Instrumentation Equipment Dealers in Nolambur, Chennai

Switchgear panels comply with applicable International and Indian standards. Panel Boards meant for Corrosive atmosphere, Mining and Marine environmental condition Switchgear panels suitable for Hazardous areas Fixed and Draw out type panels Copper/Aluminum Bus bars with proper insulating supports/insulation Interlock provision Medium Voltage (MV) and Low Voltage (LV) switchgear panels Sheet steel enclosures Spring operating mechanism with electrical anti-pumping provision Earthing terminals as per applicable norms and standards Single or double front type panels Type and routine tested panel boards Cable entry as per customer's requirement

• Certification: CE Certified
• Application: Industrial
• Condition: New
• Automatic Grade: Automatic
• Power Source: Solar
• Efficiency: 70%
• Operating Voltage: 12V

We manufacture and supplies Servo system as per the customer requirements,such as assembly, pressing, drilling, Material Handling Systems, Welding System, etc.,

• Type: Energy Saver Panels
• Weight: 0.5-1kg, 1-2kg, 2-3kg, 3-4kg
• Color: Black, Gray, White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Output Type: AC Single Phase, AC Three Phase, DC
• Frequency: 50hz, 60hz
• Feature: Auto Cut, Easy Operate, Shocked Proof, Stable Performance, Works In Low Voltage
• Warrenty: 1year, 2years

HP 802 Small Combo Pack Multi Color Ink Cartridge

• Brand Name: ICD
• Material: ABS, Mild Steel
• Color: White
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Power Source: Battery, Electric, Solar
• Voltage: 110V, 220V, 380V, 440V
• Autoamatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Features: Compact Design, Rigid Construction, Excellent Finish, Microcontroller Based PF Controller.
• Type: APFC PANEL
• Phase: Double Phase, Single Phase, Three Phase
• Warranty: 2 Years
• Country of Origin: India
• Frequency (Hz): 50Hz
• Brand Name: ICD Power Solution

    Model No : MV V12 LBS   Rated Voltage & Rated Current:12kV, 630A Up to 2000A   Frequency : 50Hz   Short Time Withstand Current And Duration: 26.3kA/3Sec   Insulation Level: 28kV / 75kV Peak   Breaker Standard: IEC 60265/ IS 9920   Degree of Protection: IP4X & 5X

Modicon LMC058 Motion Controllers are destinated to the machine builders (OEMs) by offering performant solutions in terms of motion control for synchronized axis, speed control, high speed counting and communication networks. It has been designed in order to satisfy the market requirements in terms of simplicity of installation and evolution.

• Supply Voltage: 7.5 to 45 V DC(without display) , polarity protected
• Output Signal: 4 to 20 mA
• Load: Max.(V power supply -7.5 V)/0.022 A
• Galvanic Isolation: U=2000V AC (input/output)
• Display Range: -1.9.9.9.9-9.9.9.9.9
• Weight: Approx. 800g
• Exxplosion: Intrinsically safe Exia II CT4
• Shock and Vibration Resistance: 4g/2 to 150 Hz as per IEC 60 068-26
• Degree of Protection: IP 00,IP66(installed)
• Condensation: Allowable
• Storage Temperature: 40 to 100 Deg C (-40 Deg F to 212 Deg F)
• Ambient Temperature Limits: 40 to 85 Deg C ((-40 Deg F to 185 Deg F)
• Response Time: 1 sec
• Switch on Delay: Less than equal 5 sec

We design and develop Motor Control Centers or MCC that have the capacity to feed larger loads. We also make Power Control Centers suitable to be installed indoors and work efficiently up to an ambient temperature of 50°C. The MCC These can also be availed with multiple power stabs that help in supporting high capacity industrial motors.The The complete structure shall be rigid, self supporting & free from twists and bends. The panels will be totally dust and vermin proof. MCC Features: * Full voltage non-reversing and full voltage reversing starters * AC variable frequency drives * PLC IO chassis * Solid-state motor controllers * Lighting panels * Transformers * Analog or digital metering PCC Features: * Modular design * Free standing * Floor mounting type using 2.01.6 mm CRCA sheet.

• Color: White
• Size: 50 mm
• Brand Name: Pioneer
• Density: 40 kg/m3
• Compressive Strength: 2.1 kg/m2
• Tensile Strength: 3.7 kg/cm2
• Adhesion Strength: 2.9 kg/cm2
• Bending Strength: 4.0 kg/cm2

We are offering puf panel.

• Phase: Three Phase
• Material: Mild Steel
• IP Rating: IP55
• Operation Voltage: 380 - 460 V
• Cable Entry: Side/Bottom
• Operating Voltage: AC 220 V - 380 V
• Working temperature: 20 DegC - 50 DegC

• Frequency: 48 to 63 Hz
• Brand: ABB
• Input Phase: Three Phase
• Model No.: ACS355
• Input Power: 0.37-45kW
• Ambient Temperature: -10 to 40 Degree C
• Relative Humidity: Lower than 95%
• Minimum Supply Voltage: 380VAC
• Maximum Supply Voltage: 480VAC

Operation theater control panel the most integrated function is required, cleanliness must be kept and the safety of facilities, equipments and devices must be maintained any times. Furthermore, the working environment for medical staff such as doctors and nurses must be considered from the view point of human engineering. The modular operating theatre satisfying those conditions consists of wall, ceiling, and is capable of incorporating not only electrical equipment, medical gas system and lighting gears but all the necessary functions and equipments at need. In addition, the modular theatre has a high availability of extension providing for the introduction of new facility in the future, establishing as well an operating environment with high work ability and enough function. The most complex and challenging area of hospital construction is the operating department.

Chiller Temperature Controller : A special action for -50.0ºC to 50.0ºC range having independent setting for tember as well as delay time (time m for which Comres- sor has to rest before restarting) Hysteresis is also settable between 0.2ºC to 9.9ºC. The delay time is helpful in increasing the working life of the compressor. This is also available for two compressors ( independnet temperatures and the settings) and three compressors.Temperature Controller with Soak : For heat treatment apipilication addiptional time setting time setting is available to maintain the temperature of the furnace or ovan for the desired set time (0.999min) after the temperature has reached the set value.BOD Controllers : For controller of ovan temperature below or above m ambient temperature. The heating or cooling realy will turn on depending on whether wt temperature is above or below the ambjent temperature. Second sensior for sensing ambient temperature is provided. Both relays have independent hysteresis sellings (by keyboard).Temperature Controller With : The facilitynis used in heat treatment or settable rate of rise of temp material testing equipments .Rate of rise is settable by keyboard from 0 to 10ºC/minProfile Temperature Controller : This is useful in obtaining variable temperature profile in an ovan or furnace for heat curing application. The time and temperature data can be led by the keyboard, control action can be on/off or time propotional. this is also useful for testing purpose in Laboratory (Calibration Bath).PID Temperature Controller (Proportional, Integral & Derivative) : This is useful for precise control of temper ature in an ovan, furnce, plastic machinery etc. when job requires high heating during initial period & low heating when temperature stabilizes. Derivative action overcomes sudden changes in temperature due to load changes, integral action corrects the accumulated error.Derivative time constent and intergal time constant have to be set suitable for the machine whose temperaturemis to be controlled, initially, trial and error methodmis required to select these parameters, but once they are set the action gives better control of temperature.Relay output for control of contractor or pulse output for control of SSR is provided. Optionally 0 - 10V output can also be provided for control of SCR firing units.Controller with Analog Input : This is useful in application where transducers are used (i.e. load cell, flow sensor, pressure sensor etc.) The signal can be ) -10V or 4-20m A D.C. Like in other controllers, single set point and two point models are available. These relays can also be used as alternative settings, Calibration through key board is possible.

• Brand Name: Trace automation
• Application: Industrial
• Model: G4
• Usage: Industrial, Laboratory

• Application: Industry
• Operating Voltage: Custom built
• Phase: Three Phase
• Application: Control
• Type of Control Panel: Automation
• Frequency: 50 Hz
• Voltage: 440 V

• Type: Variable Frequency Drives
• Material: Aluminum, Metal, Steel
• Shape: Rectangle, Square
• Application: Factories, Home, Industries, Mills, Power House
• Color: Black, Gray, White
• Frequency: 50Hz, 60Hz
• Connection Type: 4 Way, 6way
• Feature: Dust Proof, Excellent Reliabiale, Fire Resistant, High Mechanical Strength, Light Weight, Maintenance Free, Perfect Shape, Tamper Free, Weatherproof
• Phase: Double Phase, Single Phase, Tripple Phase

We are the main supplier of this product.

We deal custom designed and standard panels for the entire assembly and for fragments, Custom designed panels are available with us based on client needs.  

• Phase: Three Phase
• Rated Frequency: 50HZ
• Rated current: 400A-3150A
• Rated Voltage: 380V
• IP Rating: IP30

panel board accessories, Aluminium Plates, AMF Panels, panel wirings

automation component, Die Castings, Earth Moving Equipment

hvac control systems, buried cable detection system

access control panels, CCTV Cameras, Solar Water Pumps, surveillance systems

We deals in manufacturing of wide range of PCC Profiled Composite Panels

Office Automation System, Home Automation System

plc based systems, embedded product engineering, Industrial Automation System

Relay Panel, Multicrystalline Solar Panel, solar control panel

Caparo is offering Automotive Components which includes Stamping,Welding and Assembling & Tools and Dies and more.

automotive power component, support assembly hanger