Laboratory Furniture Dealers in Thirumudivakkam, Chennai

Technico Glove box main working chamber will be made of stainless steel 304 with Epoxy powder coating finish. The chamber will be provided with a Antee / Mini- pass chamber to enable transfer of necessary samples into the main chamber. The Glove box chamber will have a front window for clear observation of the inner chamber. If Transparent Acrylic windows is required on both sides we can also provide this. The gloves will made of Black Neoprene Rubber of 30 Mil. Size : 6 cff x 32 “ L Or 8 “ cuff x 32 ‘ L The chamber will be illuminated by tube lights provided in the front top side for a clear bright view of the inner chamber. The main chamber will be provided with a vacuum port, Gas purging port and gas inlet part with suitable valve arrangements. The vacuum port will be used to vacuumed the chamber to remove the air/ atmosphere / Moisture vapours from the chamber. The chamber under – ve pressure can be now purged with any insert Gas like nitrogen etc. to have a working inert atmosphere inside. Both the main chamber and Antee chamber can be purged with inert gas like Nitrogeen etc. for having a inert working atmosphere inside the glove box chamber. The gas from a cylinder is connected to the gas inlet below the moisture silica gel filter. This will neutralize the – ve pressure and make the chamber slightly above atmosphere pressure. A Dial Gauge is provided to indicate the vacuum and pressure . The same process can be performed for the Antee Chamber. Note : The Glove box is not meant to be operated under High vacuum or High pressure. A Suitable vacuum pump of required capacity will be provided with in built and fittings with vacuum Hose connection. A timer will be provided which will cut- off the vacuum system of safety level.   OPTIONAL:  Low Wattage heater with digital controller.   RH humidity sensor and indicator.   Automatic pressure control and purging   Shelf   Additional side door for equipment transfer.   Chamber size (L ) x ( W) x (H) mm No of Gloves 800 x 800 x 800 1 pair 1000 x 800 x 900 1 pair 1200 x 900 x 1000 1 pair or 3 gloves 1500 x 900 x 1000 2 pair  

Anti vibration table has laboratory application where instrument usage and accuracy of their reading are effected by vibration e.g. Galvanometer, balances etc. The outer table is positioned independently of the inner table. The inner table is a heavily weighted pre-fabricated. System which is mounted on specially rubber mounts to dampen the minutest vibration. A small drawer is provided for the convenience of the user for storing weights, accessories etc.

Lab Work Bench, Clean Room Door, Garment Cubicle, Emergency Exit Doors

Laboratory Desk, Joule Calorimeter, Ohms Law Apparatus, Hooke Law Apparatus