MICRO ELECTRIC CORPORATION Ekkaduthangal, Chennai, Tamil Nadu

Available for all possible applications Can be made to customers specifications Types-J,K,T,E,R and resistor sensor Supplied with calibration certificates and accessories Available in Plain, Bayonet, Washer, Leaf and Ring types.   When Ordering Please Specify Type Cable length. Tip diameter & length Drawing for special type configuration.

Short Wave IR Lamp transmits heat in the form of electromagnetic waves at a velocity of approximately 3,00,000 Km/Sec i.e., at the speed of light. These lamps are not only the fastest in transmitting heat but are most suitable for specific applications involving vacuum technology and dust free (clean room) conditions. Request a Quote Advantages Heating is done by radiation, this eliminates loss of energy used for heating media and heat loss due to convection. Here the infrared waves penetrate the material, on which it falls and delivers the heat directly to that material. Models Available Short wave IR lamps are available in different lengths from 5" to 30" or as per customer specifications. Applications PET preform heating in stretch blow molding machines Printing ink drying in offset machines Paper coating drying Pre - heating prior to embossing Screen printing curing on T - shirts Textiles and many more

Micro Electric Corporations, Mica Band heaters are made of Nickel Chrome resistance ribbon precisely wound on specially selected Mica or  Micanite sheet. It is  then      insulated  and  covered  by metal sheathing and rolled to the required shape. We build every technically possible heaters as per your requirement. Rust resistant Sheath. Top Quality Nickel Chrome ribbon. Max. 3.6 watts/cm2. Max. Operating temperature up to 250 °C. Available with inbuilt insulation pad to reduce power consumption. Applications Plastic Processing Machinery. Injection and Blow Moulding. Extruders. Many other Applications. (Medical,Lab-Equipments....etc).

Micro Electric Corporation hot runner heaters are made of nickel chrome resistance wire placed inside chrome nickel steel tube filled with mgo powder and compacted for faster and efficient heat transfer. The heaters are annealed to acquire malleability for bending into any shape. Hot runner heaters with built in thermo couple are also available. Hot runner bushes are produced with hot runner heaters of different cross section with inner brass and outer stainless steel cover. Moulds & Dies. Manifolds. Hot runner nozzles and spruce bushes. Packaging machineries. Manifolds. Injection moulding machine nozzle. Available in following cross section     3.0 x 3.0, 3.30 x 3.30, 4.50 x 4.50 mm 4.20 x 2.20, 4.50 x 2.50, 3.20 x 1.80, 1.30 x 2.30 mm 3.30, 1.80, 1.60, 1.35 mm   Any other cross sections can be manufactures and supplied on request. Features Sheath temperature upto 800oC   Higher watt densities Build in Type "J"  (or) "K" Thermocouple Rugged & Durable Construction. Available as per customer's specifications

PRODUCTS     HOT RUNNER CONTROLLER Micro Electric corporations, Hot Runner Controllers are efficient and economical. Our Multi zone Hot runner Controllers are by single temperature control modules assembled in a cabinet. SSR controlled outputs (or) Thyristor controlled outputs to control Hot runner Heaters & Manifold Heaters are available. Features   Advanced P I D Control algorithm Maximum output power per zone : 3600 watts Supply Volts : 230v / 415v - 3 Phase Dual Display: Set point and actual temperature Thermocouple input : Universal Type Temperature display : oC (or) oF selectable Output : SSR / Thyristor Applications For Controlling Hot Runner heaters & Manifold Heaters in Plastic Injection Moulds.

Micro Electric Corporation High Watt Density Cartridge Heaters are manufactured with most advanced technology and quality raw materials, enables usage with high watts in small spaces and advanced manufacturing process ensures our heaters are vibration proof and thus ensures excellent reliability in heavy duty working conditions (Like Plastic Processing, Printing, Packaging and automobile industries where the heaters are subjected to heavy vibrations). The high performance is achieved by correct installation of the cartridge heaters. The perfect fitness of the heater in the hole facilitates good heat exchange between the surfaces of heater and mass to be heated thus increases the heater life and reduces energy loss. Sheathing material : SS 304 and SS 316. Available with inbuilt Thermocouple 'J' or 'K'. Maximum sheath temperature 800oC. Rugged & durable construction. Highly compacted construction improves heater life and reduces the effect of vibration and shock. Excellent heat transfer. Applications Plastic processing machinery. Hot runner mould. Packaging machinery. Dies & moulds. Shoe machinery. Labeling machineries and a lot of other applications. Food processing machinery. Hot Stamping. Heating gases and liquids. Mounting Bore Clearance The gap between the heater O.D and the bore I.D should be very close. To determine Fit Fit = Largest hole I.D - Min heater O.D Ex: Heater O.D = 12.5 mm (± 0.06mm std. tolerance) Hole I.D = 12.6 mm (± 0.02mm hole tolerance) Min heater O.D = 12.44 mm Largest hole I.D = 12.62 mm Fit = 12.62 - 12.44 = 0.18 mm (max permissible clearance)

Micro Electric Corporations Ceramic infrared heating elements are efficient, heaters which provide long wave infrared radiation. They are used in a diverse range of industrial processes such as thermoforming, paint curing, printing and drying. They are also used very effectively in infrared outdoor heaters and infrared applications Micro electric Corporations Ceramic elements operate in the temperature of 300°C to 700°C (572°F - 1292°F) producing infrared wavelengths in the 2 - 10 micron range. Most plastics and many other materials absorb infrared best in this range, which makes the ceramic heater the most efficient infrared radiant emitter on the market. A range of aluminised steel reflectors are also available to ensure that most of the radiation generated is reflected forward on to the target area. Our Infrared Heaters are designed to produce maximum output in form of heat energy. They are constructed by a firmly burnt-in heating coil. The heater incorporates highly heatproof resistance wire that provides safety against any damage. We supply Custom Wattage Infrared Ceramic Heaters as per the requirement of our clients.Longer service life is achieved since the resistance of the heaters is made to remain constant over the whole temperature range. The glaze used in this heater has excellent radiation properties therefore the radiation efficiency is also very high. This heater is available with Color Changing Feature as Yellow Ceramic IR Heater (CC FSR). Our Ceramic Infrared Heaters are available in two standard models1. Full Length 245mm(FSR) 60mm 250 to 1000W2. Half Length 122mm (FSR/2) 60mm 125 to 50  

Micro Electric Corporations, Ceramic Band heaters are made of helically wound Nickel Chrome resistance coil precisely stretched and strung through steatite ceramic cores forming a flexible heating mat. It is then placed in flexible stainless steel housing with ceramic fiber insulation. These heaters are very flexible and can be fitted easily. We built every technically possible heaters as per your requirement. Nickel Chrome Resistance Wire. Ceramic Fiber Insulation reduces power consumption by 20 to 30%. Available with heating & cooling combination. Max.7 watts per sq.cm. Max.Temp.250oC. Terminal Box, European plug option. The electrical connection is available with cable outlets or post terminals covered with junction box. The heater can be manufactured from a diameter of 38 mm upward. For special type of terminals, drawing is required. Applications Plastic Processing Machinery.        Injection and Blow Moulding.        Extruders. Many other applications.     

Micro Electric Heaters cast-in heaters are available in a variety of designs and styles suitable for different applications. Microelectric Heaters, cast-in band heaters are available with cooling tubes for heating and cooling barrels of plastic processing extruders. They are very efficient and provides long lasting trouble free service. Microelectric Heaters, cast-in heaters are made in aluminum,brass and bronze. The type of alloy to be casted depends upon the application,max operating temperature & watt density. We built every technically possible heaters as per your requirement. Features Efficient Heat Transfer. Cast-in heaters can be supplied with cooling tubes & end fitting. Various Heater terminations. Uniform surface temperatures. Also as per your requirements. Max watt density: Aluminum alloy - 35 w/sq in on heater elements Brass alloy - 45 w/sq in on heater elements. Max temp: Aluminum alloy - 375 °C  Brass alloy -  650 °C   Applications Injection and Blow Moulding Extruders Moulds & Dies Packaging machinery Medical equipments Thermoforming equipment