Lathe Machine Spare Dealers in Chennai

• Standard sizes available: 135mm, 165mm, 200mm, 250mm, 315mm, 400mm and 500mm

Power Operated Three Jaw Chuck with Through Bore (PHNC) : GMT Power Operated Hollow High Speed Chucks are designed to rotate at high speeds on CNC lathes. The compact construction of the PHNC Power Chucks offer further advantage of less weight and low inertia which have positive influence on the dynamic effect of CNC machine spindle. These power chucks have a large through bore and are therefore suitable for bar work. The base jaws and top jaws weight are reduced in these chucks. This not only reduces the mass but also lowers the centre of gravity, which make the centrifugal losses low.Power chucks on CNC machines need to deliver high initial gripping force. GMT takes care of this in the design by making the power chuck operate with a large drawbar pull. Consequently, the wedge is designed to have large contact area with the base jaws. The weight of the body, base jaws and hard jaws are less, without the other essential criteria being sacrificed. The chuck body is recessed to remove a large extent of material to reduce the weight. (from sizes 250 mm to 500 mm). The chuck body is forged steel. The guideways are hardened and ground.The wedge, made of nickel chrome steel, is case hardened and ground on all the working surfaces. The base jaws also made of nickel chrome steel, are case hardened and ground to match both the wedge and the body guideways. The base jaws are guided in the deep, wide, hardened slots in the body, which provide the ample bearing area necessary to withstand the forces resulting from high gripping action.

Productivity #Accuracy #Reliability:   Reinforced Electro permanent systems with extremely High magnetic power. Absolute safety against Power or Cable Fault. Cold operating ensures Ultra Precision machining. An enormous Reduction in clamping and setup times. Customized solutions to suit your requirement.     #Simpler #Safer #Super Electro Permanent Magnetic [EPM] Chuck Combines the clamping force of high quality Permanent Magnets with the advantage of switching facilities an Electrical Devices is thereby providing in piratical applications all the prerequisites for precision, safety and ease of operation. A totally original and unique Electro Permanent system is controlled electronically and the clamping zone comprises of a series pf alternate poles. An electric impulse of very high magnitude but of a very short as the chuck is switched ON with the job completing the magnetic circuit the magnets work at BH. Rem & hence is able to provide a magnetic energy perfectly suitable for heavy cuts and thrusts during Grinding, Planning and Milling operations. With these properties we can provide you performance results which has so far been unobtainable from conventional permanent magnetic chucks and hardly obtained in best electromagnetic chucks available.   Dimensional Stability The solid construction of the EPM chuck eliminates mechanical distortion and unlike electromagnetic chucks there is in heat generation hence the chuck when once attached to the machine bed will be as geometrically stable as the machine itself providing working surface with uniform holding power required of precision machining. The chuck is entirely static and hence it is not subject to mechanical wear.   Total Security The Electronic Control unit is specially designed for Easy and Safe operation of Electro Permanent Magnetic Chucks. Power circuit is controlled by Thrusters and is operated by Remote Control. The switching On/Off of the chuck is done by means of Illuminated push-buttons. The Power consumption is considerably reduced saving almost 98% of precious energy, as only a current pulse for few seconds is required to switch the chuck on and off. Hence the running and maintains cost of the EPM chucks are virtually nonexistent. When in operation the chuck is entirely isolated & independent of power supply. This gives total security against POWER FAILURE and eliminates any risk of accidental release of work piece.   Wide Range EPM chucks are available in Grinder series and Milling series in sizes from 200 mm to 1500mm in length and 150 to 400mm in width having longitudinal or transverse poles. Large Magnetic area can be arranged by multiple mounting of chucks which can be operated by a single controller. Special designed to suit yiour particular applications. They are supplied in full working order complete with side plates and power supply cable.   FEATURES   No electricity required to keep the chuck ON. All Metal Top Plate of Brass and Steel lamination provides full active area. Variable power makes it possible to adjust the magnetic force. It drastically reduces the loading, unloading the work pieces. Hold all type and sizes of work pieces. No heat built up, no deformation provides high precession accuracy.     APPLICATION   For grinding application of all sizes of jobs. These chucks are suitable for horizontal spindle surface grinding machines as the main cutting thrust is towards the length of the chuck, poles at right angle of the wheel give more gripping of the job.     GENERAL APPLICATION   These chucks are also available in long pole design. Large area can be arranged by multiple mounting of chucks side by side which can be operated by a single controller. Special purpose chucks can also be designed to suit particular applications. Pole pitch of 2mm (1.5+0.5) can be made at extra cost.

• Size: Standard
• Color: Grey
• Application: Industrial
• Certification: CE Certified
• Material: Aluminium, Stainless Steel
• Type: Electromagnetic
• Country of Origin: India

• condition: new
• Minimum Order Quantity: 1 Piece

• Shape: RECTANGULAR
• Country of Origin: Made in India
• Size: 12 X 6 INCH
• Usage/Application: Surface Grinding Machine
• Magnet Grade: N35
• Brand: Royal
• Grade Type: N - 35
• Packaging Type: Wooden

• Features: Rust resistance, Compact size, Quality approved.

• Brand Name: Autogrip
• Model Name/Number: VP-204
• Number Of Jaws: 3
• Weight: 7.1 Kg
• Max Clamping Force: 5 kN
• Max. pressure: 2.1(21) MPa (kgf/cm2)
• Jaw stroke(Dia.) (mm): 6.4

• Application: Auto Industries
• Features: Dimensional accuracy , Corrosion resistance , High tensile strength
• Item Code: SP-DC
• Size: 160, 200, 250, 315 Mm

We are manufacturing straight steel roller and idler for conveyor gallery. Tapper rollermandrill for rotomec printing machine. This mandrill used to change the rubber sleeve quickly.

• Shape: Round
• Coating: Nickel
• Magnet Grade: N38

• Features: High work capacity, Rust free, High quality

• Length: 2-3 Feet
• Diameter: 3-4 Inch
• Material: Galvanized Steel
• Hardness: 28 Hrc

• Shape: Round
• Country of Origin: Made in India
• I Deal In: New Only
• Speed: 1500 Max RPM

• Automation Grade: Automatic
• Max Swing Over Bed: 0-250 mm
• Condition: New
• Lathe Machine Type: Vertical Lathe

�EFI� permanent magnetic chuck is widely used in the machine tool industry. It is Easy to install and to operate and it has the highest holding power .It is suitable for many milling applications and for general tool room grinding. FeaturesPowerful holding on entire chuck surface Solid construction top plate protects permanent magnetic pack from EDM fluidsFine pole divisions - for more uniform magnetic holding of small parts EDM operation does not affect by Magnetic.

For clamping diameters from 160 mm to 1 600 mm True running accuracy ≤ 0,01 mm up to clamping diameter of 500 mm Very high repeating accuracy ≤ 0,005 mm Permissible component tolerance up to IT13 Short clamping fixture length Short clamping length Extended insertion depth Pull-back possible For thin-walled or solid components Hand clamping optional possible Virtually wear-free due to elastic deformation during the clamping process. Thus guarantees very long service life Clamping with intrinsic spring force is also possible Maximum possible rigidity of the entire machine-toolclamping-fixture system due to the short clamping fixture length Suitable especially for turbine stage clamping

We are a reseller of Dog Chuck. We can provide best quality dog chuck in chipseWe are a reseller of Dog Chuck. We can provide best quality dog chuck in chipset prise.t prise.

• Material: Stainless Steel
• Diameter: 110 mm
• Material Grade: SS304
• Surface Treatment: Powder Coated

• Automation Grade: Automatic
• Holding Capacity: 10 to 200 mm
• Model: Rv 165
• Number Of Jaws: 3
• Weight: 18kg
• Material Grade: EN-353/EN-36
• Diameter: 165 cm
• Speed: 6000 rpm