Plasma Cutting Machine Dealers in Chennai

Highly dynamic, optimised operating cycles and the most compact design are the correct measures to give optimum support to the efficient and robust fibre laser technology. “In line” plate alignment recognition, axial accelerations of up to 1.5 g and a dynamic hole piercing process reduce the “unproductive cycle times” to a minimum. Real time control of the laser power (“ZipCut” function) allows previously unknown dynamic performance for sheet thicknesses up to 2 mm. Special software splits the components in a completely new way independently of their individual contours. Wherever possible the cutting head processes all contours lying in one direction. On the paths which are to be cut, flying starts come from the motion and the laser power is switched off synchronised to the end of the cutting path. The cutting program is quasi processed in rows and columns, paths are optimised and collisions avoided strategically. This means that the majority of the braking and acceleration cycles no longer happen. The FiberBlade IV is convincing not only through this but also by its remarkably smooth running despite its highly dynamic performance. Touchscreen control, clear structuring of the control, optimum accessibility to the cabin as well as “auto calibration of the nozzle characteristics” increase operator comfort. A mere 14 seconds for the pallet swap and automatic slag removal in both cutting and unloading areas complete the picture. Minimal maintenance requirements and online diagnostics facilitate very economic performance and maximum availability. KEY FEATURE: Cutting system with fibre laser: 2 to 6 kW Efficiency 25 % – 35 % Low accelerated masses Linear guides Diagonal toothed drive racks High acceleration up to 1.5 g Simultaneous speeds up to 140 m/min Positioning accuracy +/- 0.03 mm Repetitive accuracy +/- 0.01 mm Automatic calibration of height sensing Automatic focal point adjustment Multi staged, fast piercing ZipCut function Suppression of “torch lifting” wherever possible Lowest maintenance and adjustment work Simplest operation, consistent control with remote maintenance Unbeatable cut metre costs Complete laser protection system Automatic nozzle cleaning Modular handling systems available

• Effective Cutting Width: 1-6 Metre
• Effective Cutting Length: 2-12 Metre
• Strip Cutting Thickness: 10-50 mm
• Voltage: 220V
• Frequency: 50-60Hz

• Usage: Industrial
• Voltage: 380-440 V
• Model Number: PAK 200i
• Material: Stainless Steel
• Brand Name: Victor Thermal Dynamics
• Gas Supply: - Plasma Gas - Air,ArH2,N2 - Secondary Gas - Air,N2
• Capacity: - Max Cut - 2 3/4" (70 mm) - Pierce Rating - 1 1/4" (32 mm)
• Rated Duty Cycle: 100% @ 200 Amps
• Rated Duty Cycle: 100% @ 200 Amps
• Item Weight Kgs: 490 lbs w/o torch (222 kg) Fully Assembled Power Supply

• Max Cutting Thickness: 10 mm
• Max Cutting Speed: 500-1000 mm/min
• Automatic Grade: Automatic
• Brand Name: Sai
• Phase: Three Phase
• Minimum Order Quantity: 1 Piece
• Max Cutting Width: 0-500 mm
• Max Cutting Length: 500-1000 mm
• Output Current (Ampere): 100-200
• Coolant Tank Capacity (Litre): 25 Ltr

We offer a variety of plasma cutting machines that are used for various cutting applications for stainless steel, aluminum and all other ferrous and non-ferrous metals. These machines are based on the latest and effective technology and use high-grade materials in the manufacturing process. This ensures high durability, robust structure, resistivity to adverse conditions and low maintenance cost. Moreover, customers are eased with the availability of the cutting machine.

• Brand Name: LARC

We are manufacturers cnc plasma cutting machines along with we supply hypertherm machines, product model : larc1530.

• Voltage: 380V
• Dimension: 3565*2085*1200mm
• Cutting area: 1500*3000mm
• Quantity of cutter: 2 nos
• Platform size: 3007*1504mm
• Plasma power supply: Domestic / USA
• Cutting way: HF & HP Cutting way
• Cutting Thickness: 0.5 – 30mm
• Cutting width: 1mm
• Acceleration speed: 20000mm/min
• Acceleration speed: 20000mm/min
• Total Power: 9kw
• Max. cutting speed: 1200mm/min
• Air pressure: 65-75psi/ 4.5-5.2 Bar

We are offer Kjellberg Plasma source as OEM Partner As pioneers in plasma cutting we have worked intensively on refining this separating process since 1959. We offer you diverse products for CNC-guided and manual plasma cutting. Being the technology leader and oldest manufacturer on the market, Kjellberg Finsterwalde's products of the HiFocus series achieve highest cutting quality and are, therefore, a serious alternative to laser cutting or other precision cutting methods. With Kjellberg Finsterwalde's products - Made in Germany - users not only acquire state-of-the-art plants but also the latest plasma cutting technology. HiFocus stands for highest cutting quality. It allows not only cutting in vertical position and with a smooth surface but also with almost no further treatment required. The plasma units of the FineFocus series are very robust and achieve excellent cutting quality combined with highest reliability even under extreme conditions. Furthermore, they allow underwater cutting and cutting with air as plasma gas. The cost-efficient units of the PA-S series offer good cutting results for simple applications. The liquid-cooled plasma torch allows the use of air, oxygen, argon and hydrogen as plasma gas. Furthermore, these robust plasma cutting units can be operated with hand and machine torches. CutFire stands as synonym for powerful but technically simple plasma cutting inverters at low investment costs which are suitable for mechanised cutting of thin sheets. Kjellberg's systems for manual plasma cutting can be used for many applications. According to the customers' preferences there are diverse systems which are perfectly tailored to their individual requirements.  

We manufacture and supply best quality cnc portable flame and plasma cutting machine with best price with technical service support and warranty.

• Automatic Grade: Semi-Automatic
• Color: Red and black
• Feature: Maintenance free

• Software PLC screen: 512 kb

Our plasma cutting machine can easily be operated and carried. It is produced with latest production technologies and used well – known and accepted cutting and CNC Equipments. High Plasma Technology provides high quality cutting on a wide range of material type and thickness. The acceleration of the system moves the torch on part, vibration features, accuracy on movement control, cutting speed and repeatition availability, strong mono block frame, accuracy rails, rack and pinion and servo motors provides the high cutting quality on the plasma cutting machine.

• Max Cutting Thickness: 25 mm
• Voltage: 320 V
• Country of Origin: Made in India
• Automation Grade: Fully Automatic
• Usage/Application: Industrial
• Frequency: 50 Hz

• Material: Stainless Steel
• Automatic Grade: Fully-automatic
• Cutting Method: Plasma
• Max Cutting Thickness: >30 mm
• Max Cutting Speed: >4000 mm/min
• Max Cutting Length: 6000mm

• Speciality: Precision designed, Easy to use, Perfect finish .
• used: for cutting various items in manufacturing industries.

• Max Cutting Speed: 0 to 4000 mm/min
• Rated Power: 8.5 KW
• Cutting Method: Plasma
• Max Cutting Length: 500-1000 mm
• Working Area: 1500 x 3000 mm
• Input Voltage: 380 V
• Automatic Grade: Automatic
• Material Of Construction: Cast Iron

CNC Plasma Cutters, CNC Cutters, CNC Gas Cutters, CNC Plasma Cutting Machine

Plasma Cutting Machine, Groundnut, Groundnut Chikki, Til Chikki

CNC Plasma Cutting Machine, CNC Flame Cutting Services

CNC Plasma Cutting Machine, Side Beam Welding Carriage

CNC Plasma Cutting Machine, Submerged ARC Welding Machines