Insulating Gaskets Dealers in Kandanchavadi, Chennai

Metal Jacketed Gaskets consist of a metallic outer shell with either metallic or non-metallic compressed fiber filler. The filler material gives the gasket resilience, while the metal jacket protects the filler and resists pressures, temperatures, and corrosion. Special used in sealing spots of heat exchanger, pressure vessel etc. This gaskets highly resistance against blow-out suitable for high assembly stress.

• Type: Jacketed Gaskets
• Material: Metal, Mild Steel, Stainless Steel
• Shape: Ring Gasket, Round
• Color: Silver
• Packaging Type: Box, Packet
• Packaging Type: Durable, Low Cost
• Application: Automobile Industry, Commercial, Industrial
• Feature: Corrosion Resistance, Dimensional Accuracy, High Quality

We are the main supplier of this product.

Flange Isolation/Insulation Kits; include insulating sleeves that electrically separate the bolts and the insulating washers providing electrical insulation for each bolt and nut. DELTAONE flange isolation kits are designed to provide complete electrical insulation of a flange assembly.   DELTAONE flange isolation kits are available for all flange sizes, types, pressures, and materials including, Mylar, G-10, Nomex, and Phenolic. DELTAONE sealing gaskets are available in plain phenolic, rubber faced phenolic, G-3 high-temp phenolic glass, G-7 silicone glass, G-10 epoxy glass, G-11 epoxy glass, Nitrile, EPDM, Teflon, Viton, and Special Nitrile.   Flange Isolation Kit with Type "E" Gaskets have the same outside diameter as the flanges. Type "E" Gaskets are manufactured with precision-located bolt holes. They are easy to center and will prevent foreign material from becoming lodged between the flange faces and shorting out the flange insulation. Type "E" gaskets are available in a wide variety of materials; G-10 epoxy glass, G-11 epoxy glass, Nitrile, EPDM, Teflon, Viton, and Special Nitrile. Flange Isolation Kits with Type "F" Gaskets are made to fit within the bolt hole circle. The outside diameter of the gasket is slightly larger than the inside diameter of the bolt hole circle. They are available in a wide variety of materials; G-10 epoxy glass, G-11 epoxy glass, Nitrile, EPDM, Teflon, Viton, and Special Nitrile. Type "D" Gaskets are made specifically to fit into the ring groove of RTJ flanges. They are available in reinforced phenolic and other materials..   DELTAONE sealing gaskets far exceed the sealing capabilities of flat gaskets. DELTAONE sealing gaskets consist of a sealing element positioned within a groove on opposite sides of a retainer. Elastic memory characteristics of the confined sealing elements result in near zero 'm' and 'y' factors making it possible and effect to produce a positive seal without significant bolt loads that are required to crush flat gaskets into a configuration capable of producing a marginal seal, at best.   Y = Compressive load necessary to effect a seal. M = Extra load (above Y factor) necessary to hold fluid pressure over the operational pressure range of the system. Near zero m and y factor sealing gaskets can be used to effectively seal mating surfaces made from glass, plastics, ceramics and other materials that would tend to shatter when over compressed. When used with flanged piping systems, lower bolt torques and lighter weight, lower pressure rated flanges may be used, resulting in additional material and installation savings. Lower bolt torques required to effect a seal Reduction in installation time and the need for impact wrenches or cheater bars Eliminates the need for retightening due to flat gasket cold flow Reduces the need for high tensile strength bolts or studs Permits the use of lighter weight or lower ANSI rated flanges Assures a positive seal first time, every time while eliminating costly delays to tighten leaking flanges during initial pressurization Pressure energized, controlled confinement of DELTAONE sealing elements Sealing elements maintain contact with mating surfaces even though the surfaces may tend to warp or separate due to thermal shock, pressure fluctuations or other external forces Internal fluid pressure forces the seal elements against the mating surfaces increasing the effectiveness of the seals.

Double Jacketed Gaskets, Spiral wound gaskets, Rubber Gaskets, solid gaskets

Metal jacketed gaskets specially designed as Heat Exchanger Gaskets are widely used on smooth flange applications. They are ideal for Heat Exchangers, Auto claves, columns, flue stacks, boilers, gas mains, valve bonnets, pumps and similar services. Camprofile gaskets used as Heat Exchanger Gaskets consists of a metal core with concentric grooves on either side with sealing materials. The Sealing layers (depending on the service duty) can be Graphite, PTFE (Teflon), CAF or Metal (e.g. Aluminium or Silver). Camprofiles can be used without sealing layers to provide an excellent seal but there is a risk of flange surface damage

• Type: Insulating Gaskets
• Material: Iron, Metal, Rubber
• Color: Black, Grey, Shiny-silver, Silver
• Pattern: Plain
• Finishing: Non Polished, Polished
• Feature: Durable, Easy To Install, High Quality, Perfect Shape, Robust Construction

Double Jacketed Gaskets, CAF Gaskets, gland packing gaskets, rtj gaskets

insulating gaskets, Non Metallic Gaskets, PTFE eveloped gaskets

Jacketed Gasket, industrial gasket, camprofile gasket, soft cut gasket

Metal Jacketed Gaskets, power cylinder, Ptfe Envelope Gasket