter is used for electronic monitoring of system pressure for general industrial applications. It is designed with utmost precision using high grade stainless steel and offers a variety of pressure ranges, process connections, electrical connections, and output signals. Thin film and piezoresistive sensor technology of our Pressure Transmitter helps in ensuring repeatability, reliability, and stability. Every Pressure Transmitter is factory calibrated to ensure conformance to its stated accuracy. It is stringently examined to meet durability and performance demands of industrial applications. Also, it is explosion free. Features : Available in flush diaphragm version for use with viscous fluids and slurriesAccuracy 0.5 % of span limit point calibration (0.25 % of span best fit straight line)Broad selection of pressure ranges, engineering units in psi, bar, MPa, kg/cm2, and kPa. Pressure references of compound, gauge, or absolute Temperature class : T6 at maximum ambient 140oF (60oC)T4 at maximum ambient 221oF (105oC)CE conformity : 89/336/EEC (EMC) and 97/23/EC (PED) Transducers Accessories : Remote panel mount displayAttachable indicator displayQuality assurance certificateMaterial certificateCalibration certificateAlloy C-276 diaphragmOptional cable lengthsEPDM and fluorocarbon FKM O-ringsSpecial cleaning to ASME B40.1Cooling elementsWeld adaptersCables and connectors

• Type: Distribution Board
• Certification: ISO 9001:2008 Certified
• Application: Control Panels, Industrial Use, Power Grade
• Color: Grey, White
• Condition: New
• Frequency: 50hz, 60hz
• Tensile Strength: 0-25Mpa, 100-125Mpa, 125-150Mpa, 150-175Mpa
• Feature: Easy To Install, Electrical Porcelain, Proper Working, Sturdy Construction, Superior Finish, Water Proof
• Warranty: 1yr
• Temperature: High Temperature
• Automation Grade: Automatic
• Cooloing System: Air Cooling

• Type: Modular Electrical Box
• Brand Name: Sunklass
• Material: Metal
• Protection Level: Water resistant

We are a leading manufacturer and also a whole sale distributors in the galvanised rustfree metal boxes. As per demand in the market. We provide all modules size boxes. We also provide special size as per costumer requirement. features.:rust free material : tata sheet 3 cutting locking box

• Features: Minimum Maintenance
• Country of Origin: India
• Brand: Bbl

We offer Water Softener System which is use to soften water, by removing the minerals that cause the water to be hard. Water softening is an important process, because the hardness of water in different applications is reduced during this process Of iron exchange by action resins.

We present you with exclusive LT XLPE Cables. The LT XLPE Cables that we provide are made with the use of best quality raw material to facilitate better conductivity. These LT XLPE Cables are well tested under strict industry norms by the team of experts. Our LT XLPE Cables are appreciated for high performance and cost effective prices. As per : S 7098 - BS Standards Features : Longer service lifeThermosetting in natureBetter resistance to surge currentsHigher current rating, higher short circuit rating, approximately 1.2 times that of PVCLow dielectric lossesBetter resistance to chemicals and corrosionHigher insulation resistance – 1000 times more than PVC cablesRelatively higher cable operating temperature 90oC and short circuit temperature 250oC

• Brand Name: Luminous
• Solar Panel Type: Mono PERC
• Operating(Nominal) Voltage: 24V
• Number of cells: 144 cells
• Manufacturer Warranty: 4years
• Frame Material: Aluminium
• Wattage (Wp): 335W
• MNRE Approved: Yes

• Material: WPC
• Thickness: 12 mm
• Color: White
• Features: Termite resistance ,Moisture resistance, Sturdy construction
• Usage/Application: Furniture, Interior Decoration
• Size: 8' x 4'
• Surface Finish: Glossy

Different starting methods are employed for starting induction motors because Induction Motor draws more starting current during starting. To prevent damage to the windings due to the high starting current flow, we employ different types of starters. The simplest form of motor starter for the induction motor is the Direct On Line starter. The Direct On Line Motor Starter (DOL) consist a MCCB or Circuit Breaker, Contactor and an overload relay for protection. Electromagnetic contactor which can be opened by the thermal overload relay under fault conditions. Typically, the contactor will be controlled by separate start and stop buttons, and an auxiliary contact on the contactor is used, across the start button, as a hold in contact. I.e. the contactor is electrically latched closed while the motor is operating.

• Type: Distribution Board
• Certification: ISI Certified
• Application: Control Panels, Industrial Use, Power Grade
• Color: Green, Grey, Light Green, Sky Blue
• Condition: New, Used
• Frequency: 50hz, 60hz
• Feature: Easy To Install, Electrical Porcelain, Four Times Stronger, Sturdy Construction, Superior Finish
• Phase: AC Single Phase, AC Three Phase
• Temperature: High Temperature, Low Temperature, Medium Temperature
• Automation Grade: Automatic, Fully Automatic, Semi Automatic
• Cooloing System: Air Cooling, Oil Cooling

Application Area: Suitable for outdoor installation and harsh environment, Combinable and extendable in all directions, CPRI Type Tested, ASTA Certified, Degree of Protection: IP 65, Material : High - quality PC(Polycarbonate),Burning behavior: Glow wire test IEC 60 695-2-11:960 degree C. UL Subject 94: V-2, flame retardant, self - extinguishing. Tme modular system allows a flexible adaption to the local available space.The polycarbonate UV - and corrosion - proof material and the degree of protection IP 65 allow an indoor and outdoor installation,Toxic behavior: halogen free, silicon free

• Material: Aluminium, Plastic
• Application: Cabinets, Glass Doors, Main Door
• Color: Black, Grey, Silver, White
• Voltage: 12volts, 18volts, 24volts, 6volts
• Operating Temperature: 0-10Degree C, 10-20Degree C, 20-30Degree C, 30-40Degree C, 40-50Degree C
• Feature: Accuracy, Less Power Consumption, Longer Functional Life, Simple Installation

• Features: Rugged design, Superlative performance, Best grade materials

• Type: Access Control System
• Material: Aluminium, Plastic
• Color: Black, Grey, Silver, White
• Feature: Accuracy, Less Power Consumption, Longer Functional Life, Good Quality, High Strength
• Usage: Record attendance, Industries
• nstallation Type: Wall Mounted

• Voltage: 110V, 220V, 280V
• Application: Elevator
• Shape: Rectangular
• Material: Mild Steel, Metal
• Driven Type: Electric
• Condition: New,Old

• Material: Plastic
• Connection: 3 Way
• Brand: L&T
• IP Rating: IP33
• Power: DC
• Automatic Grade: Automatic

• Phase: Three Phase
• Rated Voltage: 415 V
• Automation Grade: Semi-Automatic
• Material: MS
• Surface Treatment: Coated
• Usage/Application: Industrial

• Interfaces: Weigand
• Language: English
• User Capacity: 10,000
• Operating System: Linux
• Memory Capacity: 4 GB
• Identification Time: <300 ms
• Size/Dimension: 134.0mmx33.0mmx305.0mm
• Door Access: Face, Password, QR code, Card
• Network Interface: LANx1, Wiegand Inputx1, Wiegand Outputx1, RS485x1, Alarm Inputx2, Alarm Outputx1, USB2.0x1, Lockx1
• I Deal In: New Only
•  :  

• Size: 0-10cm, 10-20cm, 20-30cm, 30-40cm, 40-50cm
• Type: Automotive Turned Components
• Material: Aluminium, Brass, Stainless Steel, Steel
• Thickness: 0-20mm, 20-40mm, 40-60mm, 60-80mm
• Application: Machinery Use
• Type: Adaptor, Bush, Clip, Coupling, Elbow, Pipe, Tee
• Color: Brown, Golden, Grey, Metallic
• Finishing: Coated, Non Coated
• Feature: Anti Sealant, Durable, Fine Finished, Flexible, Heat Resistance, Light Weight, Shocked Resistance