RFID Reader Dealers in Chennai

• Condition: New
• Frequency: 0-50Hz, 50-100Hz
• Feature: Accuracy, Easy To Use, Electrical Porcelain, Four Times Stronger
• Warranty: 5yrs
• Temperature: High Temperature, Medium Temperature
• Puncture Voltage: 0-50Kw, 100-250Kw

• Transmit Power: +31.5 dBm
• Dimensions: 7.7 x 5.9 x 1.7 in (195.6 x 149.9 x 43.2 mm)

The new FX7500 Fixed RFID Reader introduces advanced RFID radio technology for faster, more accurate read rates and more consistent performance even in challenging environments. The new radio is paired with a more flexible Linux-based network architecture that integrates the tools and openstandard interfaces needed for fast, easy deployment with RFID and back-end applications. The result is a fixed RFID reader that sets a new performance standard — delivering peak performance at all times with excellent reader sensitivity and better interference rejection, at a lower cost per read point.

• Brand Name: CAMS
• Type Of Reader: Card Reader
• Item Code: UNC1
• Identification Method: Card
• Installation Type: USB Connected
• Power Supply: 3-6V

This is a great little RFID Reader Module from Innovations, similar to the ID models (the difference being no silicone protection on the back). If you need an inexpensive way to get started with RFID, this is a great little module. Just power the module, and it will read any RFID card within range. It will output the cards ID in a serial string, which can easily be read by any microcontroller or PC with RS-232 interface. The spacing on the pins is 2.54 mm, which means the module will directly fit on a breadboard. T he EM-18 RFID Reader module operating at 125kHz is an inexpensive solution for your RFID based application. The Reader module comes with an on-chip antenna and can be powered up with a 5V power supply. Power-up the module and connect the RS-232 transmit pin of the module to receive pin of your microcontroller using MAX232 converter. Show your card within the reading distance and the card number is thrown at the output. Optionally the module can be configured for also a weigand output. SPECIFICATIONS: Reading Distance: 6-10 cm Frequency:125kHz Compatible Card codes:Manchester64-bit,modules64 Current Rating: 35mA (Max) Operating Voltage:4.6V - 5.4VDC Output:TTL and UART FEATURES: This RFID Reader Module 125Khz is eary to use. It is Low Cost. It gives RS-232 and TTL Output. Need very less external component to drive.

• Type: Rfid Reader
• Certification: CE Certified
• Color: Ivory, Light Grey, Light Yellow, Yellow
• Condition: New, Old
• Power Type: AC
• Standard: DIN, ETDC
• Feature: Accuracy, Easy To Use, Electrical Porcelain, Four Times Stronger, Proper Working, Sturdy Construction, Superior Finish, Water Proof
• Warranty: 1yr, 2yrs
• Temperature: High Temperature, Low Temperature, Medium Temperature

Reindeer’s Mastiff™ Ethernet Reader is an Active RFID Reader with Ethernet connectivity which can be used indoors to track people and for the access control. This device can be used to track and monitor students, employees, workers, visitors inside the buildings or outdoors. The reader collects the tag information along with the date and time from the compatible Mastiff™ active RFID tags through its dedicated RFID reader and updates the server through Ethernet.The Ethernet Reader has an RTC with battery backup. It also comes with an internal storage to store the tag data along with date and time at which the tag ID is read. The device can store upto 1300 tag records in its internal memory during network failures. Mastiff™ Ethernet Reader operates with 12V/1A DC power supply. The Reader is equipped with relay which is triggered when the tag is read. Relay comes back to normal state after the pre-configured time interval. Server information, RF parameters and other parameters can be configured to the device through its USB port. It’s fitted in a heavy duty ABS material which protects the device from normal wear and tear and comes with a flame rating of UL94-5VA. Mastiff™ Ethernet Reader comes with a sleek design and carries a host of LEDs indicators for various functionalities such as Ethernet Communication, RF, Relay and Power. These will be useful during troubleshooting and periodic maintenance.  The device firmware can be upgraded through its USB port. The range of the RFID reader is adjustable and it covers up to 100 meters line of sight. Mastiff™ Reader comes with a small form factor, light-weight and carries an excellent appeal. It complies with standards such as EMI/EMC, FCC and CE making it fully qualified for international deployments with minimum changes.Based on the protocol used for down-stream server communication, there are two versions of Mastiff™ Ethernet Active RFID Reader is available. Applications   Personnel Tracking And Monitoring Asset Tracking Internet Gateway For Wireless Sensor Networks Boom Barrier Control Remote Monitoring Applications Access Control Applications

• Type: Handheld Rfid Reader
• Color: Ivory, Light Grey, Light Yellow
• Condition: New, Old
• Feature: Accuracy, Easy To Use, Four Times Stronger, Proper Working, Water Proof
• Warranty: 1yr, 2yrs, 5yrs
• Connectivity Type: Wireless

• Type: Rfid Reader
• Condition: New

• Features: Highly efficient,Long lasting machine life,Highly sensitive sensors,Long range impulse encoders,Fast and efficient AVI

• Power Supply: 7.5-12 V
• RF Power: 0-30 dBm
• Reading Tag Time: 10 ms
• Writing Tag Time: 25 ms
• Reading Distance: 6 m
• Working Temprature: -30 to +65 deg C
• Storage Temprature: -45 to +95 deg C
• Fixed Current: 3 A
• Relative Humidity: 5-95 % RH

Strong, all-metal construction and superior throughput for harsh industrial environments! A member of the smartest barcode printer family on the market, the popular PM4i UHF RFID Printer is part of Intermec’s complete line of smart, strong and secure industrial printers.

RFID Readers, Sfc-300 - Biometric Fingerprint Attendance System

Key Features : Read range upto 4m for Portal reader FCC and ETSI compatible Wide frequency range 860-960MHz (EU & FCC) Reads ISO 18000-6C & EPC global Class1 Gen2 Tags Dense reader management with LBT Adjustable output power and AGC Supports Mono-Static and Bi-Static antennas configuration Supports Debug terminal Technical Specifications : Operating Frequency : 860MHz - 960MHz Communication Interface : USB/ UART (option) Supported Protocol : EPC Class1 Gen2, ISO 18000-6C Channel Hopping : 200KHz, 10 Channels - ETSI, 500KHz, 50 Channels – FCC (optional) Read Range : 4m No of Antenna Terminals : 4 Antennas in Mono-static Mode/8 Antennas (4 pairs of Tx/Rx ) in Bi-static Mode Hand Held Reader

RFID Reader, Barcode Scanner, Material Tracking System

RFID Reader, Weighing System, Crane Weighing Scale

RFID Reader, Vehicle Tracking System Services, GPRS Modems

RFID Reader, Asset Management Software, Smart Card Printer, Id Card Printer

Handheld RFID Reader

RFID Reader And Writer, Mini-ITX Motherboard, Resistive Multi-Touch Screens

RFID Readers, Fingerprint Attendance System, Payroll Softwares, CCTV System