Qmarz Machine Tools Pvt. LTd Ambattur, Chennai, Tamil Nadu

For plain (uninterrupted) or interrupted surface parts Break away gauge arms for crash protection Option of two or more gauge heads in parallel Standard gauging range : from Ø 1.5 mm to Ø 100 / 200 / 300 mm Gauging range without readjustment : ± 12.55 mm on workpiece diameter Repeatability error under standard conditions : < 0.5 μm (each measuring head) Measuring force over entire range of ± 500 μm : 0.75 N ± 10% Gauge arms Pneumatic engagement/disengagement Water proof measuring head

Bowers Ultima Bore Gauge offers a choice of resolutions up to 0.0001mm. Featuring the NEW Bowers ‘FASTFIT’ measuring heads with extended measuring range (above 14mm), the Ultima boasts a simple lever operation and a constant measuring force, ensuring outstanding ease of use and repeatability under laboratory or shop-floor conditions. UKAS certificates standard for all measuring heads and setting rings Measuring Range 2 - 310mm (0.080" - 12.000") Resolution: 0.0001mm (0.00001") Constant spring pressure for improved repeatability Good positive feel as heads self-centre in the bore Bowers Fastfit measuring heads for rapid changeover Ceramic anvils on heads above 12mm Blind-bore measurement standard above 12mm Possible to connect several probe holders to one single readout to measure different bore sizes at one measuring station The complete range of Bowers special heads is available for the Ultima (grooves, threads, splines, deep-bores etc) Depth stops available for all heads Available without digital readout unit (if not required) Alternative Sylvac digital readouts available Interchangeable probe option, to allow use of other manufacturers probes and displays

For plain surface parts Easy fine adjustment Gauging Range : Ø 4 to Ø 70 mm / 40 mm to 160 mm Repeatability : ± 1 m (in standard conditions) Gauge arms retraction (spring action) Standard measuring force : 1 N

The IPX-103/104 is a portable, battery-powered instrument for checking surface roughness, with the measured values displayed on a digital readout display. The instrument can be used in laboratory, inspection area, workshop, or wherever on-site surface roughness testing is required Features: Pocket-sized and economically priced! External and internal finish testing with swivable tracer Ra and Rz parameters in one instrument and all available after each individual test Standard 9V battery Three cut-off 0.25mm, 0.8mm and 2.5mm, adjustable to 1-3-5 times Piëzo-electric pick-up stylus for external surfaces with diamond tip of 2 micron according to the latest ISO standards IPX-104 with data output

Simple to operate, high quality universal surface finish tester Features: Simple but high quality universal roughness tester with excellent price/ quality rating Tester for use in laboratory or production environment Ra and Rz parameters in one instrument and all available after each individual test Multiple styli available; standard delivery with long and short stylus Additional roughness parameters available on request Conforms to international standards ISO, DIN, ASME, JIS

Features: High quality stereo zoom microscope Delivers sharp high contrast images Excellent zoom ratio of 1:6.5 Perfect for industrial inspection and for assembly purposes Easy-view vertical screen. Large stage travel 6" x 10". Rotating chart clips Fibre optic illumination for surface measurement.

Features: Up to 2 metres deep with standard extensions Pneumatic system available from 50mm diameter for depths of up to 15 metres Can be fitted with spacer to allow segments to be measured

Ready-to-test analogue Rockwell type tester with lever system for direct load application Features: Basic regular Rockwell type tester offering accuracy, reliabilityand durability at an extremely affordable price Rugged construction, will stand up to the harshest environments Direct analogue reading of HRC, B, A, F Accuracy conforms to EN-ISO 6508 and ASTM E-18 Mechanical test cycle without the need of electricity Easy load force selection by robust dial knob Oil brake with variable damping by adjustable knob Large capacity to accommodate large test specimen Standard delivery including accessories ready for testing all scales

Features: Uses XT measuring heads Measurement range from 6 - 100mm / 1/4 - 4" Ergonomically designed pistol grip body LCD display unit with rotating display for easy reading at any angle Functions include 2 pre-set memories, tolerance indicator lights and mm / inch conversion RS232 data output facility Self centering measuring heads with tungsten carbide contact points Setting rings provided with each instrument complete with UKAS certification Blind bore measurement on all instruments above 12.5mm / 1/2" Available as individual instruments or boxed sets Diameter above 100mm available on request Prices include setting rings

Single point gauge head for plain or interrupted surface parts Vibration absorption : hydraulic Easy adjustment via dovetail mounting Maximum measuring range + 1500 μm Repeatability 1μm Gauge arm retraction (pneumatic) : 2.5mm from zero position Standard measuring force : 2N Maximum displacement on Z axis : - 4.5 mm Hydraulic gauge slides (various strokes)7 Single point gauge head for plain or interrupted surface parts

For plain (uninterrupted) surface parts High precision measurement of minute diameters Standard adjustment range : from Ø 1.5 mm to Ø 85 mm Measuring force over the entire range ± 250 μm : 1N ± 10% Ingress protection : Ip65 Repeatability :

For plain (uninterrupted) or interrupted surface parts One single standard cable Standard adjustment range : from Ø 4 mm to Ø 85 mm Measuring force over the entire range ± 600 μm : 1 N ± 10% Gauge arms retraction (Pneumatic) : 1 mm* Ingress protection : Ip65 Quick size adjustment via dovetail Repeatability :

Features: Large LCD display 0.01mm or 0.0005" resolution Preset capability Direct Inch/Metric conversion Absolute / Incremental measurements

Designed to work exclusively with Newall's digital readouts, the Spherosyn and Microsyn encoders embody a truly innovative design in which all of the electronics and measuring components are sealed and protected. The encoders carry an IP67 environmental rating and will continue to provide accurate, reliable readings even when fully submersed in water, oil or coolant. No other linear encoder matches the durability and reliability of Newall's reader heads and scales.

The S Series of LVDT Displacement Transducers is the culmination of many years' experience gained from Solartron Metrology's highly successful Mach One range plus careful note of market feedback. The Stainless steel body with improved sealing options of IP65 or IP67, coupled with new polymer guides with rigid carriers, ensure that the transducers keep working accurately and reliably, especially in wet or corrosive conditions. An unusually large bore to core clearance is maintained throughout the range, even on transducers fitted with onboard signal conditioning, enabling easier installation and making the assembly more forgiving of misalignment. Features: 5mm - 300mm measurement range

Features: Digital outside micrometer with 'easy read' large 7.5mm character height, digital display Tapered for easier access to difficult areas Modern design Hammertone finished frame with high quality insulated grip 'Soft keys' for maximum operating comfort Long life guaranteed With tungsten carbide measuring faces and constant force ratchet on thim Functions: mm/inch conversion, tolerance indication, ABS/INC, preset, on/off, zero-setting, data-output, battery low indication Packed in plastic box with standard and adjusting key

Double column indicator height gauge Provided with a hand feed wheel for easy up and down feeding The double column combines high stability with absolute accuracy With carbide tipped scriber Features large 7.5mm height, digital display Solid design 'Soft keys' for maximum operating comfort Ground micro-lapped measuring surfaces Functions: mm/inch conversion, on/off, data-output, zero-setting, max, min, battery low indication Fine adjustable for high precision measurement

Features: 0-25mm/0-1" travel indicator Inch/mm conversion Zero setting at any position Rods connect together for full 550mm capacity Base size: 100mm Includes 2 extra points for small hole applications

Features: Easy to read LCD display Ground micro-lapped measuring surfaces Thumb wheel for fine adjustment Functions: mm/inch conversion,on/off,zero setting, battery low indication SR44 Battery

Handheld coating thickness gauge with F-probe for steel substrates Features: Clear 4 digit segment LCD display Magnetic induction measuring principle Non-magnetic coating on ferrous substrates Easy calibration

The robust new Bowers XTL Lever range is perfect for vertical bore measurement, providing accurate and repeatable bore gauging under inspection department or shop-floor conditions. The XTL has a simple ergonomic action and can be fitted with a wide variety of analogue and digital indicators or even transducer probes. The range can be provided with IP65 rated digital indicators, rendering it resistant to coolant, water and airborne particles. A ‘wireless’ gauge module is also available, enabling cable free communication with remote data collectors, PCs etc. The cost-effective new XTL boasts hardwearing extended travel carbide measuring anvils and is able to measure diameters up to 300mm. Features: Measuring range 6-100mm(diameters above 100 on request) Excellent for vertical bore measurement Simple 2-button operation 3 preset memories RS-232 output Self-centering heads Constant measuring pressure Fast, accurate measurement Resolution 0.001mm (0.00005") Tungsten carbide measuring faces on all 3-point heads from 12.5mm Blind bore measurement above 12.5mm (0.500") Extensions available for deep hole measurement Setting rings included with individual instruments and sets UKAS certificates supplied as standard with all setting rings UKAS certificates supplied with all gauges Serial number on all gauges and measuring heads Heads with special anvils available to suit specific customer requirements (e.g. Threads, grooves, 2-point, spherical, splines etc) Bore gauges manufactured according to DIN 863, part 4

May be used as an active positional locator on CNC machines, or as a touch trigger probe for other types of machines Sense directions ± X, ± Y, -Z Break away safety stylus Maximum displacement on X and Y axes : 14° Maximum displacement on Z axis : - 4.5 mm Trigger force with 30 mm stylus on X and Y axes : 1 N Trigger force on Z axis : 4 N Repeatability (X, Y, Z) at 480 mm/min, with 30 mm stylus : 1 μm Ingress protection : IP67