Laboratory Apparatus Dealers in Injambakkam, Chennai

Features   Vactech Surgical suction unit meets the requirements of all surgical fields of applications. The suction unit runs on Oil Immersed Rotary Vane vacuum pump and thermally protected vacuum pump motor. The unit having stainless steel cabinet mounted on anti static caster wheels. The suction unit provided with two Autoclavable / Unbreakable collection jars made from high quality polycarbonate material. The collection jars have self-sealing Rubber lids. Vacuum can be adjusted with the help of vacuum regulator and vacuum gauge. Safety float prevents entry of suction fluid in the pump in case of overfilling. A special Bacteria filter ensures zero contamination and thus prevents infection.

SALT SPRAY CORROSION CABINET-200 LITRE[Indigenous] Description:Cat No. 1502E ECONOMY ASTM MODEL SALT SPRAY CORROSION TEST CABINET, THERMOSTATIC, designed in compliance with ASTM: B117 specifications, having working temperature of 35 Deg C +/- 2 Deg C.PVC Chamber inner size : 780 L X 580 W X 450 mm depth (Capacity: 200 litre). Panel holding capacity : 3 racks x 20 panels (60 panels) with 2 Nos sample hanging Rods,Heater Load 1000 watt + 500 watt

The Dean and Stark Apparatus or Dean and Stark receiver or distilling trap is a piece of laboratory glassware used in synthetic chemistry to collect water (or occasionally other liquid) from a reactor. It is used in combination with a reflux condenser and a batch reactor for continuous removal of the water that is produced during a chemical reaction performed at reflux temperature.

Specification Working Temperature  up to RT to 1200°C /1400°C Tailor made sizes as per the customer requirement Imported heating element 1°C accuracy at dwell temp Rapid heating rate(1 to 20°C/min) programmable Suitable for body, glaze, stain, frit  and raw material testing. indigenized problem free design Indigenous VBCC Make phase control thyrister controller Nippon PID programmable digital temperature indicator cum controller

• Thickness: 10-15mm
• Grade: BS, DIN
• Feature: Extra Stronger, Hardend & Temper, High Quality
• Surface Finishing: Polished
• Country of Origin: India
• Brand Name: DYNAFLEX
• Pressure: 3000 PSI
• Temperature: 400 Deg C

We are offering mica-gasket-glass assembly for yarway color-port water level gage. Repair kit part no. 7000013156 (replaces kit part no. 923321) pressure rating: 1551 to 3000 p.s.i. For use with color-port figure numbers 4591 thru 4595 glasses are accurately molded and tempered to yarway specifications. The assembly of glass, mica and gasket is registered precisely in the gasket groove in the body. At boiler pressures above 300 psig, high temperature water will corrode unprotected gage glass. A thin sheet of high quality ruby mica on the inner surface of each port protects the gage glass from corrosive attack of steam, water and alkalis; however, this protection is not permanent. Continual exposure to high temperature, high pressure water will also corrode the mica shield. The rate at which this corrosion occurs is significantly less than that of glass, and is dependent upon a number of factors. Generally, the higher the operating temperature, the higher the rate of attack. Warning: replace immediately when glass appears white or opaque. Failure to promptly replace the mica-gasket-glass assembly that appears white or opaque can result in catastrophic failure of the glass with violent discharge of hazardous high velocity steam. The discharge of high velocity steam can result in personal injury and property damage may occur. Yarway recommends each customer establish a preventative maintenance schedule which insures the mica-gasket-glass assembly is replaced previous to the dissolution of the mica shield. In-service gages that have glass which appears white or is opaque, should be isolated immediately and the mica-gasket-glass assembly should be replaced before returning to service. Should any question develop on the condition of the gage glass, the procedure given under the section on preparation for washdown, auxiliary service or gage inspection of the installation, operation and maintenance manual of colour-port water level gages should be used to evaluate port glass condition.

• Voltage: 230 V
• Country of Origin: Made in India
• Length of the Fin: 150 mm
• Power Source: AC
• Material of Fin: Brass

Salt Spray Test Apparatus, Laboratory Equipment, Vacuum Oven

device connectivity software, holter ecg, medical computer systems

Ecg, pathology lab services, Doppler, stress test service

Ultrasonic Body Slimming Apparatus, Co2 Fractional Laser Machine

Medical Equipments, cordiological equipments

Medical Equipments, Shortwave Diathermy Equipment, Ultrasonic Therapy Unit

Bp Apparatus, HMS Overhead Pulley, Stainless Steel Trolley

Multi Parameter Monitor, Pulse Oximeter, X Ray Machine, Multipara Monitor

Medical Equipments, ICU Ventilators, Ultrasound, Pulse Oximeter

Melting Point Apparatus, Sensor & Temperature Controllers

Aniline Point Apparatus, Worm and Gear Steering Gear Box

Melting & Boiling Point Apparatus, microwave digestion system

salt spray apparatus, Autoclaves, Furnaces, Humidity Chambers