RFID Reader Dealers in T Nagar, Chennai

This is a great little RFID Reader Module from Innovations, similar to the ID models (the difference being no silicone protection on the back). If you need an inexpensive way to get started with RFID, this is a great little module. Just power the module, and it will read any RFID card within range. It will output the cards ID in a serial string, which can easily be read by any microcontroller or PC with RS-232 interface. The spacing on the pins is 2.54 mm, which means the module will directly fit on a breadboard. T he EM-18 RFID Reader module operating at 125kHz is an inexpensive solution for your RFID based application. The Reader module comes with an on-chip antenna and can be powered up with a 5V power supply. Power-up the module and connect the RS-232 transmit pin of the module to receive pin of your microcontroller using MAX232 converter. Show your card within the reading distance and the card number is thrown at the output. Optionally the module can be configured for also a weigand output. SPECIFICATIONS: Reading Distance: 6-10 cm Frequency:125kHz Compatible Card codes:Manchester64-bit,modules64 Current Rating: 35mA (Max) Operating Voltage:4.6V - 5.4VDC Output:TTL and UART FEATURES: This RFID Reader Module 125Khz is eary to use. It is Low Cost. It gives RS-232 and TTL Output. Need very less external component to drive.

Reindeer’s Mastiff™ Reader is an Active RFID Reader with GSM and GPRS tracking which can be used indoors to track people, vehicles or assets. This is an ideal device to track and monitor students, employees, workers, visitors inside the buildings or outdoors. The reader collects the tag information from the compatible Mastiff™ active RFID tags through its dedicated RFID reader and updates the server through GPRS. Mastiff™ Reader can also be used for Fleet Management, Vehicle Tracking, Wireless Sensor Networking and other Machine to Machine (M2M) applications. It’s a stand-alone device which tracks the location of the vehicle and communicates to the down-stream software in a seamless way. It also measures other performance parameters such as engine status, door status, vehicle speed, tamper status etc. and sends them to the server along with timestamp. Mastiff™ Reader is fitted with fully functional GPS tracker and comes with GSM/GPRS connectivity for downs-stream communications. Besides, it has additional power backup which can maintain continuous uptime for 72 hours when external power is disconnected. It also comes with an additional storage of more than 5 GB which can be used as backup communication failures. Mastiff™ Reader has a robust power supply with surge protection and self-resetting fuse which provides excellent power supply isolation and protects from surges when connected to vehicle ignition or to any external devices. It also has self-healing and self-correcting mechanism which will ensure reliable and continuous operation in the long-run with no manual intervention. The rechargeable backup battery makes the device portable and it comes with complete protection such as reverse polarity protection, surge protection and fuse protection. Mastiff™ Reader is equipped with intelligent sensors and raises alarm when the device is tampered with or on over speeding and sends real-time notifications/alert to back-end software. It’s fitted in a heavy duty ABS material which protects the device from normal wear and tear and comes with a flame rating of UL94-5VA. Mastiff™ Reader comes with a sleek design and carries a host of LEDs indicators for various functionalities such as GSM/GPRS, GPS, Power Supply/Battery Supply, Low Battery Conditions and Tamper Alarms etc. These will be useful during troubleshooting and periodic maintenance. Remote management is another important feature of the Mastiff™ Reader which will help installation and maintenance engineers to cut down their time from site visits. Remote management and maintenance will help the engineers to upgrade the device configuration and settings, identification of alert situations, pinpoint the location of the device and monitor the health status of the device. Mastiff™ Reader also comes with an integrated RFID reader (UHF band) to track the personnel inside the vehicles or to authenticate the drivers to turn ON the ignition and enable automatic door opening and closing. The range of the RFID reader is adjustable and it covers up to 100 meters line of sight. Mastiff™ Reader comes with a small form factor, light-weight and carries an excellent appeal. It complies with standards such as EMI/EMC, FCC and CE making it fully qualified for international deployments with minimum changes.Based on the packet format used for down-stream server communication, there are three versions of Mastiff™ GPRS/GPS Active RFID Reader is available. Applications   Personnel Tracking And Monitoring Asset Tracking Internet Gateway For Wireless Sensor Networks Machine To Machine Communication (M2M) Remote Monitoring Applications Telemetric Applications

• Features: Highly efficient,Long lasting machine life,Highly sensitive sensors,Long range impulse encoders,Fast and efficient AVI

• Type: Rfid Reader
• Condition: New

rfid micro reader, rfid active tag, rfid products, Time Attendance Machine