Power Controllers Dealers in Ekkaduthangal, Chennai

• Features: Compact design, Longer service life, Trouble free performance

• Control Input: Current DC 4-20mA.
• Contact: Zero Voltage
• Output Voltage: 97% minimum. 50/60Hz of InputVoltage
• Control Mode: Phase Angle
• Possible Load: All Resistance Load Transformer Primary
• Current Rating: 35A,50A, 80A, 100A, 120A, 150A, 200A, 250A, 500A
• Voltage Range: 100, 220, 380, 415, 440, 460V AC-50 / 60Hz

Features » Micro-Controller based» Digital Display & keys» All types of protective functions» RS 485 interface» Operation by remote control» Compact sizeSpecifications:

We are pleased to introduce ourselves as the leading supplier of the above product, which is used to maintain the Power Factor (PF) above a specified limit. ELITE APFC Panel has a Micro-controller based Programmable Controller, which switches the Capacitor banks of suitable capacity Automatically, in multiple stages by directly reading the reactive load (RKVA) which works in the Principle of VAR Sensing, tends to maintain the PF to 0.99 Lag. The capacitor banks may be selected in number of stages as 4/6/8 according to the load pattern. The TNEB is installing the Digital Electronic Energy Meters for Power and Welding Service consumers having 25HP and above, which has the provision of showing the PF and insisting to maintain the average Power Factor above 0.85 Lag.   Install ELITE APFC Panel to avoid penalties and enjoy the benefits automatically.   WHAT IS POWER FACTOR (PF)? Power Factor is the ratio between the energy drawings (KVA) and the effective energy utilized (KW) i.e., PF=KW/KVA   WHY POWER FACTOR MUST BE MAINTAINED? By maintaining a better PF we can reduce the energy drawn (KVA), thus reducing the current passing through the electrical circuits to the maximum extent possible (even up to 50%) thereby reducing the down time, reduction in heat losses in turn increases the life of the equipment. Otherwise, for every reduction of 0.01 from 0.85 up to 0.75 PENALTY is 1% and below 0.75 it is 1.5% from 0.85 of the Current Consumption Charges (KWh) on your Electric Bill. INCENTIVE is also given by the Electricity Board when the PF is maintained above 0.90 @ 0.5 % for every increment of 0.01 on your Electric Bill.   HOW TO MAINTAIN THE POWER FACTOR? According to the load pattern, proper Capacity of Capacitors to be connected. The value of the capacitors to be connected will vary with respect to the load and its existing PF. There are two ways to maintain PF 1. Fixing the capacitors permanently at the load end or at the mains, generally which is recommended for the fixed loads like Pumps, fans etc., and it is not possible for the loads which have variations in the load and PF. 2. The Power Factor can be maintained by installing ELITE AUTOMATIC POWER FACTOR CONTROL PANEL.   ELITE Controller displays the following parameters. Voltage: R, Y & B Phases, Amps: R, Y & B Phases Present KILOWATT (utilizing current) Present RKVA demand (Required capacitors to attain UNITY power factor) Present KVA (drawing current),Present Power Factor (PF normally 0.99lag) No. of capacitor Banks ON or OFF,Provision to indicate Imbalance load Provision to indicate the change in phase sequence AEE’s PF Controller has built-in protections for High voltage cut-off AEE’s PF Controller has built-in protections for Low voltage cut-off The values and stages can be made as per customer’s request Higher Capacity Panels up to 450 KVAR can be supplied against Order IMPORTANT BENEFITS FOR INSTALLING FOR ELITE AUTOMATIC POWER FACTOR CONTROL PANEL Fully Automatic, no Manual Interventions is required. HEAVY Power Factor PENALTIES on the consumptions are ELIMINATED. INCENTIVES are received on every payment made. Optimize the capacity by reducing the maximum demand KVA. Avoids excess demand charges. Considerable REDUCTION in consumptions (KWH) charges. Improvement in line voltages. Excess Drawing of power is absolutely ELIMINATED. Reduced line current losses and cable overheat. Enhanced life of electrical circuits. Avoids overloading of Distribution Transformers. Additional service connections in existing generation of power by reducing energy losses. Reduced line losses benefits SEB’s and Nation. Avail DEPRECIATION as per Income Tax Depreciation Schedule. OUR PANEL COMPRISES OF VAR SENSING CONTROLLER with LCD display to show all the line parameters. 3 Nos of C.V.T’s (Current Voltage Transducers) of ratio 1:400 CAPACITORS of SIEMENS – EPCOS make – MPP type – 440 V / 50 HZ – Delta connected CONTACTORS to switch in & switch out the capacitors of ABB / SCHNEIDER/BCH make fixed individually to all the stage capacitors at 440 V / 230 V AC coil. MCB/ 3 Pole as Incomer of ABB / SCHNEIDER make. Provision of INDUCTOR COIL individually to all the capacitors to cater the in- rush currents. To Maintain the OPTIMUM POWER FACTOR load balancing to be Carried out in your Premises compulsorily. After providing our APFC panel the readings of KWH, KVAH, Pr.PF, Avg.PF from the EB meter has to be given to our office once in a week to monitor the improvement of PF.  

Fotek Thyristor controller is having CE certified in compact version, i think we are the most advance product which has CE in thyristor & power regulator apart from this we have We are dealing wide range of products in Fotek India proximity sensor, photoelectric sensor, ssr, relays, light curtain, temperature controller, thyristor controller, timers etc.

Electrical Control Panels, Industrial Control Panels

power saving micro processor controllers

automatic power factor controllers, Uninterruptible Power Supply, Inverter

Automatic Power Factor Controller, Ups, Inverters, Stabilizers