Molded Rubber Products Dealers in Chennai

  » Cushy foot type mounting A and B series.    » Round foundation - mounting beds for all kinds of machine size 50mm, 85mm, 125mm, 145mm, 165mm ,       185mm, 200 mm and 250mm to with stand load up to 2.5 tonnes per mount.    » Special type rubber dampers with load bearing capacity of 5 tonnes & above per damper.    » Anti vibration beds with both side bolts or single side bolts.    » Plain rubber pads.    » Serrated rubber pads for light M/c and A/c plants.

Insulation Superlon insulation materials are engineered with the highest standard. Our closed cell characteristic is the key component to an effective insulator by providing a barrier between the pipe’s surface and atmospheric conditions.   Low thermal conductivity and high moisture resistance:   Superlon’s insulation materials are produced with a high percentage of closed cells.   Superior fire performance:   Superlon’s insulation materials are available in Class 1, Class 0 and FM Approved. In addition, Superlon insulation materials have a high oxygen index.   Continuous commitment to provide the best:   Superlon invests in R&D and are striving to further enhance its formulation to provide the best insulation solution.   Fast and easy installation:   Superlon insulation materials are very flexible allowing installers to fabricate, cut to specific shapes, sizes and fittings for fast and efficient installations.   Low allergen:   Unlike other types of insulation products, Superlon insulation materials are dust and fiber free which do not present any health related hazards.   Eco Friendly:   Superlon materials have zero Ozone Depleting Potential (ODP), zero Global Warming Potential (GWP) and low Volatile Organic Compounds (VOC). Applying Superlon Insulation materials properly also helps to reduce energy consumption of air conditioning and heating units.   Aesthetically pleasing:   Although Superlon’s insulation materials are mainly black in color, the surface of the skin is smooth presenting a respectable finish on any given job type. Color products are also available

• Color: Transaparent
• Packaging Size: 10
• Sheet Size: 5 x 5 cm, 10x10cm, 20x20cm and 40x40cm
• Usage: Domestic, Clinical

• Country of Origin: India
• Type: Flexible
• Material: Rubber
• Application: Industrial
• Color: Black
• Size: Standard

• Country of Origin: Made in India
• Color: Black
• Application: Tyre and Allied Products
• Quantity Per Pack: 40Kg

Imported Silicon Rubber plate laminated on Aluminium sheet & Rubber rollers in different sizes available.

• Type: Breathable,Sustainable,Long Density Retention
• Brand Name: Gretain
• Material: Latex,Natural Latex
• Shape: Rectangular
• Color: Black,Blue,Creamy,Green,Red,White,Yellow
• Application: Automotive Interiors,Carpets,Furniture,Shoes Insole
• Size: 40X30inch,1 Meter X 0.75 Meter
• Feature: Durable,Flame Retardant,High Strength,Softness
• Country of Origin: India
• Breathable: Sustainable

• Type: Talcum Powder

.talc powder   hs code 25262000   using talc as filler in paper imparts valuable properties to the final product   1.improved printability   it makes the paper smooth and slippery due to which it runs smoothly through the printing process. it offers compressibility which ensures maximum ink transfer thereby improving opacity of printing and allowing minimum mottling, smearing or missing dots.   2.better look and feel   talc is high in whiteness and thus results in high whiteness of the paper. talc adsorbs the optical brighteners and/or color coatings added to the paper due to which they stay on the surface of the paper, providing maximum effect. its smoothness and slipperiness gives good finish to the paper.   3.improved strength and durability   talc offers high paper strength potential which implies that one can load high amounts of the filler with minimum compromise on the final strength of the paper.   barrier coatings are often added to the paper to impart durability. talc minimizes water vapor transmission from the paper, thereby further enhancing the sealing effect of the coatings.   4.improves efficiency of the paper making process itself   talc is hydrophobic in nature and therefore permanently absorbs organic particles present in paper pulp called pitch (or stickies, if they are tacky in behaviour) into its molecular layers. such particles would otherwise adversely impact the paper making process. talc is soft and therefore causes minimum wear and tear of machines through the paper making process. talc improves drainage of water thereby allowing the paper to dry quickly. further it minimizes loss of other substances during drainage.   for use in paper industry, pulverized material of 300 bss sieve is required, which is free from gritty material and contains low levels of caco3 and feo.   we can access every suitable grade of talc and blend them to your requirement with consistency, perfection and cost effectiveness. against order we are ready to supply for the following industries suitable talk powder agriculture ceramics cosmetics paint paper pharmaceuticals pigment plastics rubber

• Brand Name: Lysil
• Storage: Lysil must be stored under normal storage conditions
• Availability: 5x7, 8x10 cm etc.
• Shelf Life: 5 Years
• Use in: Hospital, Clinic etc.
• Apparence: Transparent

Silicone Gel Sheet for Effective Scar Management : The skin can be damaged in multitude of ways that can be a burden to the patient particularly when it develops into red and raised hypertrophic and keloid scarring. Restriction of movement as well as itching can cause great discomfort and emotional distress. Unacceptable scarring can be induced by a variety of factors including burns, accidental trauma and chronic wounds. A scar is part of the normal process of healing. The type of scar that forms can depend on a variety of factors including the nature of the injury, the part of the body, size and depth of the wound. Scars mostly consist of a protein called collagen, which is the most common tissue in the body. Keloid scarring is the result of build up of collagen in the area, making the scar larger than the actual size of the wound whereas hypertrophic scarring is without the excess collagen build up so that the scar is confined to the original wound area. The Silicone Gel Sheet is derived from high quality polysiloxane material. It is believed that it promotes hydration of the scar area and the concept has been medically proven to improve the appearance by softening, flattening and fading red and raised scars. Some injuries will leave a flat white scar that will normally fade away in time and Lysil is not recommended for these type of scars. Salient Features : F Excellent biocompatibility as per EN ISO 10993 standards F Extreme purity F Enhanced performance F Permeable to water vapour F Air permeable F Reinforced with fine Dacron fabric which enhances the durability and handling properties F Preserves the skin elasticity and effectively prevents tissue from drying out Indications : F Red and raised, old and new scars F Hypertrophic scars F Keloids F Treatment of erythema following resurfacing treatments with CO lasers, chemical peels 2 and dermabrasion Instructions for use : F Wash hands before and after use. F Clean the scar with a mild soap and rinse with warm water. Thoroughly dry the scar and surrounding skin. F Remove the Lysil™ from the pack. F Cut the gel sheet to a required size to suit the scar area. F Remove the plastic liner sheet. F Place the gel sheet, adhesive side to the scar, without stretching. If necessary a light bandage or tape can be used to keep the Lysil™ in place. F Initially for two to three days, use Lysil™ for 2-4 hours. For next two days use for 4-8 hrs each day. Then increase the wear time to 12-24 hours. F Clean the Lysil™ with a mild soap and rinse well and dry with a non fluffy / lint free towel as and when it is required. F Wash the scar and the surrounding skin area with soap, rinse well and dry. F Lysil™ should be replaced when the thickness of sheet is reduced beyond its usability. F Lysil™ has to be used for 2-4 months to get a very good result.

• Thickness: 0.5mm, 1mm, 2mm, 4mm, 5mm
• Finishing: Polished, Non Polished
• Packaging Type: Roll, Bundle
• Usage: Electrical, Marine, Insulation
• Specialties: Fire Resistant, Anti Cut, Smooth Surface
• Material: Natural Rubber
• Shape: Square
• Color: Black
• Pattern: Plain
• Country of Origin: India

• As per requirment: As per requirment
• As per requirment: As per requirment
• As per requirment: As per requirment

We are expertise to manufacture quality based small components to marine Fenders. Our Production capacity  

• Packaging Type: 25 kg

Details : Talc IP/BP Available in 25Kg Pack. Talc, or talcum, is a clay mineral, composed of hydrated magnesium silicate. Talc in powdered form, often combined with corn starch, is used as baby powder. This mineral is used as a thickening agent and lubricant. It is an ingredient in ceramics, paint, and roofing material. It is a main ingredient in many cosmetics. Talc is added to cosmetics to create a silky feel and absorb moisture. Talc is also used as food additive or in pharmaceutical products. More Information   Synonyms Purified Talc, Magnesium silicate monohydrate CAS No 14807-96-6 HSN CODE 25262000 Chemical Formula Mg3Si4O10(OH)2 Approx Dispatch 7-8 Days           Packing 25Kg Bag Country of Origin India Hazardous Cargo     No    

Our wide area network helps us in delivering the products across Chennai(India) and other markets. Purchasers can get in touch with us all year round for acquiring superior-grade EPDM Extruded Rubber at competitive prices.

• Diameter: 80, 100, 125, 160 Mm
• Color: Black
• Surface Finish: Studded Surface to Avoid Skidding After Impact.
• Diameter: Favorable Diameter-to-height Ratio Avoiding Buckling
• Weight: Varies Depending On Size
• Country of Origin: Made in India
• Temperature: Wide temperature stability - 40'C to 80'C.
• Materials: Microcellular Polyurethane with 0.55 Gm/cm3 Density
• Application/Usage: Cranes, Industrial Lifts, Scissors Lifts, Wagons, Loading Docks & Platforms.
• Compressibility: Upto 75% of Buffer Length. High Volume Compressibility Results Into Minimal Bulging.

• Material: Silicone Rubber
• Thickness: 10-20mm
• Color: White
• Feature: Durable, Superior Finish
• Finishing: Polished

Soft Cut Gaskets:- Soft Gasket is a term used when referring to a gasket that is easily compressed under a low bolt load. Soft gaskets are used as heat exchanger gaskets, compressor and bonnet valve gaskets and in pipe flange applications etc. As leading gasket manufacturers and suppliers Goodrich Gasket Pvt. Ltd. offers varieties of cut shape / gasket material in sheets / rolls out of the following soft gasket materials: 1. PTFE Gasket Sheet 2. Flexible graphite sheet 3. Rubber of all grades, cloth inserted rubber & metal inserted rubber gaskets. 4. Ceramic / Glass Fiber 5. Vegetable Fiber sheet 6. Asbestos & Non Asbestos sheet 7. PTFE Envelope gaskets PTFE (Polytetrafluoroethylene) is an inert material with excellent chemical resistance, electrical and thermal insulation. They can be operated in temperatures from cryogenic to 2600C offering non-corrosive, non-wetting, non-contaminating and odorless operation. PTFE gaskets by Goodrich Gasket are mainly used in the presence of aggressive chemicals such as acids, bases and solvents. Neoprene Gasket used in weather sealing and electrical installation applications possesses good chemical inertia and is appreciated for non-marking, high abrasion resistance, ozone and oil resistant, flame resistance and weather aging characteristics. Gasket materials offered: Neoprene (CR), Nitrile (NBR), Natural Rubber (NR), EPDM etc. Compressed Non Asbestos Fiber Gaskets are circle cut or die cut gaskets from compressed non asbestos jointing, manufactured from carefully picked fiber intimately blended with suitable heat resistant binders and vulcanized into sheets of homogenous compositions and uniform thickness. RAISED FACE FULL FACE Non-Asbestos Jointing Sheets are made of special non-asbestos heat-resisting fiber, heat-resisting packing material and special rubber compound by heating and compression molding it. These are used in high temperature and high pressure gasket applications.

We offer excellent quality Quartz Powder that is free from iron and other impurities. Quartz Powder is immensely used in electronics products like televisions, cell phones, computers, radios, etc. We have two Ball mill in different areas one at mine site and other near port. Our Quartz Powder is appreciated for purity, accurate chemical composition and fine texture.

Specification Fiberglass silicone Rubber Sleeving 1 Good breaddown Voltage for wire 2 flat surface 3 different color 4 stand high tempe FIBERGLASS SLEEVES COATED WITH SILICON RUBBER     PRODUCT DESCRIPTION Nominal voltage:300v Temperature range:-60 °C-+200 °C Testing Voltage:1.2KV,1.5KV,2.5KV,4.0KV,5.0KV,7.0KV USE:Internal wire of appliance ,home appliance,industrial mechine or electronice equipment where exposed to high temperature     1.SiliconSleeves specification 1.Broke through an electric an electric voltage value

• Material: Nitrile Rubber
• Color: Black
• Size: 1 Meter X 1 Meter
• Shape: Square
• Country of Origin: Made in India
• Brand: Aeroflex

• Color: Black
• Material: Rubber
• Size: 450 X 240X100mm
• Weight: 11.5 Kg
• Features: Easy to install, Reliability, Smooth finish
• Brand: JP
• Shape: Rectangle

• Feature: Sturdy design, Perfect finish, Light weight
• Application: Industrial
• Brand Name: Alpha Knives & Blades

• Material: Neoprene Rubber
• Thickness: 5 to 10 mm
• Color: Black
• Brand Name: Roshini Rubber Products
• Temperature Range: -40 degree to 145 degree C

• Features: Suitable for extremely hot zones, Low permeability, Resistive to chemical attacks.
• Element temperatures upto: 1625°C (2927°F)