Measuring Instruments Dealers in Porur, Chennai

• Brand Name: LAPMASTER
• Type: Single and Double Sided
• Material: Fused Slica / BK7 and Zerodur

We, Lapmaster Makes high precision and High quality material of BK7, Fused Silica and Zerodur based Optical Flats with Lambda/10 to 1/10th Light band Optical Flatness with Box. 

We are known for offering the best grade Float & Board Type Level Indicator to the clients. Precision designed floats, pulleys, and guide wires and scale boards are used to manufacture the Float & Board Type Level Indicator. The Float & Board Type Level Indicator have an extensive usage in the RCC water tanks, fuel storage tanks, and pressure less storage tanks and lubricating oil storage tanks.

Non-Contact Radar Level Meter measures distance, level, volume and mass. Based on FMCW (Frequency Modulated Continuous Wave) technology, it provides a more stable measurement than pulse radar and is well suited for agitated process conditions and the most demanding applications. Non-Contact Radar Level Meter can measure the level of a wide range of liquid or granular products on a large variety of installations, including LPG and LNG. The level meter does not require calibration or commissioning when installed and can be applied in agitated process conditions and agitated vessels. The product is available in two versions; the RM70 has its electronics designed specifically for liquids, while the RM60 is meant for powders or granulates. How Does It Work? Based on an FMCW radar signal, the level meter transmits a high frequency signal which increases linearly during the measurement phase. The signal is emitted, reflected on the measuring surface and received with a time delay, t (t=2d/c, where d is the distance to the product surface and c is the speed of light in the gas above the product). For further signal processing, the difference is calculated from the actual transmission frequency and the received frequency and is directly proportional to the distance. The level meter comes with an optional second current output that can be used for displaying measurements such as volume. In addition, it offers a wide variety of open (horn) and closed (drop) antenna configurations that can easily be interchanged by the user.

• Output: 230 V AC-50 Hz
• Usage: Laboratory
• Accuracy: 0.2%
• Weight: 300 g
• Dimensions: 190 mm x 100 mm x 34 mm
• Temperature range: 0-50 deg C
• SL NO: 150316

The reliable, repeatable, accurate way to check bearings and overall vibration. Make go or no-go maintenance decisions with confidence. The Fluke 805 Vibration Meter is the most reliable vibration screening device available for frontline mechanical troubleshooting teams that need repeatable, severity-scaled readings of overall vibration and bearing condition. External sensor is also available to measure overall vibration but it’s an optional accessory. What makes the 805 the best choice?   A meter – not a pen – that measures overall vibration as well as specific variables like bearing condition and temperature, to provide a more complete picture.   A combination vibration and force sensor tip that compensates for user variance (force or angle) yielding accurate, repeatable readings.   A four-level severity scale and onboard processor calculate bearing condition and overall vibration using easy-to-understand textual alerts (Good, Satisfactory, Unsatisfactory, Unacceptable).   Sensor sensitivity can read a wide range of frequencies (10 to 1,000 Hz and 4,000 to 20,000 Hz) covering most machine and component types.   Straight-forward user interface that minimizes the user inputs to RPM range and equipment type. Features and Benefits   Innovative sensor design helps minimize measurement variations caused by device angle or contact pressure   Consistent data quality at both low and high frequency ranges   Four-level scale indicates severity of problems for overall vibration and bearing condition   Exportable data via USB   Trending in Microsoft® Excel using built-in templates   Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement for a wide variety of machines   Crest Factor+ provides reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz   Colored lighting system (green, red) and on-screen comments indicate how much pressure needs to be applied to take measurements   Temperature measurement with Infrared Temperature Sensor increases diagnostic capabilities   On-board memory holds up to 3,500 measurements   Audio output for listening to bearing tones directly   External accelerometer support for hard to reach locations   Flashlight for viewing measurement locations in dark areas   Large screen with high resolution for easy navigation and viewing Use the 805 to check the following machine categories: (37 machine categories totally) Chiller (refrigeration)   Reciprocating (Open motor and compressor separate)   Reciprocating (Hermetic motor and compressor)   Centrifugal (Hermetic or Open Motor Fans   Belt-driven Fans 1800 to 3600 RPM   Belt-driven fans 600 to 1799 RPM   General direct drive fans (direct coupled)   Vacuum blowers (belt or direct drive)   Large forced draft fans (fluid film brgs.)   Large induced draft fans (fluid film brgs.)   Shaft-mounted intergral fan (extended motor shaft)   Axial flow fans (belt or direct drive) Cooling tower drives   Long, hollow drive shaft (motor)   Belt drive (motor and fan - all arrangements)   Direct drive (motor and fan - all arrangemetns Centrifugal Pumps Note: height is measured from grade to top motor bearing   Vertical pumps (12’ to 20’ height)   Vertical pumps (8’ to 12’ height)   Vertical pumps (5’ to 8’ height)   Vertical pumps (0’ to 5’ height)   Horizontal centrifugal end suction pumps – direct coupled   Horizontal centrifugal double suction pumps – direct coupled   Boiler feed pumps (turbine or motor driven) Positive Displacement Pumps   Positive displacement horizontal piston pumps (under load)   Positive displacement horizontal gear pumps (under load) Air compressors   Reciprocating   Rotary screw   Centrifugal with or without external gearbox   Centrifugal – internal gear (axial meas.)   Centrifugal – internal gear (radial meas.) Blowers   Lobe-type rotary blowers (belt or direct drive)   Multi-stage centrifugal blowers (direct drive) Generic gearboxes (rolling element bearings)   Single stage gearbox Machine tools   Motor   Gearbox input   Gearbox output   Spindles – roughing operations   Spindles – machine finishing   Spindles – critical finishing What is Crest Factor+?   Crest Factor+ is a new proprietary algorithm (or technology) that takes the confusion out of bearing assessment. The original Crest Factor is used by vibration analysts to identify bearing faults. It is defined as the ratio of the peak value/RMS value of a time domain vibration signal. A key limitation of the original Crest Factor algorithm is that it does not increase linearly as the bearing degrades, making it very difficult to determine the severity of mechanical issues. In fact, the Crest Factor can actually decrease as a bearing nears catastrophic failure due to large RMS values. In order to overcome this limitation, Fluke uses a proprietary algorithm known as Crest Factor+ (CF+). CF+ values range from 1 to 16. As the bearing condition worsens, the CF+ value increases, ensuring the user is easily able to recognize the severity of the problem. To make things even simpler, Fluke has also included a four-level severity scale that identifies the bearing health as Good, Satisfactory, Unsatisfactory or Unacceptable.

SKU: V2 Brand: Baker Product Details: Range: 25mm/1" Resolution:0.01mm/0.0005" Type: V2

• Size: 0.5 - 2 Inch
• Material: Stainless Steel
• Display: Analog
• Brand Name: Esha
• Brand Name: Esha
• Usage/Application: Industrial

16 Character X 2 Line LCD backlight display Non Contact Level Measurement Accurate/Reliable measurement from 0.4m to 10m Inbuilt Temperature Sensor - Automatic Temperature Compensation Over Entire Temperature Range 10° Beam angle or minimum interference All plastic construction with Gold Coated Diaphragm All parameters programmable from keypad 6A Relay Output Builtin RS485 MODBUS (Optional) 4-20mA Optoisolated re transmission output Two relay outputs are provided

• Country of Origin: India
• Type: Analgesiometer
• Material: Mild Steel
• Application: Laboratory
• Voltage: 220 V
• Finishing: Coated
• Current: 0-2 Amp
• Temperature: 0-40 Deg C
• Speed: 30 Tubes/Min

• Measuring Range: -40 to +150 °C
• Accuracy: ±0.2 °C (-10 to +50 °C)* ±0.4 °C (Remaining Range)*
• Resolution: 0.1 °C

The testo 521-3 differential pressure measuring instrument is designed for high-precision differential pressure measurements in air conditioning and ventilation technology. It can be used, for example, for measurements in clean rooms and for flue inspections – thanks to a high level of accuracy and outstanding resolution. In conjunction with a Pitot tube (optional), the integrated pressure sensor measures flow velocities of +1 to +20 ms. The integrated temperature-compensated differential pressure sensor performs measurements to an accuracy of up to ± 0.5 Pa. In addition, you can attach up to 2 further optional probes to the measuring instrument. This means you can flexibly adapt the differential pressure measuring instrument to your application. You have the choice of the following probes: Differential pressure probes Absolute pressure probes Relative pressure probes Temperature probes (e.g. surface probes or immersion and penetration probes)

• Application: Tank Liquid Level Measurement
• Input Value: 2 -10 Mtrs
• Output Value: 4-20 mA
• Enclosure: Plastic
• Accuracy: 0.25% of Full Scale
• Display: 2 LED for Echo and Programming
• Signal Output: 4-20 mA DC, Optional 0-20mA
• Operating Temperature: 0-70 Deg. C Max
• Storage Temperature: -40 Deg. C - 85 Deg. C
• Pressure Rating: Atmospheric Pressure Only
• Voltage: 12 to 24V DC

• Application: Chemical Industry
• Material: Stainless Steel
• Scale Length: 220 mm
• Enclosure: IP55
• Material Grade: SS316

• Feature: Microcontroller based design,
• Accuracy: ± 0.02% + 1LSD
• voltage input: 110 V AC / 230 V AC
• Dimension: 96 (H) x 96 (W) x 80 (D) mm
• Application: Control Panels, Test Benches, Power Distribution Panels.

Design Standard confirms to ISO 5167BS 1042. This is basically an online Rotameter either glass tube (SDG Series) or metal tube (SDMT Series) placed in a By-Pass piping. The only difference is the range orifice of the Rotameter at the inlet. This range orifice is designed in such a way that the differential pressure through the By-Pass piping is equivalent to the differential pressure across the mainline orifice. With this arrangement, rotameter in the By-Pass piping works as a Manometer.

Grain Moisture Meter: We are engaged in trading, wholesaling and supplying a wide range grain moisture meter. With the help of our highly skilled professionals, we are capable of delivering our products in trouble free and timely manner. Empowered with advanced technology and latest techniques, we are able to maximize the satisfaction of our clients by providing them reliable and cost effective products. Further, our ethical trade policies, competitive pricing, transparent business dealings and timely delivery enable us to become the preferred choice of our clients based across the domestic market.

• Type: Digital
• Material: Aluminium
• Color: BLUE
• Model Name/Number: ULT200
• Usage/Application: Industrial
• Packaging Type: IP 65
• Brand: ELECTRONET
• Ambient Temperature: 50C

• Weight: 900 gms Including batteries (Approx.)
• Country of Origin: Made in India
• Model Name/Number: DIT954
• Usage/Application: Industrial & Laboratories
• Brand: Mepcco
• Display: 3 1/2 digits, LCD
• Measuring Frequency: Refer Catalog
• Features: Auto Range, IP44 Protection, etc,.....
• Storage Temp Range: -10 to 50deg C
• Dimension: 190*155*75mm (Approx.)
• Accuracy: +/-3%
• Operating Temperature: 0 to 40deg C
• Resolution: 0.01m ohm
• Power Supply: 12V DC
• Over Range Indication: '1' is displayed
• NA: 3000
• I.R Range: 0.1m ohm to 200G ohm

General Purpose Purge Rotameter

Growell Tech ingenuity and dedication has worked with every type business to successfully process and manage its money. Growell Tech currency counting machines are reliable and consistent performance even for the notes with poor quality. Capitalizing on our experience and excellent reputation in the field of money handling, the machines are designed to continually provide the superior performance demanded and expected by every operator of the equipment.

• Port: CHENNAI
• Place of Origin: Tamil Nadu, India
• Model Number: PH 300
• Lead Time: Shipped in 2 days after payment
• Range: PH 0.00-14.00PH

ion meter, Analytical Instruments, UV VIS Spectrophotometer

Leading Manufacturers of Oxygen Probes, we can supply and do any types of Oxygen Probes   Types of Oxygen Probes|   1. K Type Probe ( with and without Thermocouple) 2. R Type Probe ( with and without Platinum Element) 3. S Type Probe ( with and without Platinum Element) 4. B Type Probe ( with and without Platinum Element)

• Type: Rpm Indicators
• Resolution: 0.1 Rpm For 4.0 To 999.9 Rpm, 1 Rpm Above 1000 Rpm
• Warranty: 1yr
• Country of Origin: India

  CNR 230 is a new approach to Process Measurement integrating Control I/Os which Measures RPM value of any motors or Devices which accepts input from Proximity, Photo Electric, Magnetic Pickup, Potential Free Contact Limit, Pulse Inputs. Our Process Indicator which acts as a controller device with respect to the input by providing two number of Relay's. EERAM is provided to store the Setpoints and constants. Our Device can measure the RPM ranges from 0 to 99999 RPM with Accuracy of 0.01%.

• Type: Currency Counting Machines
• Certification: ISO 9001:2008
• Application: Currency Counting
• Color: Brown, Grey, Light White, White
• Voltage: 110V, 220V
• Condition: New
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Warranty: 1year, 2years
• Driven: Electric

ph indicators, Temperature Indicators, ultrasonic level indicators

winding temperature indicator, Erection of Hydro Generators

36 Channel Paperless Recorder, Clamp On Type Detectors, Geared Motors