Plastic Rods Dealers in Chennai

• Material: Cast Nylon
• Surface Finishing: Polished
• Shape: Rectengular, Round
• Color: Creamy, White
• Condition: New
• Certification: ISO 9001:2008 Certified
• Density: 1.14 To 1.16 G/cm3
• Type: Cast Nylon Rods
• Thickness: 6 To 100 Mm
• Single Piece Length: 3 Meter
• Diameter: 16 mm to 200 mm
• Melting Temperature: 215 Degree C

We are offering peek rod. grades : virgin peek, 30% glass filled peek, 30% carbon filled grade, self lubricating grade standard length is 1 mtr. Long. Cut sizes also can be supplied

R PVDF membrane for mbr applications

• Country of Origin: Made in India
• Color: White
• Material: PTFE
• Shape: Round
• Brand: Madras Asbestos Stores
• Diameter: 50 mm
• Packaging Type: Bundle
• Packaging Type: Bundle

• Color: Yellow
• Material: Polyurethane
• Single Piece Length: 3 meter, 6 meter
• Brand: Neustro
• Size/Diameter: 4 inch

• Type: Antique
• Color: Brown
• Material: Wooden
• Length: 3 feet
• Diameter: 28MM
• Size: 12 FEET
• Pattern: Plain

A prominent supplier of huge range of Oil Seals.

• Type: Solid
• Material: Teflon
• Shape: Round
• Thickness: 10-20mm
• Color: White
• Pattern: Plain

• Shape: Round
• Color: White
• Material: PTFE
• Country of Origin: Made in India
• Size/Diameter: 2 inch
• Single Piece Length: 3 meter

  A Component of machine that seals lubricants, an oil seal is constructed of rubber, garter, spring, and an internal case. While preventing the leakage of lubricants, water, or chemicals, an oil seal also prevents the entry of dust and dirt into a machine.

we are engaged in o埛�ering Polycarbonate Rod . we make sure that the 韌�ne quality raw materialwhich Superior impact strength. its features were Outstanding mechanical strength and sti埛�ness.

We are instrumental in offering premium Oil Seals to customers. They are manufactured in adherence with the set industry norms at our vendors’ end.  Our Oil Seals are highly appreciated for various attributes such as water resistance, flexibility, easy fitting, and high strength. They are used in gearboxes, hydraulic cylinders etc. Oil Seals are also used for preventing lubricating oil from leaking under high pressure.

• Features: Corrosion-resistance, Sturdy structure, Durability

We offer cast nylon rods that are manufactured from top quality raw materials and are procured from reliable sources and are stringently checked for quality. We provide these rods in both standard and custom facility at most competitive prices.   Some of the features are as follows: •Higher tensile strength•Compressive strength•Greater hardness•Modulus of elasticity•Higher wear resistance•Lower distortion at higher temperatures•Lower moisture•Better dimensional stability•Better resistance to solvents These cast nylon rods can be used in various engineering applications on account of their outstanding characteristics such as: •Reduction in weight•Self lubricating•Economy•Shock resistance•Improved dimensional•Stability•Vibration damping performance•Excellent chemical resistance•High wear and abrasion resistance•Noise reduction•High service temperature•High tensile and compressive strengths•Machining

• Features:: Hardness, Tensile strength, Size tolerance

Our customers can purchase from us a wide range of Oil Seals that is available in various designs, sizes and shapes. These oil seals are extremely durable and perform well, hence are widely demanded.We are an authorized distributor of Royal Plus for high quality oils seals, which are used in order to retain the lubrication and even to exclude dirt and moisture. Designed to seal the opening between a stationary or rotating component, these can also be used to seal the opening between two components in a particular relative motion.

• FEATURES: High surface hardness High mechanical strength and stiffness Good Wear resistance

PET Rods & Sheets have excellent wear resistance, a low coefficient of friction, high strength, and resistance to moderately acidic solutions. They also have good creep properties coupled with low distortion under mechanical loads.

• Material: Polytetrafluoroethylene
• Application: Chemical Industry
• Color: Black
• Length: 100 mm
• Polymer Type: Copolymer
• Size: 8 Inches
• Tensile Strength: 25 MPa
• Melting Point (Degree C): 100Degree C

One-stop acrylic plastic sheets solution is our customer service motto. Confidence with standards in quality and the best of customer service is our business theme. We believe in long term business relationship and enjoy wide base of customers from all areas and sectors. Based in Maharashtra state of India, we have manufacturing unit at Jalgaon and sales depot at Chennai.

We are one of the leading manufacturers, suppliers, and exporters of high quality PTFE Rod. These products are ideally suited for the manufacture of corrosion-resistant gaskets and seals. These products are manufactured using high quality raw materials that are sourced from reliable vendors. These products are highly appreciated for their insulating and chemical resistant properties. These products are self-lubricating material that provides a low friction coefficient. Molded PTFE sheet has the lowest coefficient of friction of all known solid materials, PTFE is a self-lubricating material that provides a low friction coefficient, and is ideally suited for the manufacture of corrosion- resistant gaskets & seals.

The Rotary Shaft Seal is  used for excluding dirt, dust, water or other particles, while retaining lubricant in rotary shaft equipment. It was developed as a means of protecting bearings of rotating shafts. The area between the sealing edge and the shaft is most important. The sealing effect is achieved by preloading the sealing lip making its internal diameter slightly smaller than the shaft diameter.  The garter spring ensures constant force to the shaft, flattening the sealing edge to a defined width. Oil seals prevent internal system fluids from leaking and keep external contamination from entering the system. Leakage and/ or contaminants paths occur between the shaft and the seal lip and between the seal and the housing. Oil seals need to seal both dynamically (on the shaft) and statically (on the outer diameter of the seal).

Description Urethane Rods are made of tough, crack-resistant, and abrasion-resistant polyurethane, which lasts significantly longer than conventional rubbers and plastics. Superior Cost Advantage and performance has led to many instances of replacing metal , rubber , wood and Plasting with Elastomer . Application & Usage Urethane rods are a versatile product well suited for machining into custom items for various applications. They range from slip-on roll coverings, to spacers and gaskets, to punch strippers, to machined prototype parts Materials Used Polyester, Polyether

Our organization is engaged in offering Plastic Welding Rods that are fabricated using best grades of raw materials procured from reliable sources. These rods are in high demand all across the globe for their high performance, high efficiency and wide functionalities. These are designed to perfection and are stringently checked by our team of quality controllers who ensure that the best and flawless gamut is delivered to the market. We are offering these welding rods at market leading prices.

We leverage on our wide industrial expertise in the fabrication of an exclusive range of PTFE products that are widely used in hot and cold rolling mills. These are widely appreciated for durability, quality, high performance and low maintenance and are rigorously tested as per international standards. PTFE-Teflon Rods, PTFE Teflon Sheets We manufacture high quality PTFE-Teflon rods, bushes, PTFE tubes and PTFE sheets for different requirements of our clients. Superior in quality, these products are known for their durability and performance and are available with following specifications.   Bushes Specifications   O.D: 32-150mm (standard) I.D: 12.5-127mm (standard) Length: 100mm (standard) upto 300mm in special cases We can also supply larger sizes on request   Rods Specifications   Dia: 3mm-400mm (standard) Length: 300mm-1000mm (standard)   PTFE Sheets Specifications   Sizes available: 300 x 300mm to 1000 x 1000mm Thickness: 0.1-50mm Thickness sheets available on request PTFE-Filler also   PTFE Thin Sheets Specifications   Width: 300mm, 600mm, 1000mm Thickness: 0.1-3mm Thin sheets are available in roll form or cut to length form Available in roll form or length cut to request  

Oil seals and grease seals have a flexible lip that rubs against a shaft or housing to prevent the leakage or ingress of fluids and dirt. Oil and grease seals are used to retain or separate lubricants or fluids. These seals are primarily used for rotary applications only. For proper installation, the seal lip should point towards the medium being contained. Some oil seals and grease seals have a spring to help keep the lip in contact with the shaft. Other types of oil seals and grease seals include:• Single lip oil seals• Double lip oil seals• Metal cased• All rubber or polymer• Internal orientation• External orientation• Axial orientation• Spring-energized

We leverage on our wide industrial expertise in the fabrication of an exclusive range of PTFE products that are widely used in hot and cold rolling mills. These are widely appreciated for durability, quality, high performance and low maintenance and are rigorously tested as per international standards. PTFE-Teflon Rods, PTFE Teflon Sheets We manufacture high quality PTFE-Teflon rods, bushes, PTFE tubes and PTFE sheets for different requirements of our clients. Superior in quality, these products are known for their durability and performance and are available with following specifications. Bushes Specifications O.D: 32-150mm (standard) I.D: 12.5-127mm (standard) Length: 100mm (standard) upto 300mm in special cases We can also supply larger sizes on request