Road Marking Paints Dealers in Chennai

• Color: White, Yellow, any color according to user requirement
• Classification: ISO 9001:2008
• Application: Road Marking, Parking Lots, Commercial Markings, Airport Markings
• Brand Name: PRIMELINE
• Other Names: Road marking paint, Thermoplastic Paint, Traffic Marking paint.
• State: POWDER
• Raw Material: Pigment, Binder, Glass beads, Fillers
• Color: White, Yellow, Any color on customer requirement
• Warranty: 18 moths

In compliance with Road Marking Standards, Prime Line is considered as the best commercial grade. This is used in all surfaces and is very effective for city traffic, roads connecting to Highways and for rural urban roads. Prime Line always promises to deliver the best results of Whiteness and brightness. Key Features: ·         Good Reflectivity ·         Quick Drying Time ·         Skid Resistance ·         Cost Effective ·         Eco Friendly

• Brand Name: Berger Shalimar Nippon Paints
• Color: Redish Brown
• Packaging Size: 04 & 20 Litre
• Finish: Matt
• Paint Base Type: Vinyl Antifouling
• Form Of Paint: Liquid

• Brand Name: Berger
• Application: Industrial Use
• Application method: Brush
• State/Form: Liquid
• Application Surface: Metal

• Brand Name: SPECIALITY COATINGS
• Color: Multicolor
• Packaging Type: Container
• State/Form: Solvent
• Surface Of Application: 70 sq.ft
• GST: 18% extra

• Packaging Size: 15 L
• Finish: Semi Gloss
• Packaging Type: Can
• Form Of Paint: Liquid
• Application Method: Brush, Roller or Spray
• Application Surface: Metal
• Brand: Berger
• Paint Base Type: Oil Based Paint
• Shelf Life: 24 months minimum when stored as prescribed in the MSDS
• Flash Point: 38 Degree C
• Is It Anti Corrosion: Anti Corrosion
• Features: Acid Alkali & Heat Resisting
• Storage Information: Store in a cool dry shaded area.

• COLOUR: Grey

ECOANTICORR 1� A Geo Polymer based pre mixed anti-corrosive protective coating formulated to prevent the corrosion. It has excellent bonding strength to steel and all other surfaces comparing to conventional anti corrosive coatings. It forms an excellent corrosion barrier against severe corrosive mediums. ECOANTICORR 1� bonds both Chemically & Mechanically with Steel & Concrete and hence highly durable. It is used in Anticorrosive coating of � Steel Surfaces � Reinforcing bars � Concrete FEATURES � Chloride, Sulphate and Carbon Dioxide Resistant � Acid (>3pH), Alkali and Fire Resistant � Un-matched Bonding to both Steel & Concrete � Quick Setting, No priming and No curing required � Extends the life of structure � Non-Toxic formulation and Contains no VOCs (Volatile Organic Compounds) � Eco-friendly Material (Does not contain resin / epoxy / cement) � Premixed, Easy to use, Just add water TECHNICAL DATA Form Powder Color Grey Mixed Density Around 2.00 Kg/Ltr Final Setting Time (at 30°C) 60 Minutes Bond Strength with Concrete 3 MPa Bond Strength with Steel 5 MPa Compressive Strength 25 MPa Flexural Strength 4 MPa Coverage Average consumption is 1.5 � 2.0 Kgs /m2 for 2 coats SURFACE PREPARATION � The steel surfaces to be coated shall be free from loose rust particles, oil, grease and materials which reduce bonding. Cleaning shall be done by sand blasting or by using hard wire brush. � The concrete to be coated shall be free from laitance, dust, loose material, surface contamination and materials which reduce bonding. � If the surface temperature is too hot, sprinkle water / wet the surface to bring down the surface temperature to ambient condition. Apply the coating as soon as the surface becomes dry. MIXING GUIDELINES (at 30°C) Add 300ml of water to 1Kg of powder and mix thoroughly for 3 minutes. Initially the mix may appear dry but keep mixing and the material will dissolve to form brushable consistency slurry. Apply the mixed slurry by brush onto the cleaned surface. SITE TEMPERATURE MIXING TIME * � Mixing times are based on using 20�C to 27�C temperature mixing water. During usage of higher temperature mixing water, the mixing time to be shortened appropriately. � The above mixing times are indicative only. Where mixing time is critical a trail mix is recommended. 50° - 35°C 3 - 5 Minutes 35° - 25°C 5 - 7 Minutes 25° - 10°C Until the slurry becomes warm - 10 Min WORKING TIME (at 30°C) ECOANTICORR 1� has a working time of 30 minutes at 30°C Hot Weather conditions: Working time will be further shortened at higher temperature site conditions. Working time can be marginally increased by using cold water for mixing, Can be further extended by adding proprietary retarder supplied by us, if required. Cold Weather conditions: Working time will be extended at Lower temperature site conditions. Working time can be marginally shortened by using hot water for mixing, Can be further shortened by adding proprietary accelerator supplied by us, if required APPLICATION GUIDELINES 2 coats are recommended. 2nd coat shall be applied after 1hr of 1st coat application. Wash off the equipments quickly as the material tends to set fast. INSTRUCTIONS FOR USE � Avoid application during hot sun and/or strong wind. � Do not add water over recommended dosage. � Apply only to sound, prepared substrates. � Mix the entire content of a single packing at one time and DO NOT USE PART VOLUME OF A PACKING

We manufacture, export and supply high glossy two pack yellow clear Anti Corrosive Epoxy Coatings. Known for providing excellent results, our Anti Corrosive Epoxy Coatings are known for providing complete anticorrosive protection in industrial & marine environments. Anti Corrosive Epoxy Coatings that we offer are useful in bridges, structures and in coastal area applications. Moreover, we provide bulk quantities of Anti Corrosive Epoxy Coatings at reasonable rates. Details : Color : Transparent yellow Composition : Epoxy base with anti-corrosive pigments Application : Brush, airless or conventional spray Recommended Thinner : ContiPaints® Thinner 71001 Packing Sizes : 5 Ltrs & 20 Ltrs Dual Pack Ratio (4:1) Recommended For : Bridges, Structural steel subject to aggressive environment, etc.

• Name: BLACK

first time in india ----  revolutionary product corrosion protection for your cars - patentented technology fight rust with electromagnetic technology - e.i.c.c.t. works on radio frequency eco friendly for car and your family appreciation for cars, one time installation - 2 years warranty exclusive distributor for tamilnadu, puducherry independently tested leading organisations and patented in u.s. , canada, china, germany, autralia, taiwan and many more countries..

Thermoplastic Road Marking Paint

Anti Corrosives Coatings, Acid Proof Cements, Polymer Concrete Products

Thermoplastic Paint, Road Safety Products, Lane Dividers, Road Studs

Anti Corrosive Coatings, Admixtures, Coatings, Flooring Products, Sealants

Bituminous Paint, Glass, Condom Mould, Slab Gap Sealing Compounds

Thermoplastic Road Marking Paint, Sign Boards, Aluminum Studs, Road Studs

Anti Carbonation Coating, Cement Anchor, Mortar Plasticizer

Anti Carbonation Coating, Stamped Concrete

Anti Corrosive Coatings, Refractories, Concrete Admixtures

Traffic Paints, Epoxy Enamel, Chalkboard Paint, Industrial Talc, Varnishes

anti-wear coatings, Friction Linings, Power Transmission Components

Anti Corrosion Wax Coating, Brake Shoe Bonding Adhesive, Rubber Cure Additive

Anti Glare Coating, Water Repellent Coating

Anti-carbonate Coatings, Structural Waterproofing

Anti Corrosive Bituminous Black Paint, Oil Based Primer, Fire Retardant Paint

Anti Friction Coatings, Boron Coatings, High Temperature Coatings

Bituminous Coating, Thermal Reflective Cool Roof Coating, Painting Contractor

Anti Reflection Coating on Lens Surface

Asphalt Coatings, Spatula SS Wooden Handle, Gauging Trowel

Anti Corossive Coatings, Fire Proof Coatings, High Temperature Coatings

anti-reflective coating, Hi-Index Lenses, Polarized Lenses

Anti Corrosion Coatings