Limit Controller Dealers in Chennai

Universal Temperature Controller YUDIAN AI-518 - Economical,wide application,precise control - High accuracy:0.25% FS ±0.1°C - APID, AMPT, PID, ON-OFF selectable with auto-tuning - Dual 4-digit display of process & set point - LED bar graph selectable for display - Universal inputs:Thermocouple,RTDs, Linear currectvoltage - Wide variety of alarm modes selectable - heatcool dual output supported - RS485232 communication supported with protocol AIBUSMODBUS

• Application: As per Customer Requirement
• Voltage: 12 V DC to 80 V DC
• Brand Name: AMC
• Model Name/Number: AB 25 A100
• Color: Black
• Analog Output: +10 V analog

• Size: Standard
• Type: Generator Spare Parts
• Brand Name: Delcot
• Material: Brass
• Certification: ISO Certified
• Application: Generator Use
• Weight: 1-5kg
• Color: Yellow
• Surface Finishing: Polished
• Warranty: NA
• Country of Origin: India
• OE No.: NA
• Rated Voltage: NA
• Rated Current: NA
• Output Type: NA
• Rated Power: NA

The New Generation KRYKARD Load Managers change the way energy is measured and managed on electrical panels. With increasing non-linear loads, meters with conventional measurement technology offer inaccurate measurements resulting in limited energy management benefits. The New PLM Cube Series offers guaranteed accuracy even on non-linear loads that enable you to take accurate & best possible energy management decisions. The wide spectrum of panel meter models comprehensively meets all the measurement & monitoring needs of industry, thereby providing you with an unbeatable combination of performance & range.

• Type: Maximum Demand Controllers
• Certification: CE Certified
• Auxiliary Supply: 240 VAC
• Country of Origin: India
• Accuracy: Class 0.5 S
• Mounting: Panel Mountable
• Application: LT/HT

MD Controller - To avoiding penalty for exceed Maximum Demand - Reduced operation cost - load Management - Reduce Demand Peaks without affecting operation - Predictive control method to optimise demand control - Built in TOD function

• Country of Origin: India

We are Radiant Heating Technologies, leading manufacturer of controllers.

• Material: Cast Iron, Plastic
• Application: Industrial
• Feature: Accuracy
• Warranty: 1 Year
• Display: Local
• Operating Temperatyre: 10-50D/C
• Pack Type: Box

Data Trace Automation provide Different types of Mitsubishi Motion Controllers in Chennai. We supplies complete range of Mitsubishi Motion Controllers like Mitsubishi Motion Controllers Q Series , Mitsubishi Melsec IQ-F Series Motion Controllers , Mitsubishi Melsec IQ-R Series Dealers , Traders in Chennai with best prices in chennai compare to Mitsubishi Authorised Suppliers, Dealers, in Chennai. The MELSEC iQ-R series Simple Motion module allows you to upgrade your machine with less effort.

• Power: 0.2 kw
• Phase: Single Phase
• Current: 1 A, 2 A, 4 A, 5 A, 6 A, 10 A
• Voltage: 230 Volt
• Control Type: High Limit

HI504 is a PID, PI, proportional or on/off pH/ORP controller with one or two set points. The measurement configuration settings and control of pH and ORP are saved separately and permits users to switch between pH and ORP without losing settings. The pH channel can be calibrated in 2 calibration points. The instrument has a full auto diagnostic procedure. Sensor Check™ is also available for pH and ORP probes. The temperature is continuously monitored using a temperature sensor (Pt100 or Pt1000 type) with automatic temperature compensation of pH. One or two analog controller outputs (0-20 or 4-20 mA) can be configured for pH/ORP recording or controlling (only for models with PID), and relays can be used to control the process or be connected with alarm status. Controller status is visable with LED’s on the front panel and on the LCD display. Fail Safe Alarm System Hanna’s exclusive Fail Safe Alarm System protects against problems caused by power supply failure or signal interruption, which are typical risks in industrial environments. An alarm condition is indicated by a red LED, located directly on the front panel of the controller. Programmable Cleaning Cycles Heavy-duty applications often require almost continuous probe maintenance. Elements such as suspended solids, fat, oils, pigments and microorganisms can quickly deposit and soil the glass bulb of a pH probe, the sensor of an ORP probe or the reference junction. Programmable cleaning cycles allow for scheduled maintanence to keep the probe functioning optimally. Analog Output: Data Logging or PID Dosage Control Models are available with one or two analog outputs. These outputs can be connected to a recorder for the catalogging of process data (pH/mV and temperature), or can be used for controlling dosing systems (pumps or electrovalves) using PID control. Sensor Check™ pH/ORP Sensor Check™ performs self-diagnostic and troubleshooting functions by continuously verifying the electrode status based on impedance movement of the glass and reference measurement. Programmable Hold System The hold function allows the user to stop the regulating action of the controller for programmable time periods. It is possible to activate the hold periods in correspondence to programmed operations, such as plant maintenance and cleaning procedures. Logging Capabilites  The controller logging feature can save up to 6000 samples pH/Check°C or ORP and last 100 error, con guration, calibration and cleaning events. This information is accessible from a PC through RS485 and HI92500 software. 

• Model No: DQ 100 UN
• Sizes Available: 96 x 96 x 110 mm , 72 x 72 x 110 mm
• Inputs: Pt100 (0.1/1°C) / J / K (selectable)
• Control Action: PD,On-Off
• Display: 4 Digits , 0.56″, 7 Segmented Red LED.
• Control O/P: Relay 6 A & 10 A.
• Setting: Through Front Keys
• Zero Correction: Through Front Keys
• Supply: 230VAC.±10%, 50 / 60Hz

• Weight: 0.5 kg (approx)
• Dimension: 96 x 96 x 115 mm, Cut out size 92 x 92 mm
• Measurement Voltage Range: 57.7 V (100V) - 240 V (415 V) AC 3 phase 4 wire (3 phase 3 wire)
• Tolerance: -30% to +20% of Vn
• Aux Power Supply Range: 80 - 300 V AC/DC or 24 - 60 V DC (Variant)
• Current Range: Available 1-2A and 5-10 A in single variant (field configurable)
• Main Frequency: 50/60Hz with +/- 5%
• Mechanical Enclosure: FRPC
• Max Conductor Size: 2.5 mm2
• Operating Temperature: -20 to 60 Deg C
• Storage Temperature: -25 to +80 Deg C
• Humidity: 95% non-condensing

TDMPC Series Input RTD, Thermocouple(J/K) selectable, RTD/ -50.0 to 400.0 º C, J/ 0-600 º C, K/ 0-1250 º C, Control mode on/off and Time proportional, Hysteresis, Time, Proportional , Offset Selectable , Dual Display ( PV/Time) with Dual Relay Output, Control set Point can be set feather touch keys, Power supply 230 VAC mains operated Power supply :230 VAC mains operated Control mode :Heat/Cool/High& Low Alarm 

• Weight: 375gms. (app.)

The Parameter setup can be done through 4 nos. of soft keys on front fascia, Keys on the front panel is used to scroll, increment, decrement through display parameter and, to set the Meter ID, PT Primary, PT Secondary, CT Primary, CT Secondary values, Time, Date, MD Reset, Energy Reset, MD in KW or KVA, Integration Period, Alarm and Trip set point for all four zones and to change the password.

Humidity controller a wide network of manufacturers and logistics service providers. Therefore, we are able to meet bulk requirements of Temperature and Humidity Controllers, provide them at market leading prices, impose minimal shipping charges and make on time delivery all over India and overseas. Thus, we offer complete customer satisfaction.

• Current: 30 A
• Input Value: 12 V
• Pole Type: Single Pole
• Usage: Robotics
• Features: Extremely low internal resistance, Easy setup and operation, Auto detects number of battery cells, Super smooth and accurate throttle linearity, Safety thermal over-load protection, Supports high RPM motors.
• Packaging Details: CARTON

The Selec TC544 is a sophisticated auto tuning PID controller or on/off controller with selectable thermocouple, RTD up to two outputs. Versions are available with different relay and SSR outputs. The controller can be configured as on/off or PID control and alarm outputs, or as 2 on/off or PID controls (heat/cool) plus 1 alarm output. It has a large dual 4 digit LED display to show the set point and the process value and is suitable for use with power supplies of 85 to 270 VAC.     Features Dual display, 4 digit, 7 segment LED TC / RTD input PID, ON/OFF control Two set points °C / °F selectable Field selectable control output (Relay or SSR) Auxiliary output: Relay Easy to use

• Type: Pid Controllers
• Material: Aluminium, Plastic, Stainless Steel
• Certification: CE Certified, ISO 9001:2008
• Voltage: 110V, 220V
• Condition: New Used
• Rated Power: 100W, 200W, 250W, 40W
• Power Source: Battery, Electric
• Feature: Durable, High Accuracy, Light Weight, Low Power Consumption, Stable Performance

PID Controller setup consisting of Digital PID controller Heater RTD - Temperature control by PID Speed Control of AC and DC drives DC Motor speed control Consisting of, PWM Vs Speed tabulation AC motor Speed control Frequency Vs Speed tabulation   Product Code : SAMS MECH - 010

• Application: All Process Indicating and Controlling systems, Heat treatment Furnace , Oven etc.
• Power supply: 230 VAC mains operated
• Control mode: Heat/Cool/High& Low Alarm

TDMPC Series Input RTD, Thermocouple(JK) selectable, RTD -50.0 to 400.0 º C, J 0-600 º C, K 0-1250 º C, Control mode onoff and Time proportional, Hysteresis, Time, Proportional , Offset Selectable , Dual Display ( PVTime) with Dual Relay Output, Control set Point can be set feather touch keys, Power supply 230 VAC mains operated

PID are used to measure temperature in furnace application, oven application which are available in different sizes. This will accept any input as selectable and any output can be given as per the customers demand. Ramp X Soak is also possible

• Frequency: 50/60 Hz
• Weight: 0.5 kg Approx
• Temperature: -20 Deg C to + 60 Deg C
• Humidity: 95% non-condensing
• Ingress Protection: IP54
• Aux Power Suppluy Range: 80-300 V AC/DC OR 24-60 V DC (Variant)

• Material: Plastic
• Voltage: 110V
• Display Type: Digital
• Rated Power: 100W
• Power Source: Electric
• Feature: Durable, High Accuracy, Low Power Consumption
• Warranty: 1Years

Owing to our in-depth knowledge in this domain, we are able to offer optimum quality PID Controller. The provided product is manufactured with the aid of supreme quality components and modern technology, at our vendors place. It is at par with the defined quality standards. It is rigorously examined against numerous quality parameters, to ensure its flawlessness. We have enough capacity to deliver it in bulk quantities. This is offered at the industry leading price to our esteemed clients.

Avail from us a wide assortment of PH ORP Controller that is marketed under the brand name of ABB. Thesecontrollers include 2 and 4-wire analyzers and single or dual-input devices. The integral advanced functions of these controllers consist of a sensor wash utility, PID control, automatic buffer recognition and in-line sensor diagnostics. Our products are microprocessor-controlled panel-mount analyzer used for accurate and reliable measurement and transmission pH / Redox (ORP). These are extensively used in applications like water treatment plants, boiler water and effluent. The water-wash facility of these controllers forces water through the system at user-configurable intervals for preventing fouling of the pH electrodes. The analyzer of the products provides high performance and advanced functionality in a compact and cost-effective package.   These controllers have rugged construction and are reliable for safe operation in harsh environments. Moreover, these are also simple in terms of installation and require low maintenance.

Direct Input Accept PH electrode, TDS/Conductivity cell TDS Ranges 0-9999ppm or 0-99.99ppt PH Range 0.00 to 14.00 PH, Pressure -1 to1000 Bar/PSI Resolution 0.001/0.01/0.1/1 selectable Display Range -1999 to 9999 Selectable 100-240 VAC mains operated with 24VDC Transmitter supply Offset, Hysteresis, Range selectable, Dual output Retransmission out put 4 -20mA optional Auto/Manual Temperature compensation

Features: PID controller provides high temperature stability as well as warning and safety functions Incorporates latest-generation components for highly reliable refrigeration and pump performance Easy to operate and install Precise temperature stability for repeatable result Space saving design uses minimal space Can be used for open bath applications Applications: Ideal for precise temperature control of external devices, such as a distillation apparatus, automatic able flash point apparatus, fermenter, heat exchangers, jacketed reaction vessels, material testing, analytical instrumentation, condensers and mini plant installation Designed to circulate external closed loop applications

• size: 120 mm

The Bürkert Type 8202 is a compact, but modular device, specially designed for measuring the pH or ORP value of fluids. Our device consists of a replaceable standard 120 mm pH or ORP probe, screwed in a sensor holder with integrated Pt1000 temperature sensor. This ensemble is plugged-in and screwed with a nut to an IP67 enclosure containing the electronic module with cover and a removable display. Bürkert expedites thus maintenance work. The pHORP transmitter can operate independent of the display, but it will be required for programming the device (i.e. selection of pH or ORP sensor type, measuring range, engineering units...) and also for visualizing continuously the measured and processed data.

MP3200iec The MP3200iec controller is the flagship of the MPiec series, offering up to 62 axes of motion control and up to 8 slots for option modules. MP3300iec The MP3300iec controller is the latest installment of the MPiec series. It offers up to 32 axes of motion control and up to 3 slots for option modules. MP2310iec The MP2310iec offers up to 16 axes of motion control and 3 slots for option modules. MP2300Siec The MP2300Siec is a single option module slot controller that offers up to 16 axes of motion control. MP2600iec The MP2600iec rounds out the MPiec Series by offering a single axis of motion control while combining controller and servo amplifier in one unit.