Pressure Pump Dealers in Chennai

• Features: Dimensional accuracy,Interchangeable parts,High load bearing capacity

Car washing Pump for personal and industrial cleaning, we suggest a high pressure cleaning system. Comparing to other ordinary car washers our high pressure pump has high impact pressure which removes the dirt adhered in the vehicles with less consumption of water with high pressure, we have the solution to finish a large surface area with high pressure wash in a short span of time. Hydrojet car wash comes with the latest state of High-tech technology and includes standard accessories for cleaning effectively. The high pressure pump comes with a trolley and skid mounted assembly. A vehicle should be washed down every two to three weeks. Weather factors such as heat, cold, salt air, exposure to sun and acid rain can ruin the look and paint on your vehicle. We suggest washing your vehicle at regular intervals on rainy seasons. It is easier to clean your car or truck by using high pressure pump. But however, the salt can cause enormous amounts of damage to your car's chassis and engine. With high pressure washers, you can spray off the dirt and salt that accumulates at the surface and the bottom of your car in a quick and precise manner.

• Type: Booster Pump
• Application: Water Purification
• Weight: 2
• Voltage: 24v
• Condition: New
• Power: 0.3
• Driven Type: Electric
• Pressure: High Pressure
• Warranty: 1year
• Country of Origin: India
• Brand Name: Meritflow

• Application: Sewage
• Driven Type: Battery Operated ,Electric, Fuel, Hydraulic, Oil, Pneumatic
• Condition: New,Old
• Color: Grey , Silver
• Voltage: 110V, 220V, 280V,380V, 440V
• Pressure: High Pressure , Low Pressure, Medium Pressure
• Weight: 100-200kg, 200-300kg
•  OtherAutomatic Grade: Semi-Automatic, Fully Automatic, Manually Automatic

Newton Reciprocating Hi-Pressure Pumps utilise the large area of Air-drive piston directly connected to a small-area pumping piston to produce low cost hydraulic power from available shop air. These Hi- Pressure pumps are powered and controlled by compressed air supply, and require no electrical connections. Their compact size, and ability to perform

• Brand Name: E-chen Original 24 Dc Motor
• Power: 24
• Pressure: 180psi Maximum
• Application: R.o.System
• Voltage: 24V DC
• Working Pressure: 130-180 PSI
• Type: Ro Booster Pump
• Weight: 2.2KG
• Structure: Steel
• Warranty: 1year, Direct Manufacturing Watrenty
• Country of Origin: China

• Application: Water Pump
• Application: Agriculture, Industry, Household

70kg/cm2 includes Hose , Pressure Guage

• Color: Light White
• Condition: New
• Automatic Grade: Manual
• Application: Washing Car
• Type: Car Washing Pump
• Weight: 20-40kg
• Warranty: 5years
• Country of Origin: SA

Portable Mobile Car wash cart - 

Compact, Light Weight, Hand Operated • Combined Vacuum & Pressure Pump with Pressure Vacuum Changeover option • Generation (Range) of : Pressure upto 60 bar; Vacuum upto 0.9 Bar Fine Adjustment Vernier to realize upto 1 mBar Resolution Sensitivity • Very Low Leakage rate • Flexible Nylon Hose (1 Meter) with Swivel Adaptor to connect devices under test • Test Connection Port : 14″ (F) BSP Gauge Indicator Connection Port : 38” (F) BSP

• Brand Name: TOHATSU
• Power: 44 KW
• Pressure: High Pressure
• Type: Single Suction, Single Stage, High Pressure Turbine Pump
• Weight: 80-120kg
• Color: Red
• Power Source: Fuel
• Operating Type: Automatic
• Usage: Home, Agricultural Industry, Automobile Industry, FIRE FIGHTING,
• Type Of End Use: Industrial
• Max Flow Rate: Pump performance 2050 liter / min. at 6Bar /1800 liter min. at 8Bar/ 1500 liter / min. at 10Bar

Features Compact and light weight Adjustable outlet pressure for different applications Corrosion – Resistant stainless steel valves All working parts, connecting rod, crankshaft and bearing are lubricated by oil bath   Applications Automobile workshops Service Stations Industrial Boiler Feed Food processing industries Cattle farms Pharmaceutical industries etc,

• Brand Name: Grundfos
• Application: Single water pressure booster pump
• Fuel: Eletric
• Application: Domestic/Commerical
• Pressure: 3 to 5.5bar
• Model Number: CM 5-5 with 60Ltrs pressure tank
• Place of Origin: India

We are offering grundfos pressure pumps overview the most robust pump designed ever for water pressure boosting it was once said that great things come in small packages. When you meet the grundfos cm booster pump for the first time, you’ll certainly agree. This horizontal multi-stage pump has been created with compactness and modularity as two of its central features. Add reliability and quiet operation to the mix, and another innovative pump solution from grundfos is born. Centrifugal modular. The pump is basically composed of a series of interchangeable modules, all of which have been designed to work together seamlessly, no matter the application applications: cm pump with pressure controller is used for constant water pressure. Can be ideal when space is constraint near overhead tank. It also has dry running protection, incase of no water in the pipeline. Cm pump is also supplied with pressure tank for constant water pressure. When the pressure drops to the pre-set level, the pump will start-up and when the water consumption drops again, the outlet pressure will rise to a pre-set stop pressure after which the pump will stop. Available from 8 lts to 100 lts tank range. features: liquid temperature from 20°c upto 120°c built-in thermal protection f class installation 80 start stop per hour construction: electro-coated cast iron parts - free from corrosion high efficient motor horizontal multistage centrifugal pump long life components are of corrosion and wear resistance stainless steel benefits • highly reliable • compact design and silent operation • wide performance range

• Type: Ro Booster Pump
• Application: Ro Use
• Weight: 10-20kg
• Voltage: 24V DC
• Condition: New
• Power: 0.5
• Driven Type: Electric
• Pressure: High Pressure
• Warranty: 2years
• Certifications: CE Certified
• Brand Name: TESLAIPS
• Voltage: 24V
• Working Pressure: 100 GPD

Canadian Clear has a state of art Anion, Canion and Softner resins of high quality to cater to the various needs of the water treatment equipments for softening, demineralizing and mixed-bed.Canadian Clear has successfully designed, manufactured, installed and commissioned a number of pumps with State of Art technical know-how to prime industries, fertilizers, hospitals, government and semi-government organizations, off-shore oil rigs, refineries, soft drinks manufacturers, breweries and mineral water manufacturers for various applications. Vertical High-pressure In-line Pumps 50/60 Hz CP pumps are employed for general water supply, sprinkling, irrigation and pressure boosting duties for hot and cooling water re-circulation and condensate transport. They are installed in boiler feed circuits, domestic water supply systems, washing plants and filter systems used for fire fighting also. Design : Multi-stage, vertical high-pressure centrifugal pumps, with suction and discharge of identical nominal diameters arranged opposite to each other(in-line design).Bearings : All vertical Centrifugal pumps are supplied with tungsten carbide plain bearing at the hydraulic rotor.Shaft Seal : Cartridge type single mechanical seal.Drive : Electric motor, 50/60 Hz, air-cooled, 2 pole, standard motor other motor makes subject to prior consultation - Single-phase A.C motor, frequency-controlled drives(on request).

Based on new technologies and modern machines, we are engaged in offering a wide range of High Pressure Pumps. These products are noiseless and needs low power consumption. A team of skilled engineers and efficient workers manufacture these products and ensure long lasting service life. We are offering these products at economical rates. Features: Effective performance Long lasting Varied specifications

We hold expertise in offering a wide range of Electric Booster Pumps. These are ergonomically engineered by one of the experienced manufacturers of the industry. Robustly constructed by our vendors these pumps are acclaimed for their rugged construction, high functional efficiency and durable performance. Our pumps are widely used for easy gas transfer and acclaimed for their longer service life and optimum performance. Features: Easy gas transfer Rust-proof nature

• Features: Compact design, Long working life, Easy to install
• Motor Horsepower: 0.5 to 10 HP
• Motor Phase: Three Phase
• Head: 50 m Max.
• Frequency: 50-60 Hz
• Brand Name: Massflow Engineers
• Material: Stainless Steel
• Pump Size: 0.5 to 3 inch
• Material Grade: Available in 316,304
• Flow Rate: 10 to 600 LPM

Feet provide the primary surface of interaction with the environment during locomotion. Thus, it is important to diagnose foot problems at an early stage for injury prevention, risk management and general wellbeing. Although plantar pressure data have been recognized as an important element in the assessment of clients with diabetes and peripheral neuropathy, information derived from plantar pressure data also can assist in determining and managing the impairments associated with various musculoskeletal and neurological disorders. Plantar pressure measurement systems identify and quantify areas of high pressure, helping you diagnose the root cause of lower extremity problems and design more effective offloading devices.The Foot Scanner Podiascan system provides podiatrist and biomechanists with an economical and efficient method to measure static / dynamic plantar foot pressure distribution. The Footscan Podiascan system produces instantaneous and permanent high resolution image of the pressure distribution across the plantar surface. The Foot Scan system Podiascan consist of a Harris mat / Foot Imprinter model FM1111, Windows based image analysis software and patient reporting software. HP make Scanner copier printer model HP 2050 series or equivalent is an optional item. By using our Harris mat in conjunction with scanner and image analysis software, the system produces an enhanced full colour representation of the sole of the foot. We introduced this Original concept in India as early as 2005.Features : Uses Foot Imprinter recording paper Low cost device Software supports Windows Xp, 7, 8 and 10 operated computer Footwear measurement can be entered in the software ABI, VPT, MF scores and measurements can be added in the report Software converts even a very light image without dropping the image Export in pdf option Patient report can be directly emailed from software to a footwear supplier Data backestore Original design Diagnostic uses include : Identifying areas of potential ulceration Pre and Post surgical evaluation Determining the degree of pronation and supination Screening diabetics and other neuropathy patients Monitoring regenerative foot disorders Determination of orthotic efficacy PODIASCAN system is supplied with Foot Imprinter Harris Mat(with accessories), An interface box to computer, A licensed software with hardlock to capture and convert the gray scale image inot a multi color scale and generates a patient report.Product Code : Podiascan

• Certification: CE Certified
• Color: Silver
• Voltage: 220V
• Condition: New
• Automatic Grade: Automatic
• Power: 1-3kw

FEATURES Booster capacity range: 200 m3/hr to 2880 m3/hr Very low clearance between lobes and housing ensures better performance Better metallurgy ensures negligible expansion under heat Unique design and rugged construction ensures high reliability Significantly higher pump life Constant performance throughout pump life Option of automation with pressure switches and bypass conduit for optimum performance High quality materials used for seals and elastomers   Applications ROOTS can be used in combination with any roughing pump like Oil sealed pump, Oil Lubricated Vacuum pump, Liquid Ring Vacuum pumps or Piston Pump to increase the overall pumping capacity and Ultimate pressure achieved.

• Country of Origin: India
• Type: High Pressure Pumps
• Application: Industrial
• Weight: 10-20kg
• Voltage: 220V, 380V
• Driven Type: Electric
• Pressure: High Pressure

Plunger pumps are positive displacement pumps that" displace" a given amount of fluid on each cycle stroke of operation .The reciprocating motion of a plunger, with a ball check valves on each side of the pump body, creates the pumping action. Pumps can be offered in simplex, duplex or multiple heads for handling different chemicals with common motor. Each head has independent connection and the capacity of head can also be independently adjustable. They can be single acting or double acting. Plunger Pumps are reciprocating positive displacement pumps which are generally configured in four ways: direct-acting or indirect-acting; simplex or duplex; single-acting or double-acting; and power pumps.

• Condition: New
• Brand Name: ULTRAMAX
• After-sales Service Provided: No overseas service provided
• Place of Origin: Tamil Nadu, India

• Country of Origin: Made in India
• Brand: FTT PUMPS
• Material: MOC SS304 & SS316
• Motor Phase: SINGLE PHASE AND THREE PHASE
• Usage/Application: RO APPLICATION
• Temperature: UPTO 120 DEGREE

ASN Hydro Systems India Pvt Ltd is the leading supplier of high and ultra-high pressure pumps; we also manufacture high and ultra-high pressure pump units and a wide range of water jetting accessories including nozzles, water blasting guns, sewer cleaning nozzles, tube cleaning nozzles, humidification & fogging nozzles, process pumps and much more. ASN Hydro Systems India Pvt Ltd offers hot and cold water high pressure pumps. Choose from our wide range of models and select the right high pressure pump for the appropriate application. We design and manufacture as per the custom requirement, especially for industrial heavy duty high pressure application for power and process industries. We also supply for automobile, commercial and industrial cleaning contracting businesses. This is your one-stop organisation and the right place with advice and many valuable tips. We will help you choose the right model to suit your particular needs and application.

• Condition: New
• Power Source: Electric
• Automation Grade: Automatic
• Brand: Oasis Water Systems
• Usage/Application: Water treatment

FEATURES Slow Speed Self Priming Pumps High Grade Oast Iron / Aluminium Housing Gun Metal Impellers Application Domestic Water Use Deeper Suction Water Circulation Instruciton An Arrow cast on the pump casing indicates the direction of rotation. The pump casing to be filled with water before initial starting. INI ever run the unit with gate valve closed. To avoid rust formation in the pump casing, RUN the unit for a few minutes daily

• Brand: Netzsch
• Head: 72 Bar
• Model: NEMO
• Max Flow Rate: 1000 m3/hr
• Design Type: Positive Displacement Pumps
• Color: Silver

Application SCALA2 is designed for pressure boosting in single family houses and apartments. Boosting from mains: Increases the water pressure delivered by city mains. Boosting from tanks: Increases water pressure from roof tanks, break tanks and ground tanks, including rainwater tanks. Boosting from wells: Pumps water from a depth of up to 26 feet (8 meters). Indoor and outdoor installation: NEMA 3 Perfect water pressure: Intelligent pump control adjusts operation to ensure perfect water pressure at all times. Low noise: With a noise level of 47 dB(A) in typical use, SCALA2 is one of the quietest boosters in its class. Easy selection: One variant for all domestic applications. Easy installation: Compact, all-in-one solution for perfect installation in no time. Easy to operate: User-friendly control panel for easy set-up.

• Motor Phase: Single Phase
• Power: 0.75 KW
• Number Of Stages: Multi Stage Pump
• Brand: Crompton
• Voltage Band: 180-240
• Inlet Size: 32 mm
• Discharge Range: 1.0-3.5 LPM
• Head Range: 59-33 m
• Outlet Size: 32 mm