Particle Sensors Dealers in Chennai

• Country of Origin: China
• Warranty: 1year

PM2.5 PM10 Sensor This pm sensor mainly adopts a wall-mounted installation method to detect the concentration of PM2.5 and PM10 in the room. The shell is made of high-strength waterproof material, which is not easily interfered with by water vapor and smoke in the air. This is an industrial cheap air quality sensor with high measurement accuracy and a wider range of use.         PM sensor description   The working principle of the  industrial pm2.5 pm10 sensor is: using the principle of laser scattering measurement, and the scientific and unique algorithm calculates the particle mass concentration of the equivalent particle size per unit volume. This PM2.5&PM10 sensor delivers fast, accurate, and stable performance can be used stand-alone or as the foundation of an OEM indoor air quality PM detector. This pm2.5/pm10 sensor uses a 10-30V wide voltage power supply, with RS485, 4-20ma, 0-5v, 0-10v, and other output methods. Air quality sensor features 1. Range: 0-1000ug/m3, resolution 1ug/m3.2. PM2.5 and PM10 are output at the same time.3. Unique dual-frequency data acquisition and automatic calibration technology, the consistency can reach ±10%.4. Long service life, the overall warranty is 2 years in a normal environment. pm2.5 pm10 sensor parameters Power supply: 10-30VDCOperating temperature: -20℃~+60℃，0%RH~80%RHMeasure range:PM2.5: 0~1000ug/m3PM10: 0~1000ug/m3Resolution: 1ug/m3Accuracy: ±3%FS(@100μg/m3,25℃,50%RH) Responding speed: ≤90SPreheat time: ≤2minOutput signal: RS485/0-5v/0-10v/4-20ma   PM sensor application This iot air quality sensor can be used on a variety of different occasions. It can be used to monitor outdoor meteorological environments. It can be used with other gas sensors to monitor industrial waste gas. It is installed in libraries, warehouses, supermarkets, office buildings, and other indoor areas to detect particulate matter concentration. It can also be used in greenhouse planting and livestock breeding industries.

We are offering particle counting sensors

• Features: Large selection of probe for a wide range of holder and Useable for pipe DN15 to DN200

The pH or ORP Bürkert meter is a modular device designed for the measurement of: - the pH in clean liquids or liquids containing solids, sulphides or proteins. - the oxidation-reduction potential in clean liquids or liquids containing solids, sulphides or proteins which may present low conductivity.

pH levels are important in soils, irrigation water and spray tank solutions. Soil and water pH is the single most important aspect in determining nutrient availability to crops. pH levels in spray tanks determine the effectiveness of pesticides. This multi-purpose meter to help provide a healthy growing environment for all plants. It tests for soil alkalinity / acidity, soil moisture, and sunlight. A pH Meter is a device used for potentiometrically measuring the pH, which is either the concentration or the activity of hydrogen ions, of an aqueous solution. It usually has a glass electrode plus a calomel reference electrode, or a combination electrode.[1] pH meters are usually used to measure the pH of liquids, though special probes are sometimes used to measure the pH of semi-solid substances.  3in1 Moisture PH Light Meter for Hydroponic Plant Soil # Ideal tool for both indoor and garden plants care # Please clean the electrode after each use * 1 X 3 IN 1 PH LIGHT METER FOR PLANT SOILFEATURES. With this 3 in 1 soil meter you can check in your garden, vegetable garden, lawn and potted plants whether the soil is suitable for a particular plant. Use the device to measure growing conditions for all kinds of plants indoors and outdoors. You can also check the humidity in the soil, the temperature and intensity of sunlight using this ground meter. This 4 in 1 pH soil meter can be especially useful in lawn care in determining the soil conditions in different areas of your garden and finding the correct lawn seed and fertilizer. Bad spots in the lawn can be caused by poor drainage (wet soil, test the moisture), too much or too little acidity (test the pH), or the wrong light level (test light and use appropriate seed mix (sun/shade).

• Range: 0 to 14 pH (with included probe, 0 to 12 pH)
• Accuracy: ±0.1 (after calibration)
• Resolution: 0.01 pH
• Electrode: gel-filled Ag-AgCl combination electrode
• Maximum Sample Rate: 50 Hz
• Operating Temperature Range: -4° C to 80° C

Recommended Alternative — The Wireless pH Sensor can perform all of the functions of the PASPORT pH Sensor at a lower price. Best of all, it connects directly* to your computers, tablets, smartphones and Chromebooks without the need for an interface and with no cables to get in the way. *Devices without native Bluetooth® Smart connectivity will require a low cost USB adapter – see the product page for details. Overview Resolution is a very important feature of pH meters, but high resolution is useless if the noise is high. Our pH Sensor’s digital technology gives you 0.01 pH resolution and low noise to produce more accurate, stable data. Useful for large pH changes as well as subtle changes. Typical Applications Titrate an acid into a base Investigate the chemistry of buffers Monitor water quality

Yokogawa PH-Conductivity-DO-ORP Sensors, Yokogawa Paperless Recorder

Particle Sensor, Air Flow Transducers

pH / ORP Sensor, PH & ORP Transmitter, Bellow Valve, Safety Shut Off Valve

ph sensors, pH Buffer Solution, spectrophotometer quartz cuvette

ph sensors, Biometric Reader- R305, Hm2007 Voice Recognition