Back Back
air ejector
Get Price Quote
The efficiency of a Steam-turbine is mainly determined by the pressure of the steam at its outlet. The Turbine Surface Condenser is therefore maintained under vacuum. To enable this, the Steam Jet Ejector Vacuum System must be capable of removing all non condensable and associated water vapour from the Surface Condenser to produce the minimum steam condensing pressure consistent with physical dimensions and heat transfer and to provide for deaeration of the condensate. Usually, the SJAE system is of Twin Element type i.e. of duplex design having two identical Ejectors per stage, one of which, being in operation at any one time and the other as stand-by. The Inter and After Condensers are generally Single Element type, The System also includes a Hogger Start-up Ejector with Silencer for fast pre evacuation and which is in operation only till the desired vacuum has been achieved. Thereafter, the two stage holding ejectors take over.
Pneumatic Hand Pump
20,000 - 25,000 Per Piece
Best Deals from Pneumatic Pumps
aquarium air pump
350 Per Piece
5 Piece (MOQ)
Pneumatic Grease Pump
Get Price Quote
We are engaged in offering a wide range Pneumatic Grease Pumps (For Grease / Oil spray). Manufactured in compliance with all the international quality standards, these products are durable, abrasive & corrosion resistant, and dimensionally accurate. These pumps are extensively used in applications related to grease or oil spray because of their accurate dispensing and good repeatability.
Air Operated Diaphragm Pump
Get Price Quote
Pneumatic Barrel Pump
36,000 Per Piece
1 Piece (MOQ)
Pneumatic Hand Pump
18,000 Per Piece
1 Piece (MOQ)
Air Operated Diaphragm Pump
Get Price Quote
We are engaged in manufacturing, exporting and supplying of highly efficient Air Operated Diaphragm Pump. We are fabricating Air Operated Diaphragm Pump using high quality materials. Our Air Operated Diaphragm Pump is highly resistance and easily adjusted to the air pressure. This Air Operated Diaphragm Pump assures efficient performance and its long life. Our Air Operated Diaphragm Pump is available at affordable price range.
Air Pressure Pump
625 Per Piece
Air Cooled Diffusion Pump
25,000 Per Piece
1 Piece(s) (MOQ)
We do not have to worry about stock-out situations and undertaking bulk orders, as are facilitated by a large storage facility. It has the latest inventory management software that helps us to maintain year around availability of the products. We are appreciated amidst the celebrated names in the sphere of providing exclusive range that includes Air Cooled Diffusion Pump. Features : Resistant to corrosion Sturdiness Durable design
Pneumatic Grease Pump
20,000 - 25,000 Per Pair
1 Pair (MOQ)
Industrial Air Pumps
6,000 Per
Pneumatic Submersible Pump (SP10)
Get Price Quote
The company is the well- known Pneumatic Submersible Pump (SP10) Importer and Supplier in India. Our Pneumatic Submersible Pump (SP10) is available at the most competitive prices. Specifications Net Weight21.5 KgsHeight340 MMMinimum OpeningPump Will Enter240 Mm X 230 MMAir Inlet¾" NptAir Outlet1" BsppAir Consumption2.7 M3min.RecommendedHose Size12 Mm (12")Fluid InletscreenFluid Outlet2" NPT
Air Operated Diaphragm Pump
Get Price Quote
Air Operated Piston Pump
Get Price Quote
Pneumatic Hand Pump
Get Price Quote
• Compact, Light Weight, Hand Operated • Combined Vacuum & Low Pressure Pump with Pressure / Vacuum Changeover option • Generation (Range) of : Pressure Upto 2 Bar; Vacuum Upto 0.9 Bar • High Sensitivity / ResolutionFine Adjustment Vernier with built-in Volume Chamber to realizeHigh Resolution / Sensitivity of around 0.05 mBar (0.5 mmWC) • Very Low Leakage rate • Flexible Nylon Hose (1 Meter) with Swivel Adaptor to connect devices under test • Test Connection Port : 1/4″ (F) BSPGauge / Indicator Connection Port : 3/8” (F) BSP
Air Cooled Thermic Fluid Pumps
Get Price Quote
Heat transfer installations have achieved a high level of technical development. Consequently the requirements on pumps handling heat transfer oils have increased regarding to operating safety, environmental protection, maintenance and operating costs. The FLOWLINE FAC Series of pumps are specially designed , based on many years of experience and on the latest technical know-how, fully complies with these requirements Advantages Flowline provides pumping solutions which permit customers to continuously improve productivity, profitability and pumping system reliability. No need for external auxiliary cooling or expensive Mechanical seal. Excellent price – Performance ratio. State-of-the-art hydraulics. Reduced energy consumption, optimized spare parts concept and service-friendly design. Sturdy Mechanical design with stiffening ribs. Safety gland packing is provided to prevent contamination from entering the journal bearing and minimize the leakage in case of Mechanical Seal failure. No need for external cooling ensures environmentally friendly use of resources. Back pull out design ensures quick and easy maintenance. Large mechanical seal reservoir ensures adequate lubrication to the mechanical seal.
Air Operated Piston Pump
Get Price Quote
air diaphragm pump
90,000 Per Piece
Air Pump
29,120 Per Piece
DESCRIPTION REVIEWS (0) PRODUCT DESCRIPTION HiBlow Air pumps are the most successful company making air pump for large aquariums/fish rooms/ponds, anything big enough means Hiblow. These pumps are made in Japan and are very reliable, you can vouch for it and rely on it. Almost all fish breeders including us at Aquascaping® use HiBlow for our huge aquaria and fish rooms. Durability:The vibrating part has the construction that an actuating rod supported by two special synthetic rubber diaphragms vibrates laterally and this allows long-term continuous operation. No lubrication:There is no sliding portion between moving parts so that no lubrication is required and the exhausted air is always clean. High efficiency:Owing to the electromagnetic vibration construction which eliminates sliding parts, “HIBLOW” pump realizes lower power consumption and high performance. Compact and powerful:“HIBLOW” air pump employs perfectly-balanced vibration mechanism using two electromagnets, one in the front and the other in the rear. This mechanism allows compact size and powerful device. Low noise:Soundproofing construction from the viewpoint of air circuit and vibration is the key factor in the design of pump and “HIBLOW” pump has exceptionally quiet soud level. Smooth air flow:Because the exhaust air volume is very constant and there is less pulsation, “HIBLOW” pump is suitable for the application which requires consistent air pressure and supply. Simple maintenance:“HIBLOW” pump shall be used for longer period with maintenance free, however, replacement of the parts can easily be done by modular type of parts in case that diaphragm might be broken. Specifications: Rated voltage – 220-240 V Power supply frequency – 50 to 60 Hz Power consumption – 250 w Rated loading pressure – 17.7 kpa Rated volume – 80 l/min Weight – 9 kg What’s in the box ? 1 x Air pump Note: 1. We will provide spare parts of all Hiblow pumps, we also repair Hiblow pumps. 2. Since this is a heavy product we ship it via surface courier, which will take additional 2-3 days to reach you. WARNING1. Ensure the rated voltage is corrected2. Do not place the pump where it might come into contact with liquids3. Near flammable or other dangerous materials or objects4. Use only to pump air5. Do not immerse in water
pneumatic metering pumps
Get Price Quote
Pneumatic Metering Pumps are operated by compressed air, nitrogen or natural gas. As there is no electrical component involved in these pumps, they are very safe to operate in hazardous areas. It is compact in size and easy to maintain. The pneumatically operated positive displacement metering pumps can provide accuracies upto +/-2% satisfying API-675 standards. Flow Turn Down Ratio : Since metering pumps offer both stroke rate and stroke length adjustment, flow turn down ratios as great as 100:1 can be achieved. Pressure : These pumps can produce 10,000psi with only 100psi of air/gas supply pressure owing to the large differences in area between the air/gas piston and the plunger. Corrosion resistance: Plungers made of SS316 or ceramic with PTFE seals provide maximum corrosion resistance. Special materials such as Hastolly are also offered.
Air Operated Diaphragm Pump
50,000 - 70,000 Per Piece
aquarium air pumps
75 - 10,500 Per Piece
Pneumatic Diaphragm Pump
Get Price Quote
The pneumatic diaphragm metering pump consists of a liquid chamber and an air chamber separated by a diaphragm. In the liquid chamber, the suction (inlet) and discharge (outlet) ports have check valves that control the direction of the fluid flow. A pipe nipple connects the controller to the pump air chamber. In the air chamber, the airgas power supply from the controller enters and exhausts through the pipe nipple connector. When the controller exhausts the airgas supply, the liquid suction pressure and the return spring force the diaphragm backwards. The diaphragm stops when the end of the diaphragm stem, which is attached to the air chamber side of the diaphragm, collides with the end of the stroke adjuster.
Air Operated Hydraulic Pump
Get Price Quote
air operated grease pumps
Get Price Quote
Our Air Operated Grease Pumps can be used for greasing cars, Trucks, Lorries and Buses in the Greasing Nipples.
Hydro Pneumatic Pump
100,000 - 1,000,000 Per Piece
air diaphragm pump
90,000 Per Piece
Pneumatic Submersible pumps
31,890 Per Piece
Air Pressure Pump
Get Price Quote
To furnish diverse requirements of our clients in best possible manner we are offering an ample range of Air Pressure Pump. These have rugged construction and are well known for their trouble free performance. These are widely used invarious machines and are also available in various technical specifications also. Moreover, we offer these in market very economical prices.Features>> Dimensional accuracy>> Interchangeable parts>> High load bearing capacity
Filter by Localities
