Instrumentation Equipment Dealers in Ekkaduthangal, Chennai

• Brand Name: Embsys
• Warranty: 1yrs
• Country of Origin: China
• Frequency: 50Hz

• Country of Origin: China
• Certification: CE Certified
• Warranty: 1yrs

Solar Radiation Shield It is commonly used on weather stations to protect sensors from the sun and rain. Due to the dense ventilation holes around the radiation shield, the shield can ensure that users get more accurate measurement results. The solar radiation shield has built-in multiple sensors, which can measure PM2.5, PM10 and other elements at the same time.   About - Solar radiation shield This solar radiation shield can protect the built-in sensor from direct solar radiation and sun reflection from the ground. The high-strength anti-ultraviolet material can make it work in rain, snow, strong wind or harsh outdoor environment for a long time. Low thermal conductivity, avoiding measurement errors caused by direct sunlight.   Solar radiation shield description The outdoor solar radiation shield is a high-quality product that can protect the sensor from the weather and avoid errors caused by solar radiation and precipitation, thereby ensuring data accuracy. It is suitable for different environmental sensors, such as PM2.5, PM10 sensors, etc. This solar radiation shield has the characteristics of sturdiness, high flexibility, low thermal conductivity, and UV resistance, making it widely suitable for outdoor harsh environments.

• Power: 1-5 KW
• Voltage: 415V
• Ambient Temperature: 42 Degree C
• Material: Mild
• Frequency: 50Hz
• Current: 40 A
• Relative Humidity: 98%
• Surface Treatment: Paint Coated
• Ip Rating: IP65

• Accuracy: +-2.0 %
• Brand Name: Accsys
• No. Of Channels: Max 12
• Measuring Range: -200 to 850 deg C
• Decimal Point Format: 1 Decimal
• Resolution: 0.1 deg C
• Dimension: 96x192x350 cm
• Relay Contact Rating: 230 V AC/DC, 5A
•  Display:  4 digit

• Features: Android OS with touch screen control Graphic display available in 7" and 10"

This Fire alarm control panel is a master unit of fire alarm system. Control panel front-end has a interactive display with touch screen control. Back-end has connectivity for fire detection line and audio notification line. Total system works on 24V DC. Panel has built in 230V to 24V power supply unit. This unit has built in battery charger and provision for SMF battery.

• Temperature Range: 0 to 1250 deg C
• Accuracy: +/- 2.5 deg C or +/- 0.75%)
• Application: Industrial
• Material: Stainless Steel
• Probe Length: 0 - 150 mm
• Probe Diameter: 0.5 - 8 mm

We are one of the leading Manufacturers and Suppliers of Magic Programmable Logic Controller in India. The Magic Programmable Logic Controller which we offer is easy to operate and requires low maintenance. Based on advanced technology, the Magic Programmable Logic Controller has hi-tech features. We offer the Magic Programmable Logic Controller to the clients in excellent packaging. Feature Total Machine Controller Parison Controller Specifications 4 Line 20 Characters Alphanumeric LCD36 Key Tactile Keyboard24-32 Digital Inputs NPN PNP 24V DC 10ma24-40 Digital Outputs 24V DC 2A6 Analog Outputs 8 bit 24V DC 2A (no amplifier card required for driving Proportional Valves)4 Analog Inputs 12bit8 Channel PID temperature Controllers

• Brand Name: VAMOSYS
• Warranty: 12 Months
• Car Make: VAMOSYS
• Packaging Details: cardboard packaging
• Supply Ability: 1000 Box/Boxes per Month
• Place of Origin: hong kong
• Quality: High-Quality

• Switch Control: Static
• Material: Mild Steel
• Application: Power Distribution
• Phase: Three Phase
• Power Source: Electric
• Automation Grade: Automatic
• Frequency: 50 Hz
• Input Voltage: 380 V
• IP Rating: IP44

We are pleased to introduce ourselves as the leading supplier of the above product, which is used to maintain the Power Factor (PF) above a specified limit. ELITE APFC Panel has a Micro-controller based Programmable Controller, which switches the Capacitor banks of suitable capacity Automatically, in multiple stages by directly reading the reactive load (RKVA) which works in the Principle of VAR Sensing, tends to maintain the PF to 0.99 Lag. The capacitor banks may be selected in number of stages as 4/6/8 according to the load pattern. The TNEB is installing the Digital Electronic Energy Meters for Power and Welding Service consumers having 25HP and above, which has the provision of showing the PF and insisting to maintain the average Power Factor above 0.85 Lag.   Install ELITE APFC Panel to avoid penalties and enjoy the benefits automatically.   WHAT IS POWER FACTOR (PF)? Power Factor is the ratio between the energy drawings (KVA) and the effective energy utilized (KW) i.e., PF=KW/KVA   WHY POWER FACTOR MUST BE MAINTAINED? By maintaining a better PF we can reduce the energy drawn (KVA), thus reducing the current passing through the electrical circuits to the maximum extent possible (even up to 50%) thereby reducing the down time, reduction in heat losses in turn increases the life of the equipment. Otherwise, for every reduction of 0.01 from 0.85 up to 0.75 PENALTY is 1% and below 0.75 it is 1.5% from 0.85 of the Current Consumption Charges (KWh) on your Electric Bill. INCENTIVE is also given by the Electricity Board when the PF is maintained above 0.90 @ 0.5 % for every increment of 0.01 on your Electric Bill.   HOW TO MAINTAIN THE POWER FACTOR? According to the load pattern, proper Capacity of Capacitors to be connected. The value of the capacitors to be connected will vary with respect to the load and its existing PF. There are two ways to maintain PF 1. Fixing the capacitors permanently at the load end or at the mains, generally which is recommended for the fixed loads like Pumps, fans etc., and it is not possible for the loads which have variations in the load and PF. 2. The Power Factor can be maintained by installing ELITE AUTOMATIC POWER FACTOR CONTROL PANEL.   ELITE Controller displays the following parameters. Voltage: R, Y & B Phases, Amps: R, Y & B Phases Present KILOWATT (utilizing current) Present RKVA demand (Required capacitors to attain UNITY power factor) Present KVA (drawing current),Present Power Factor (PF normally 0.99lag) No. of capacitor Banks ON or OFF,Provision to indicate Imbalance load Provision to indicate the change in phase sequence AEE’s PF Controller has built-in protections for High voltage cut-off AEE’s PF Controller has built-in protections for Low voltage cut-off The values and stages can be made as per customer’s request Higher Capacity Panels up to 450 KVAR can be supplied against Order IMPORTANT BENEFITS FOR INSTALLING FOR ELITE AUTOMATIC POWER FACTOR CONTROL PANEL Fully Automatic, no Manual Interventions is required. HEAVY Power Factor PENALTIES on the consumptions are ELIMINATED. INCENTIVES are received on every payment made. Optimize the capacity by reducing the maximum demand KVA. Avoids excess demand charges. Considerable REDUCTION in consumptions (KWH) charges. Improvement in line voltages. Excess Drawing of power is absolutely ELIMINATED. Reduced line current losses and cable overheat. Enhanced life of electrical circuits. Avoids overloading of Distribution Transformers. Additional service connections in existing generation of power by reducing energy losses. Reduced line losses benefits SEB’s and Nation. Avail DEPRECIATION as per Income Tax Depreciation Schedule. OUR PANEL COMPRISES OF VAR SENSING CONTROLLER with LCD display to show all the line parameters. 3 Nos of C.V.T’s (Current Voltage Transducers) of ratio 1:400 CAPACITORS of SIEMENS – EPCOS make – MPP type – 440 V / 50 HZ – Delta connected CONTACTORS to switch in & switch out the capacitors of ABB / SCHNEIDER/BCH make fixed individually to all the stage capacitors at 440 V / 230 V AC coil. MCB/ 3 Pole as Incomer of ABB / SCHNEIDER make. Provision of INDUCTOR COIL individually to all the capacitors to cater the in- rush currents. To Maintain the OPTIMUM POWER FACTOR load balancing to be Carried out in your Premises compulsorily. After providing our APFC panel the readings of KWH, KVAH, Pr.PF, Avg.PF from the EB meter has to be given to our office once in a week to monitor the improvement of PF.  

In the series of our products, we are also engaged in manufacturing and supplying a quality range of EB Metering Panels. For the benefits of our clients, these products are stringently tested on various parameters and are authenticated as per the international standards. All these products are highly appraised for their features like high tensile strength, durability and cost effectiveness.Features: Low maintenance , Low maintenance , Easy to install

Features Air insulated switchgear Switchgear conforms to IEC62271-200 Vacuum interruption technique Offering both indoor and outdoor installation Available in both withdrawable and fixed version circuit breaker Compact and robust design Constructed using power coated sheet steel making it a highly reliable switchgear Interchangeable circuit breaker Fully extensible or non-extensible option Highly customised version available Designed for fast and easy installation Use of maintenance free vacuum circuit breaker Simple maintenance Compatible with latest SCADA / DCS / PLC Reliable and safe operation Safety Fully type tested according to IEC 62271-200 Fully compartmentalised construction with high degree of protection Automatic protective shutter Metallic enclosure, earthed shutter and partition Closed door rack-in and rack-out of circuit breaker ensuring full safety to the operating personnel Fitted with safety interlocks Tool based accessibility

• Phase: Three Phase
• Power: Electric
• Material: Mild Steel
• Frequency: 50 Hz

• Brand: Elmec Heaters & Appliances
• Material: Stainless Steel
• Country of Origin: Made in India
• Packaging Type: Box
• Frequency: 50 Hz
• Cable Length: 2 Meter

We have emerged as the prominent manufacturer, trader and supplier of Welding Automation Machine. This automation machine is developed by using top quality material keeping in mind the set standards. Our offered automation machine is highly valued for its performance & finishing. The given automation machine is provided in diverse stipulations as per the requirements of clientele.Our range of Welding Automation Machines is widely used for TIG and MIG machines, for fabricating diverse products. Our products are available in various designs such as linear, circular welding and others, to match with the manufacturing needs of our clients. Accordingly, our range is engineered using optimal quality material resulting in high performance and longer service life.  

• Repeatability: Humidity: ± 1% RH, Temperature: ± 0.1°C
• Hysteresis: Humidity: ± 1% RH
• Power Supply: 12V DC
• Reverse Polarity Protection: Yes
• Protection: Electronic Circuit Case: IP 65, Sensors Capsule: IP 40
• Output Load (RL): 4

PVC FLAT CABLES ANTI-AGING H07VVH6-F, Particularly suitable for Supply and Control circuits, Lifting Equipements, Material Handling Equipments, Cranes, Hoists, Festoon cable track system, lifting equipments, material handling equipments, Conveyors, telescoping jetways, robots, etc.   Specifications: ♠ Sheathing colour: Black♠ Operating temperature -5 °C 70 °C♠ Operational voltage 300/500V♠ Insulation class 2/3♠ Comply with CEI 20 - 22 II (Flame resistant)♠ Internal conductors with flexible PVC sheathing progressively numbered, plus earth conductor (yellow/green)  

  Control Panels for controlling heater output are offered with digital/analog temperature controller, thermocouples, and necessary indicating devices. They can be made strictly as per customer specifications

Onebee Wireless PIR sensor permits exact adjustment of the detection zone to suit individual requirements.Light ‘ON’ time and twilight threshold are easily set by control dial.Suitable for mounting on walls or ceilings. Suitable for interior use. Detect human movements and sense the motion. 5 –level of sensitivity and work mode adjustment and 45 degree ( ) coverage. Inbuilt battery.