Instrumentation Equipment Dealers in Chennai

• Material: Rubber
• Weight: 1-5kg
• Color: Black
• Surface Finishing: Polished
• Type: Automotive Parts
• Usage: Industrial

With an experience of more than 25 years, we are regarded as one of the premium Manufacturers, Exporters and Suppliers of Automotive Rubber Components from Tamil Nadu, India. The Rubber Components we offer are highly appreciated for their durability, smooth finish and requirement of less maintenance. Buyers from all over the world can acquire Automotive Rubber Components from us at market leading rates.

• Material: Aluminium LM6
• Type Of Protection: Flame Proof - Exd
• Area Classification: Zone 1 & 2
• Gas Groups: Group I, II A, II B
• IP Protection: IP 65 as per IS-12063/1987 (IEC 60529/1989)
• Gasket: Neoprene
• Hardware: Stainless Steel
• Finish: Epoxy Powder Coated Light Grey (Shade-631 Of Is:5)

• Brand Name: TSI
• Material: Plastic
• Current Type: Single Phase
• Application: Air Flow Indication
• Certification: ISO 9001:2008 Certified
• Feature: Superior Finish, Sturdy Construction, Proper Working, Easy To Install
• Voltage: 5VDC
• Warranty: 1 Year
• Country of Origin: USA

TSI's Flow Meter design team can develop the precise mechanical configuration, performance characteristics, and electronic interface you need to optimize your design. The exceptional performance of these embedded flow sensors can enhance your product's performance and improve the time to market on new product development.   Specifications Calibration: air Flow range: 0 to 300 standard L/min Accuracy: ±2.5% of reading ±0.1 standard L/min @ 21 °C   (Consult TSI for complete product specifications. Specifications are subject to change without notice.) Temperature range: 0 to 65°C  Pressure drop: 18 cm H2O at 300 L/min  Response time: 5 msec (63% to full-scale flow) Output signals flow: 0 to 4 VDC non-linear, 1 channel  Output signal temperature: 0 to 4.5 VDC non-linear Input voltage: 5 VDC ±5%, regulated  Power consumption: 0.65 watts at full-scale flow Mating connector: amp 1-640456-0  Eeprom interface: SPI communication Meets RoHS Directive 2011/65/EU   Features and benefits Fully calibrated and ready to install Mass flow measurements Fast response Accuracy as a percent of reading Low pressure drop

• Country of Origin: India
• Application: Industrial Use
• Weight: 100-150g
• Feature: Auto Controller, Dipped In Epoxy Resin, Durable
• Frequency: 50Hz
• Temperature: -25 +85deg C

SCC503 is a 2-wire differential pressure transmitter housed in an IP65 enclosure made of ABS plastic. It may be wall, surface or duct-mounted. By deploying pressure tubes into two different areas, SCC503 measures, displays and transmits the difference in pressure between those areas. This transmitter is widely used in pharmaceutical facilities that must maintain a pressure gradient to prevent cross-contamination of the various materials within its rooms. SCC503 is easily configured via a dipswitch or PC to indicate differential pressure in a wide range of units - Pa (pascals), mmWC, mbar, inWG, inHg, PSI, mmHg. SCC503’s microcontroller technology linearizes the input which makes control more effective. If programmed by a computer, you will require a PC configurator, PCC82 by Radix. A push button on the unit allows easy auto-zero adjustment.

We make available a wide variety of Electrical Cables, which includes Instrumentation Cables, High Voltage Cables and Fibre Optic Cables.  The company is a reliable Supplier and Exporter of Electrical Cables from Saudi Arabia. The Electrical Cables offered by us are sourced from reputed vendors of the market. Owing to our brilliant logistics network, we are capable of delivering bulk orders of the Electrical Cables.

• Material: Mild Steel
• Application: Electric Fitting
• Country of Origin: India
• Phase: Single Phase
• Shape: Rectangle
• Rated Voltage: 415 V
• Automation Grade: Automatic
• Finish: Galvanized

• Brand Name: PS POWER
• Capacity: 100 KVAr
• Input Voltage: 440 V
• Model Number: 001
• Place of Origin: Chennai

We are the leading manufactures of Automatic Power Factor Correction Panles _ APFC panels in Chennai, Tamilnadu & Andra Pradesh. An automatic power factor correction unit is used to improve power factor. A power factor correction unit usually consists of a number of capacitors that are switched by means of contactors. These contactors are controlled by a regulator that measures power factor in an electrical network. To be able to measure power factor, the regulator uses a current transformer to measure the current in one phase. Depending on the load and power factor of the network, the power factor controller will switch the necessary blocks of capacitors in steps to make sure the power factor stays above a selected value (usually demanded by the energy supplier), automatic power factor capacitor in chennai

• Color: Black
• Shape: Square
• Use: Automobile
• Feature: Durable
• Material: Metal
• Finishing: Polished

For making sure about the safety of the products during handling, transporting and warehousing, we make use of quality packaging material. And, this task is accomplished by our deft professionals. Our team members assist us in settling down the payment procedures and they help us in making transactions that are completely secured and are executed as per the client's convenience.

• Voltage: 220 V
• Warranty: 1 Year

Features : 4 Digit seven segment LED display Wide range 10 – 9999 RPM / RPS / RPH 3 to 30V DC Input Pulse from any type Sensor Opto isolated Re-transmission analog output 4-20mA or 0-10V DC Optional RS 485 (2 wire) MODBUS RTU Protocol communication Allows Maximum 3.5 kHz Input Pulse Speed 12 V DC Sensor Supply Universal Supply Voltage 90 to 270V AC / DC RPM / Rate / Frequency Front Key Scalable Scale factor & Exponential are Pre-settable 2 Relay Output with Front Key Set table Hi & Lo Set points Power ON Delay & Hysteresis for Relay Output is Provided Speed Monitoring Speed Control High & Low Speed Alarm Length Measurement & Control Line Frequency Monitor & Alarm All types of Speed / Rate / Frequency Monitoring & Control Applications Specification : Model: RP 491 Display: 4 Digit 0.5” 7 segment Red LED Accuracy: ± 0.05 % (± 1 count) Range: 10 - 9999 RPM / RPS / RPH Resolution: 0.001, 0.01, 0.1, 1 RPM / RPS / RPH (selectable) Input: 3 - 30V DC from Proximity Sensor, Photoelectric Non Contact Sensor, Encoder, Potential Free Contacts, Limit Switch etc.,. Input speed: 3.5 kHz (Max.) Scale factor: 0.001 to 9.999 Exponential: 10n = -3, -2, -1, 0, 1, 2 Relay output: 2 NO , 2 NC 5A rated Relays(power ON Delay & Hysteresis provided) Re-transmission (optional): Opto isolated analog output 4-20mA or 0-10V DC Communication (optional): RS 485 (2 wire) MODBUS RTU Protocol Sensor supply: 12V DC (±10%) 50mA Working temperature: 0 – 50°C Power Supply: 90 to 270V AC / DC 50Hz Dimension: 96 x 96 x 65 mm Weight: 350 grams (Approx.)

• Application: Industrial
• Automatic Grade: Semi Automatic
• Power Source: Solar
• Efficiency: 80%
• Warranty: 1Year

They are useful for residential, commercial, institutions, etc., using energy efficient hybrid solar power conditioning unit with MPPT charge controller, having high surge capacity, low distortion, smart battery management system, enjoying energy independence and good financial returns on every sunrise. It is pollution free, green harvest and can be coupled with wind mill that produces power day and night. We also deal with energy saving LED lights.

• Phase: Single Phase
• Working Environment Acidic or chemical environment: Electronics protected with Epoxy potting
• Frequency: 50hz/60hz
• Pulse Duration: 100 to 300 ms
• Pulse Frequency: 1 - 120 pulses per minute
• Warranty: 1 Year

This Controller is  suitable for Diaphragm pumps that operate with a 220V DC solenoid.   Our controller can give 220V DC pulses at defined pulse rates.  

• Warranty: 1Year
• Power Source: Solar
• Automatic Grade: Automatic
• Condition: New
• Solar power: 1Kw
• Application: Toproof
• Certification: CE Certified
• Type: Solar Power Panel,The Nominal Operating Cell Temperature (NOCT) is the temperature reached by a solar panel under four standard environmental conditions:
• Material: Sunlight hitting the solar panel = 800 watts/sq meter. Wind velocity = 1 m/s. Air temperature = 20°C (68°F) Panel angle = 45° from horizon.

ROOF TOP SOLAR PANELS ONGRID, OFFGRID, HYBRID, SOLAR FARMS. Solar panels, which convert sunlight into electricity, are a cornerstone of solar power systems

• Material: Metal & Plastic
• Power Source: Solar
• Size: Standard
• Certification: CE Certified
• Voltage: 220 V
• Warranty: 1Year
• Country of Origin: India

• Country of Origin: India
• Material: Metal
• Certification: ISI Certified, ISO 9001:2008
• Feature: Dust Proof, Excellent Reliabiale, Light Weight, Maintenance Free, Tamper Free, Weatherproof
• Frequency: 50Hz, 60Hz
• Brand Name: Atlas

Features Compact design Easy usages Less maintenance Impeccable performance High accuracy

• Material: Copper
• Surface Finishing: Polished
• Color: Copper
• Application: Industrial
• Size: 0-15mm
• Feature: Accuracy Durable, Corrosion Resistance, Extra Stronger, Hardend & Temper, High Quality, High Tensile
• Thickness: 0-5mm
• Size: All Sizes
• Grade: All

• Material: Iron, Steel
• Color: White
• Application: Industrial
• Type: Ultrasonic
• Country of Origin: India
• Brand Name: Teleflo
• Certification: ISI Certified

With the unwavering support of our assiduous teammates, our organization is able to present a remarkable range of Ultrasonic Level Transmitter. These offered valves are precisely designed using qualitative raw material along with latest machinery and tools.

• Brand Name: EMINENT
• Certification: IEC
• Type of Solar Panel: Mono Crystalline
• Installation Method: Manual
• Short Circuit Current: 0.80 - 2.80 A
• Performance Warranty: 2 - 5 Years*
• Open Circuit Voltage: 10 V
• Maximum Power Voltage: 8.2 V
• Maximum Power Current: 0.40 A
• Voltage at NOCT: 12 V
• MNRE Approved: Yes