Laboratory Cabinets Dealers in Chennai

Optimum quality of Seed Germinator is offered by us. Seed Germinator is suitable for conducting experiments of variety of seeds under different temperatures and humidity.

• Material: Aluminium Alloy
• Shape: Rectangular
• Phase: Single Phase
• Temperature Range: 40-50 Degree C
• Automation Type: Semi-Automatic
• Operating Voltage: 220V
• Frequency: 50/60 Hz
• Exhaust Cfm: 1220cfm

• Voltage: 220V
• Automation Grade: Automatic
• Temperature: 20 Degree C
• Gas pressure: 1ppm
• Box Dimension: 1500 x 800 x 930mm
• Leakage Rate: 0.05vol%/h
• Numbers of Gloves: 2

• Colour: Blue

Germination chamber manufactured and exported by meditech provides optimum environment for the seeds to germinate. The germination chamber, improve uniformity, decreases the lead time and increase the numbers of seed to germinate. Germination chambers and rooms are used to provide a superior environment conditions for the seedlings off to a good start. Important factors for germination chamber: the most important factor for germination are temperature, light, humidity and oxygen. Humidity: seeds inside a packet has a humidity content of 4-12%. For the seed to germinate, the humidity needs to be increased to 50%. Meditech germination chamber provides superior humidity accuracy in contact with the seeds and proper drainage of water inside the chamber. temperature: meditech germination chamber are designed for a wide range of temperature for different species of seed. The above factor is been tested by usda and various universities across the world. Some species like marigolds germinate between 10°c to 30°c. Other species like freesia germinate between 10°c to 20°c. Meditech chambers are designed and can be adjusted from temperature range between 4° c to 50° c. Light: adequate light is important for uniform germination of seeds. Meditech germination chamber has a wide spectrum of light. Few also growers treat seeds with light before they are sold. Light is important to prevent stretching once the seed starts germinating. T-8 and t-5 fluorescent lamps are widely used in germination chamber. Cool white and warm white gives best result. The light canopy is fixed above the trays so that light falls directly on the seeds. meditech germination chamber is widely used by seed growing companies and growers for optimum environment for different species. The shelves are usually placed 12″-18″ apart with fluorescent light. The seeds are left underneath the shelves for 2 weeks with exact temperature and humidity settings before moving to the greenhouse.

We supply Chemical Storage Cabinet, which is acclaimed for its big size and multiple compartments, which are spacious and finely finished. This Chemical Storage Cabinet is available in different colors and sizes, which can be customized by the buyer.

Fully Operational Insert Atmosphere Workstation PLC controlled with color touch screen Attainable purity of>1ppm H2O Stainless Steel encapsulated blower with variable speed Circulation capacity of 50cfm (50HZ) or Higher International Standard power supply Integrated high vacuum feed throughs High Precision Moisture and Oxygen Analyser

Specification VBCC Glove boxes are manufactured with variety of Sizes and Designs using the highest quality components. The Exterior and Interior finish will be Brushed, Anti corrosive coating and scratch resistant.They are designed for a modular platform that allows customers to expand existing Glove boxes to meet increasing workflow requirements. VBCC Glove Box systems consist of Two Gloves, Three Gloves, Four Gloves and Customer Requirement.VBCC Glove Box Systems are used under Inert Atmosphere as well as Controlled gas Atmosphere

Technico Glove box main working chamber will be made of stainless steel 304 with Epoxy powder coating finish. The chamber will be provided with a Antee / Mini- pass chamber to enable transfer of necessary samples into the main chamber. The Glove box chamber will have a front window for clear observation of the inner chamber. If Transparent Acrylic windows is required on both sides we can also provide this. The gloves will made of Black Neoprene Rubber of 30 Mil. Size : 6 cff x 32 “ L Or 8 “ cuff x 32 ‘ L The chamber will be illuminated by tube lights provided in the front top side for a clear bright view of the inner chamber. The main chamber will be provided with a vacuum port, Gas purging port and gas inlet part with suitable valve arrangements. The vacuum port will be used to vacuumed the chamber to remove the air/ atmosphere / Moisture vapours from the chamber. The chamber under – ve pressure can be now purged with any insert Gas like nitrogen etc. to have a working inert atmosphere inside. Both the main chamber and Antee chamber can be purged with inert gas like Nitrogeen etc. for having a inert working atmosphere inside the glove box chamber. The gas from a cylinder is connected to the gas inlet below the moisture silica gel filter. This will neutralize the – ve pressure and make the chamber slightly above atmosphere pressure. A Dial Gauge is provided to indicate the vacuum and pressure . The same process can be performed for the Antee Chamber. Note : The Glove box is not meant to be operated under High vacuum or High pressure. A Suitable vacuum pump of required capacity will be provided with in built and fittings with vacuum Hose connection. A timer will be provided which will cut- off the vacuum system of safety level.   OPTIONAL:  Low Wattage heater with digital controller.   RH humidity sensor and indicator.   Automatic pressure control and purging   Shelf   Additional side door for equipment transfer.   Chamber size (L ) x ( W) x (H) mm No of Gloves 800 x 800 x 800 1 pair 1000 x 800 x 900 1 pair 1200 x 900 x 1000 1 pair or 3 gloves 1500 x 900 x 1000 2 pair  

Most economically designed Glove box to work for controlled atmosphere. MS material construction with 6” Gloves and1 feed through door on the left hand side  Specification: Dimensions:700 x700 x 700 mm(LxBxH) Feed through door:300mm dia Inclined glass panel for front view Front LED light,Gas inlet, Vacuum outlet and Electric point inside

• Type: Vertical Laminar Airflow Cabinet
• Material: Mild Steel, Stainless Steel
• Application: In Laboratory
• Voltage: 110V, 220V
• Condition: Good, New
• Power Source: Electric
• Feature: Durable, Easy To Install, Fine Finish, Portable, Strong Construction
• Warranty: 1year, 2years
• Illumination: 750 to 800 lumen
• Velocity: 90FPM + 20%

• Application: Scientific Application
• Material: Stainless Steel
• Shape: Rectangular
• Country of Origin: Made in India
• Automation Type: Semi-Automatic
• Material Grade: SS304
• Design Pressure: 3.5 kg/cm2
• Integrated Blower: 6 CFM
• No Of Pin: 2

The Chemical Storage Cabinets, delivered by us, are reckoned for their high resistance to abrasion and chemicals, as they are manufactured using high-quality raw materials.  These Chemical Storage Cabinets are available in different sizes that can be customized by the buyer.

• Power: 5W
• Voltage: 380 V

• Material: Aluminium Alloy
• Height: 6-7 Feet
• Door Type: Hinged
• Usage/Application: Chemical Storage
• Shape: Rectangular

SINGLE CHAMBER APPLICATIONS User oriented design of shelves makes you adjust each space of shelves without difficulty. Forced air circulation at triple walled back by durable coaxial blower, maintains optimum temperature uniformity and homogeneity. High grade PUF Insulation between outer and inner chamber for minimal thermal losses. Caster wheel mounted for easy portability. Front double walled door is provided with lock and key arrangement. Door operated illumination lamp is fitted inside the chamber for easy visibility. Finned tube evaporator facilitates uniform and faster cooling effects. Safety Thermostate to prevent overheating Germinators are useful for seed testing, biological studies, forestry research works etc. With a solid see thru double walled door and a full view inner plexi-glass door enables inspection and monitoring of inner chamber specimens without distributing the process temperature.

 “MIGHTY INSTRUMENTS” Seed Germinator is designed for conducting various experiments on variety of seeds under different parameters of temperature, humidity etc. Atmospheric environment is simulated within the laboratory to perform different experiments without going into the field.

laboratory cabinets, Clean Room Wall Panel, Laminar Flow Cabinet

laboratory cabinet, Wall Work Table, Wall Mounted Storage Cabinets

• Country of Origin: India
• Type: Vaccum Cooker
• Material: Aluminium, Mild Steel, Stainless Steel
• Application: Industrial Use
• Weight: 300-500 Kg, 500-700 Kg
• Color: Grey-black, Metallic, Shiny-silver, Silver
• Voltage: 220V, 230V, 240V, 280V
• Condition: New, Old
• Capacity: 25-50 Kg, 50-75 Kg, 75-100 Kg
• Finishing: Coated, Polished
• Power Source: Electric

glove boxes, Pharmaceutical Equipments, Isolators, Bio Safety Cabinets

• Brand Name: GE and Philips Medical

We are offering medical accessories. Cables,spo2 sensors,ecg, tmt papers, electrodes,monitor accessories, ventilator accessories, flow sensors, o2 cells,disposables etc. For all medical equipments

laboratory cabinets, laboratory tables, molecular biology reagents

Anti Ageing Treatment Chennai, Laser Hair Reduction Treatments

medical consumables

Vacuum Furnace, Furnaces, Deep Freezer, Incinerator, Scientific Instruments

inoculation hood, industrial tray dryer, Incubator Shaker, Incinerator

Laboratory Cooling Cabinets, Freezing point apparatus, Water Cooling System

laboratory cabinets, Clean Room Door, Emergency Exit Doors