Process Control Equipment Dealers in Periyar Nagar, Chennai

• Brand Name: Mitsubishi
• Power: 240 V AC, 24 V DC
• Communication Port: USB
• Expansions: yes
• Max I O Points: 128
• Mounting Type: Rail
• PLC Brand: MITSUBISHI
• Place Of Origin: Japan
• Warranty: 1 Year
• Expansion: Yes
• Mini I O: 24/16

• Supports for all types (any HP & any Capacity) of THREE PHASE m: Has additional features of Auto mode, Manual Mode, Timer options.
• User can operate the motor pump from anywhere in the world through CALL / SMS / Android app. Live status of Motor ON and Motor OFF. SMS alerts for manual motor on/ manual motor OFF, line fault, dry ru: Enable access to 5 authorized users. Microcontroller based advanced embedded technology. Easy to install. Easy to operate.

Due to repeated requests from our customers, we have introduced this advanced model of GSM mobile motor starter. This product is very much different than other products in market and we proudly say that we are giving best quality and best rate than other vendors. That too with all protective features. Our main objective is to facilitate the hardworking farmers and their families with this product. Our GSM Pump Controllers (Mobile Pump Starter) are most unique and specially designed for farmers as said above, for agriculturists and industries to operate and monitor remotely located submersible pumps and motors. They can switch ON and switch OFF the motor pumps from their homes or anywhere by using a SMS / CALL / Android Application. It also saves water, time and electricity. Our GSM based mobile pump controller are manufactured with advanced embedded micro controller technology and quality process. This advanced model GSM has the below features:- -->Single Phase Failure - Controller will not switch on the motor, if any one of the phase fails. -->Phase Reverse / Phase Sequence Fail - If the sequence of three phase is changed, then the Controller will not switch on the motor. -->Phase Imbalance / Unbalance / LH Voltage - If one or more of the line-to-line voltages in a three-phase system are mismatched then the controller will not switch on the motor. -->Over Load - If the motor pump draws more current than the set current, then it will protect from overload and switch off the motor. -->Dry run - If the motor pump runs without water, GSM controller will switch off the motor and protects it from dry run. Registered User - The motor pump can be protected from the unauthorized users by enabling this feature through SMS. Timer - The motor pump can be used as scheduled timer / delay timer. This GSM Auto Start will be much useful to you.

We are well supported by a team of experienced personnel who take care of the storage facility ensuring zero damage to the products till the final dispatch of the orders. Our establishment in Chennai(India) is well connected by varied modes of transport. Thus, we are capable of reaching patrons with ease. Our MT20-LPID Fuzzy Temperature Controller is developed with advanced scientific methods and is tested for optimum performance.  

• Throw Type: Double Throw
• Phase: 3 Phase
• Capacitor Banks: 6, 8, 12 Stages

We are supplier and exporter of this product.

• Warranty: 12 months
• Features: Energy efficiency, Excellent performance, Longer service life.
• Sensor voltage: 5 VDC
• Dry run sensing delay: 90 sec
• Item Code: WC001

• Type: Motor Controllers
• Application: Motor Controlling
• Color: Grey, White
• Voltage: 110V, 220V, 380V, 280V
• Automatic Grade: Automatic, Fully Automatic, Semi Automatic
• Body Material: ABS, Mild Steel, PVC
• Power Source: Electric

• Feature: High flow system for faster tank fill and significant water output.

The HT Solar provides water in remote location by converting high voltage direct current (DC) from a solar panel into alternating current (AC) to run a standard AC Submersible motor.This controller is designed to provide these features with the plug and play ease of installation similar to a single-phase control box.The controller attempts to drive the pump & motor to deliver water even under adverse conditions reducing output as necessary to protect the system components from damage and only shutting down in extreme cases. Full operation is restored automatically whenever abnormal conditions subside.Uses MPPT technology to maximize water delivery at various solar energy levels.

• Theory: Temperature Controller
• Model Number: TEMP IND 008
• Place of Origin: India

MP3200iec The MP3200iec controller is the flagship of the MPiec series, offering up to 62 axes of motion control and up to 8 slots for option modules. MP3300iec The MP3300iec controller is the latest installment of the MPiec series. It offers up to 32 axes of motion control and up to 3 slots for option modules. MP2310iec The MP2310iec offers up to 16 axes of motion control and 3 slots for option modules. MP2300Siec The MP2300Siec is a single option module slot controller that offers up to 16 axes of motion control. MP2600iec The MP2600iec rounds out the MPiec Series by offering a single axis of motion control while combining controller and servo amplifier in one unit.

• grey: red
• grey: red

We offer Sequential Controller for Silo Control Panel. Specification for silo: a. 16 channels as a standard output. Higher or lower number of output channels may be provided. b. on time: 1-9999 milli seconds, off time 1-9999 seconds, pause time from 1sec to 9999 sec. c. display: a high, 8 nos of 7 segment red led display. d. output: 1 no relay contact per channel. All output contacts are rated for 3 amp. @ 230 vac on resistive load. e. operating sequence: the operating sequence of the output load or solenoids is from first to last channel. f. remote start: the remote nc contact provided for sequence to start. g. remote stop: the remote nc contact provided for sequence to stop and all the loads are disconnected. After resuming remote start, the sequence shall resume from the 1st channel. h. channel skip facility: unwanted channel can be skipped through programming. i. manual pulsing: generally timer works in auto mode. Manual pulsing mode is also provided for cleaning the bags one by one in manual mode. The output channel remains on till the pulsing key is released. i. communication facility: rs 485 communication provided (on time, off time and the pause time may be programmed from the distance of 2 kms using rs485.

• Video Output: Composite 1.0V P-P/75Ω
• Operating Temperature: (-10℃
• Dimensions: Φ186(mm) x 234(mm)

Powerful 23x optical zoom, High resolution@540TVL, DayNight (ICR), 2DNR, Auto iris, Auto focus, AWB, AGC, BLC, Max 300°s pan speed, 360° continuous pan rotation, Up to 255 presets, 5 auto scan, 8 tour, 5 pattern, Built-in 21 alarm inout, Support intelligent 3D positioning with DH-SD protocol

• Voltage: 0-400 AND 1200 DEG
• Temperature Range: -200 Degree C to +600 Degree C
• Model Name/Number: JR 72 X 72 AND 96 X 96
• Controller Type: J TYPE/ KTYPE/ RTD
• Input: J,K,T,E,R,PT 100
• Mounting: 48X48 DIN

Medical Display Controllers

plc drive, control, lt switch boards, MCC Panels, switch boards

Plc, Electronic Items, Protocol Converter

Sequence Controller, Maintenance Service

As per customer specificationdrawingconnected temperature ,pressure ,level and flow instrumetns ,sensors quotations based the required details and specifications. We purly tailer made instruments and sensors.

laser measuring instruments, Calibration Test Bench, calibration machine

Electronic Controller, Automatic Face Mask Vending Machine

Electric Motors, Pumps, Float Switch, grundfos pressure pumps

Digital Temperature Controller, DUPLINE HOME AUTOMATION

AC Motor Controller, AHU AIR Handling Unit, amway products, plc drive

Analog Clock Controllers

electronic process control instruments, Scientific Instruments, Sensors

bio filters, HW-303B Filters, Super Bright Light Set, aquarium heaters

PID CONTROLLER, Waveform Generator, Phasemeter, Laser Lock Box

Temperature Controller, AC Drive > MFDDTB3A2 (5KW), Cnc Controller

Temperature Controller, Electronic Liquid Level Controllers

Plc System, factory automation, Sensors

resistor temperature detector