Instrumentation Equipment Dealers in Ramapuram, Chennai

• Phase: Single Phase
• Warranty: 1yr
• Input Frequency: 50 Hz
• Display: Digital
• Efficiency: 89%
• Usage: Industrial
• Feature: Durable, Good Quality

• Type: Digital
• Material: Aluminium
• Color: BLUE
• Model Name/Number: ULT200
• Usage/Application: Industrial
• Packaging Type: IP 65
• Brand: ELECTRONET
• Ambient Temperature: 50C

• Warranty: 1 year
• Type: Brake Temperature Sensors
• Accuracy: < +-2.0% FS
• Temperature Range: -20 to 950 DegreeC
• Weight: 30 g
• Interface: CAN 2.0
• I Deal In: New Only
• Sampling Frequency: 32,16,8,4,2,or 1Hz Default = 32Hz
• Usage/Application: Temperature Measurement
• Sensor Type: Infra Red
• Power Supply: 5 to 8 V,Excitation

The Braided Bus Bars were manufactured with Copper wire which is weaved to form a braid. A tube is then attached to each end and compressed to create a connection point. These braided bus bars were fabricated as per customer's requirement at the most competitive rates.

• Average PUF Density: 40 ± 2 Kg/ cu.mtr/ m³
• PUF Blowing Agent: 141B (CFC free)
• Insulation Material: Polyurethane foam
• Polyurethane foam: +90°C to -60°C
• Penal Type: Discontinuous type with cam lock
• M.O.C. Of Cam Locks: Cam locks body material HIPS and male latch is made of nylon Glass field with GI sheet reinforcement
• Type Of Panel Joints: Tongue & Groove Joint with Cam lock and all side rubber gaskets
• Corner Panel Available: 12” X 12” X 162”(Maximum Length)
• Length of wall & ceiling panel: 2032 mm to 12000 mm 80” to 472.5” inch
• MS bolt with thermal breaking cap. 4 mm thickness X 80 X 80 mm Aluminum/MS washer plate for load dis: 90 to 95%
• Vapour Permeability: 5.5mg/PASM.
• 5.5mg/PASM.: Less than 2%
• Less than 2%: Less than 2%
• Compressive Strength at 10% Deformation: 0.21 N/ sq.mm (For PUF only)

• Application: Temperature measurement
• Output Value: 4 to 20 mA
• Input Value: Thermocouple, RTD PT100 & PT1000
• Brand Name: Novus
• Typical Accuracy: Thermocouple and mV plus or mininus 0.1 percent
• Dimensions: 43.5 mm x 20.5 mm D x H

• Features: Developed using high technology, Flawless strength, Latest technology.

• Country of Origin: China
• Certification: CE Certified
• Warranty: 1yrs

• Type: Alarm Panel
• Model Number: RE 104
• Application: Office
• Frequency: 50 Hz
• Material: MS
• Weight: Up to 800 gm
• Brand Name: Ravel
• IP Rating: IP50
• No Of Relays: 3
• Power Supply Type: 230 VAC
• Common Relays Type: Form C
• Relay Contact Rating: 2Amps
• Relative Humidity: 93 +- 2% RH
• Alarm Current: 15 - 30mA
• Normal Operating Voltage: 14- 21 VDC
• End-Of-Line Resistor: 4.7K,1/4watt
• Standby Current: 6.8mA
• Dimensions: (350W X 250H X 100D)

We are offering led slim panel light housings available in 79 in square and round.

• Type: Micro Drive
• Application: Commercial
• Frequency: 60 Hz
• Driven Type: Electric
• Phase: Double Phase, Single Phase, Three Phase
• Voltage Range: 220 V
• Speed: 1440 Rpm

• Application: Office
• Brand Name: MIRCOM
• Model Number: Fx2000
• Voltage: 24 Volt
• Frequency: 50 Hz
• Material: MS Powder Coated Body
• Color: RED
• Zones: 2 Loop
• IP Rating: IP50

• Name: Automation Control panel
• Usage: Industries, Commercial
• MOQ: 1 Set
• Integration: Siemens, Delta, Omron

PLC Automation control panel  Integration: Siemens, Delta, Omron Programming, Commissioning          

• Power: 1-5 KW
• Voltage: 415V
• Ambient Temperature: 42 Degree C
• Material: Mild
• Frequency: 50Hz
• Current: 40 A
• Relative Humidity: 98%
• Surface Treatment: Paint Coated
• Ip Rating: IP65

• Sheel: Custom Made
• Materials Make: As required by sustomers

We are offering motor control center.power distribution panels with air circuit breakers and different feeders as required. all types of custom built panels.

ReliGo Solar system started in order to meet the scarcity of electricity in Tamil Nadu and increasing power rates. We offer wide range of Solar products like Solar home lighting systems, solar roof-top systems, solar power packages for home & Schools, solar power plants for colleges, hospitals, small scale industries and commercials buildings & shops. Our solar power plants for Schools, colleges, SME'S, Office, home rooftop systems are affordable and cost-effective where we give solar packages at best price in industry. We have our head office in Chennai and branch office in Madurai. We installed solar home lighting systems in Chennai, Thanjavur, Madurai, Coimbatore and other cities in Tamil Nadu.

• Brand Name: Embsys
• Warranty: 1yrs
• Country of Origin: China
• Frequency: 50Hz

With our years of experience, our company name figures amidst the most responsive and responsible Suppliers of electrical panel board accessories. Interested buyers can contact us anytime for placing orders; we ensure timely delivery of the same.

We manufacture and supplies Servo system as per the customer requirements,such as assembly, pressing, drilling, Material Handling Systems, Welding System, etc.,

Connection of up to 32 Battery Dryers with 240 Drying Hoppers. Optimized Control: Manages internal process of the dryer with failure analysis. Dew Point Recording: In the presence of a dew point sensor the actual values are captured and recorded over a 12 hour time period. Management of Material Data: Includes all drying hoppers attached to the networked dryer. Central Error Display: All error messages are transferred to the M7.2 control and centrally displayed.

Honeywell make temperature transmitter, pressure transmitter, differential pressure transmitter, rtd, flow transmitter, level transmitter, transducer ( pressure, differential pressure, displacement, torque), limit switch.

The Axis family of microprocessor based controllers combine a high degree of functionality and reliability at a very low price, in 3 different formats : 116 DIN, 18 DIN, 1 4 DIN.The Axis family satisfies low cost basic control requirements and also provides advanced features such as motor position control, phase angle power control and Setpoint programming Two 4 digits displays and one LED bargraph to display the PV and SP. Easy to configure. Two different configuration levels provide easy access to parameters.

• Phase: Single Phase
• Brand Name: Faldic
• Power Source: Electric
• Phase: Single Phase
• Voltage: 210-240 V

• Phase: Three Phase
• Body Material: Iron
• Color: Grey
• Function: Automatic Control
• Material: Aluminum Alloy

Formoplastic is proud to offer the SIEPAN 8PU range of MCC’s and PMCC from the home of Siemens.Formoplastic was one of the first partner in the franchisee model of this business of Siemes and together with them we have executed many prestigious projects. High degree of reliability by virtue of type tested assemblies. Separate function compartments. High degree of safety of operation personnel. 8PUL4.5. Power Control Center Type tested assemblies upto 5000 amps possible. Easy to operate and maintain. Fewer joints between busbar and ACB’s makes the panel cooler. 8PUF4.5, 4.6. Non Draw out Motor Control Center Any combination of modular functional units. Easy replacement of functional units. Direct alignment with SIEPAN 8PU L4.5 8PUT3.5 Non Drawout Power Supply Feeder Panels Separate vertical busbar chamber. Compartmentalized feeders. Cable compartment at rear for safety and ease of termination.

In the series of our products, we are also engaged in manufacturing and supplying a quality range of eb metering panels. For the benefits of our clients, these products are stringently tested on various parameters and are authenticated as per the international standards. All these products are highly appraised for their features like high tensile strength, durability and cost effectiveness. features: low maintenance low maintenance easy to install.

Sleek. Rugged. Flexible. Red Lion Is Your Choice for HMI Panels. From factories to extreme remote locations, Red Lion's HMI solutions enable customers to easily connect, monitor and control processes across a diverse range of industries that include manufacturing, oil and gas and waterwastewater.

We are pleased to introduce ourselves as the leading supplier of the above product, which is used to maintain the Power Factor (PF) above a specified limit. ELITE APFC Panel has a Micro-controller based Programmable Controller, which switches the Capacitor banks of suitable capacity Automatically, in multiple stages by directly reading the reactive load (RKVA) which works in the Principle of VAR Sensing, tends to maintain the PF to 0.99 Lag. The capacitor banks may be selected in number of stages as 4/6/8 according to the load pattern. The TNEB is installing the Digital Electronic Energy Meters for Power and Welding Service consumers having 25HP and above, which has the provision of showing the PF and insisting to maintain the average Power Factor above 0.85 Lag.   Install ELITE APFC Panel to avoid penalties and enjoy the benefits automatically.   WHAT IS POWER FACTOR (PF)? Power Factor is the ratio between the energy drawings (KVA) and the effective energy utilized (KW) i.e., PF=KW/KVA   WHY POWER FACTOR MUST BE MAINTAINED? By maintaining a better PF we can reduce the energy drawn (KVA), thus reducing the current passing through the electrical circuits to the maximum extent possible (even up to 50%) thereby reducing the down time, reduction in heat losses in turn increases the life of the equipment. Otherwise, for every reduction of 0.01 from 0.85 up to 0.75 PENALTY is 1% and below 0.75 it is 1.5% from 0.85 of the Current Consumption Charges (KWh) on your Electric Bill. INCENTIVE is also given by the Electricity Board when the PF is maintained above 0.90 @ 0.5 % for every increment of 0.01 on your Electric Bill.   HOW TO MAINTAIN THE POWER FACTOR? According to the load pattern, proper Capacity of Capacitors to be connected. The value of the capacitors to be connected will vary with respect to the load and its existing PF. There are two ways to maintain PF 1. Fixing the capacitors permanently at the load end or at the mains, generally which is recommended for the fixed loads like Pumps, fans etc., and it is not possible for the loads which have variations in the load and PF. 2. The Power Factor can be maintained by installing ELITE AUTOMATIC POWER FACTOR CONTROL PANEL.   ELITE Controller displays the following parameters. Voltage: R, Y & B Phases, Amps: R, Y & B Phases Present KILOWATT (utilizing current) Present RKVA demand (Required capacitors to attain UNITY power factor) Present KVA (drawing current),Present Power Factor (PF normally 0.99lag) No. of capacitor Banks ON or OFF,Provision to indicate Imbalance load Provision to indicate the change in phase sequence AEE’s PF Controller has built-in protections for High voltage cut-off AEE’s PF Controller has built-in protections for Low voltage cut-off The values and stages can be made as per customer’s request Higher Capacity Panels up to 450 KVAR can be supplied against Order IMPORTANT BENEFITS FOR INSTALLING FOR ELITE AUTOMATIC POWER FACTOR CONTROL PANEL Fully Automatic, no Manual Interventions is required. HEAVY Power Factor PENALTIES on the consumptions are ELIMINATED. INCENTIVES are received on every payment made. Optimize the capacity by reducing the maximum demand KVA. Avoids excess demand charges. Considerable REDUCTION in consumptions (KWH) charges. Improvement in line voltages. Excess Drawing of power is absolutely ELIMINATED. Reduced line current losses and cable overheat. Enhanced life of electrical circuits. Avoids overloading of Distribution Transformers. Additional service connections in existing generation of power by reducing energy losses. Reduced line losses benefits SEB’s and Nation. Avail DEPRECIATION as per Income Tax Depreciation Schedule. OUR PANEL COMPRISES OF VAR SENSING CONTROLLER with LCD display to show all the line parameters. 3 Nos of C.V.T’s (Current Voltage Transducers) of ratio 1:400 CAPACITORS of SIEMENS – EPCOS make – MPP type – 440 V / 50 HZ – Delta connected CONTACTORS to switch in & switch out the capacitors of ABB / SCHNEIDER/BCH make fixed individually to all the stage capacitors at 440 V / 230 V AC coil. MCB/ 3 Pole as Incomer of ABB / SCHNEIDER make. Provision of INDUCTOR COIL individually to all the capacitors to cater the in- rush currents. To Maintain the OPTIMUM POWER FACTOR load balancing to be Carried out in your Premises compulsorily. After providing our APFC panel the readings of KWH, KVAH, Pr.PF, Avg.PF from the EB meter has to be given to our office once in a week to monitor the improvement of PF.