Back Back
Water Bath Shaker
Water Bath shaker units are double walled with exterior body and inner chamber of stainless steel having effective insulation in between at hat does not allow the loss of heat for longer period of time. Double walled chamber, inner chamber made of stainless and outer fabricated out of cold roller mild steel sheets duly finished in attractive powder coat point. The pyramid-Cal lid is also made of stainless steel prevents falling of condensed water droplets on the inner space between the two walls is tightly packed with special grade glass wool in order to prevent thermal losses. Heating is achieved by immersion type heater and the temperature is controlled by hydraulic type thermostat within the operating range from Ambient +5oC to 95oC. The bath is provided with an oscillating tray riding on ball rollers oscillated through a gear variable speed motor. Shaking speed range is between 40 to 140 cycles per minutes. The shaking tray can either hold test tubes or conical flasks of 25 ml to 1000 ml as ordered by the users. Supplied completed with one shaking tray and cord and plug. Designed to work on 220 /.230 volts AC.Temp. Range : Ambient + 5o C to 90o C
...more
Vacuum Oven
Vacuum Oven is reliable day-to-day operation in variety of uses in the field of Medical, Industries etc. Construction : Unit is sturdy with double walled chamber. Inner chamber is cylindrical in shape made of stainless steel with provision for vacuum and the vacuum gauge is provided at the top of unit and outer chamber rectangular in shape made of thick mild steel with attractively finished with powder coated paint
...more
tubular furnace
The furnace is supplied in vertical and horizontal model, as per request. Double walled chamber outer chamber made of cold rolled mild steel sheets and finished in powder coating. The inner chamber is formed by high Alumina tube capable of withstanding temperature up to 1200â°C. The tube will have one end closed or both ends opened as per the requirement of customers. Insulation with high-density superior quality ceramic fibre blanket. The furnace is heated by KANTHAL heating elements. The temperature is controlled by Digital PID Controller with S.S.R. output. The sensor will be Cr/A1 type thermocouple. The size of the tubes available are 40 to 100 mm ID and with length of 350 mm to 650 mm.Temperature Range : 600 – 1200â° C Power supply : 230 Volts, Single Phase
...more
Orbital Shaker
This is for ideal for mixing and development of culture, chemicals ,solvent and various other application.The orbital shaker is assembled in heavy duty mild steel angle and sheet section. A speed selector switch for variable speed and main indicating lamp. Suitable to work on 230v, 50 HZ. Single phase AC mains.(With out rpm indicator).Optional Accessories Extra : Digital RPM indicator with self indicator sensor most advanced model.
...more
Muffle Furnace
We offer a wide range of Laboratory Muffle Furnaces in this category which includes muffle furnaces, industrial muffle furnaces and mild steel muffle furnaces. We manufacture a wide array of Muffle Furnaces, which is offered in different sizes as per the current industry standard. These furnaces are designed with complete perfection to assure low maintenance and high performance. Our product array are highly demanded in various application in the emerging field of agricultural, medical, research laboratories, industrial, ash determination, metal treatment and wool industries.Features : Temperature up to 1200oC. Time proportionate digital temperature controller with an accuracy of +/-2oC. Optional Extra Cost : Programmable Controller
...more
Mortuary Chamber
Construction : The chamber will be constructed of cold rolled mild steel outer wall with powder coat finish or fully stainless steel. The inner chamber made of 304 Grade stainless steel sheets to avoid any corrosion. Inner and the outer wall will be insulated with High grade glass wool to maintain low temperature.Individual cabinet type drawers with proper balancing will be provided .Each cabinet can be drawn separately as required .The drawers will be provided with roller mechanism for smooth movement and provided with locking arrangement. The base of the cabinet drawer (stretcher) will also be made of stainless steel of 304 grades.Door : The door will also be insulated with leak proof gasket along the edges and mounted on heavy duty handle and locking arrangement.Specially designed evaporated coil with forced air circulation fan assembly will be provided for faster cooling and maintain uniform temperature inside the chamber.Cooling System : The cooling of the chamber will be performed by means of hermetically sealed cooling compressors and cfc free.Temp. Controller: The temperature control is by digital temperature indicating controller working in conjunction with PT 100 sensor.Control panel: The control panel accommodates the Digital temperature controller, main MCB switch, fuse, indicating lamps.Capacity : 3 & 6 Bodies model is available. Temperature : 4oc for short terms storage and -10oc for long terms storage.
...more
Low Temperature Bath
Low temperature Baths are reliable day-to-day operation in variety of uses in the field of Medical, R&D units, Processing Industries etc.Construction : Unit is sturdy with Double walled chamber. Inner chamber made of stainless steel and Outer chamber made of cold rolled M.S. Sheets attractively finished in powder coating for durable operation.
...more
Laminar Flow Cabinet
We offer a comprehensive range of high performance horizontal, vertical Laminar flow clean air cabinets. These are designed to meet the filtration. Illumination, and noise & vibration requirements, providing particle free air to meet class 100 condition of US Federal Standard.Construction : All Laminar Flow cabinet are basically constructed out of SS.Air Flow And Filtration : Laminar Flow principle involves double filtration of air. Atmospheric air is drawn through pre filter and is made to pass through highly effective HEPA (High Efficiency Particular Air) filters having efficiency rating as 99.99% with cold DOP and 99.97% with hot DOP, thus retaining all air-borne particles of size 0.3 micron and larger. Double filtered air blow in laminar flow through the work table at designed velocity of 90 ft/min +/- 20%. Blower Motor Assembly : Statically and dynamically balanced, direct drive, sized to provide adequate air flow volume over the entire surface of HEPA filter. Fitted with 1/4 HP motor and operates with minimum noise level i.e. lower than 65db on scale and vibration less than 2.5 um. (0.0001 deg).Lighting : Work area properly illuminated by diffused glare free fluorescent light supplied with glass inlet, Front Door, Manometer, Wheel for easy movement, UV Lamp.Power Requirement: 230 V, Single Phase, 50 Hz AC SupplySize : Horizontal & Vertical.Optional accessories suitable for both models : Satin finish S.S. Table Top (In lieu of Formica top) Up to HL-22/HL-32 Satin finish S.S. Table Top (In lieu of Formica top) Up to HL-42/HL-62 Exhaust system & ducting Assembly
...more
industrial tray dryer
In order to attain maximum client satisfaction, we check the product quality on several counts at several stages. We are known for delivering the orders within the specified time frame owing to our modern transit facilities. The offered Industrial Tray Dryer is available with a quality warranty of 12 months.
...more
Incubator Shaker
Double walled chamber, inner made of polished stainless steel sheets and outer made of cold rolled mild steel sheets with powder coat finish. The wall is insulated with special grade glass wool. The inner chamber accommodates ones no. easily removable stainless steel tray at adjustable height and is also provided with a shaking platform with threaded holes for mounting stainless steel clamps for holding conical flasks from 50 ml to 1000 ml capacity. An outer double door with inner full view acrylic door permits inspection of specimens. Heating Element is Imported Nichrome wires and Temp. Is controlled by Automatic Digital Indicator Cum Controller working in conjunction with PT 100 sensor. Powerful air circulator creates positive airflow through the incubator. The shaker is driven by a variable DC motor with variable speed control panel accommodating, digital controller, pilot indicating lamps, ON/OFF switches etc., will be provided at the top of the unit.Platform Holding Capacity : 16 Conical flasks x 500ml 24 Conical flasks x 250ml Optional Extra Cost : Digital RPM indicator Digital Time (0-9999) Chamber Illumination-two fluorescent lamp Chamber illumination by two U.V lamps instead Of fluorescent Lamp Voltage stabilizer
Size : 450mm*450mm
Brand Name : sandy scientific
...more
Humidity Chamber
Humidity Chamber With cooling and without cooling :Construction : Double walled construction, interior made of thick gauge stainless steel sheets and exterior made of cold rolled mild steel sheets finished in powder coat. Inner space in between the walls is packed with special grade glass wool. The door is double walled having toughened glass window and seals against atmospheric infiltration by rubber gasket. The inner chamber accommodates stainless steel trays at adjustable height. Humidity is controlled by a humidistat humidity controller, having range 35% to 100% but humidity can be obtained from atmospheric humidity of 95% with sensitivity of +/- 3%.Temperature controlled by digital temperature controller from ambient +5ºC to 60ºC with an accuracy of +/- 1ºC. Heater and blower are fitted in the rear side of the above ambient temperature. For archiving below ambient temperature evaporator coils, compressor, condenser, and fan motor are provided. Humidity is attained by the mist of water that is circulated inside the chamber for maintaining 40% to 95% humidity. A water reservoir will be provided with back side of top side and water boiling tank down side of the chamber. Compact control panel with switches, indicating lamps, temperature controllers are fixed at the sides of the chamber for operational convenience. Chamber Size( Outer Ms and inner SS) : 450*450*600mm 605 * 605 * 605 mm 605 * 605 * 910 mm Optional Accessories for the above humidity chamber extra cost : Digital Humidistat controller cum-indicator having percentage 0% -to 95% Digital Timer
Brand Name : sandy scientific
...more
Hot Air Oven
Provided Hot Air Oven is widely appreciated in the market for its durability and easy installation. The inner chamber of the oven is made up of stainless steel and outer chamber with powder coating which reduces the heat losses and there by increases the service life of oven. This oven is manufactured by our talented professionals using premium quality raw materials and sophisticated technology. Further, this Hot Air Oven can be availed by our clients at highly competitive prices from us.Features : Long service life Robustness Compact design Excellent performance Further Details : Insulation : It is insulated by 3” gap between the walls which are filled with high-grade special wool for strong insulation and to avert the loss of heat. Door : Double-wall door of which inner part is made out of S.S. and outer chamber is made out of Mild-strength Steel coated with powder paint, erected on the strong S.S. hinges with spring lock. Heating elements : Heating elements are fabricated from top-grade nichrome wire that is placed within the porcelain beads and fixed at the bottom and two vertical sides for even temperature across the space. Temperature Control : The temperature is regulated by a flexible capillary, thermostat varying from 5o C above ambient to 250oC with the sensitivity of +/-2o C. Ventilation : Air ventilator is fixed at the top as well as at the bottom to release gases and fumes if any. Control Panel : The appliance is equipped with a panel that is below the door embodying a Capillary type Thermostat in order to control the knobs like Off & On switches, two pilot lamps and panel for fixing the Timer. Power Requirement : Provided with cord and plug, befitting for operating on 220V according to indicator single phase, 50 Hz AC supply.
...more
High Temperature Industrial Oven
Construction : It is triple walled construction. Inner chamber made of 304 grade stainless steel. Outer chamber is made of mild steel attractive finished in powder coating for durable operation. Inner chamber is fabricated with ribs to adjust trays to any convenient height. Oven supplied with removable perforated trays 2 or 3 depending on sizes. Trays are made of stainless steel.Insulation : It insulated by 3” gap between the walls is filled with special grade wool for proper insulation and to avoid heat losses.Door : It is double walled inner Stainless steel and outer chamber mild steel with powder coated paint fitted with heavy stainless steel hinges with spring loaded lock.Heating Elements : Heating elements are made of high-grade Nichrome wire, which are put inside the porcelain beads and placed at bottom and two vertical sides for uniform temperature all over the space.Temperature Control : The temperature is controlled by Digital Temperature Controller variable from 5o C above ambient to 250oC with a sensitivity of +/-2o C.Ventilation : Air ventilators are provided top at as well as the bottom to ventilate gases and fumes if any.Control Panel : The equipment is provided with a panel which is just below the door having a Digital Temperature Controller, On/Off switch, 2 pilot lamps and provision for fixing the Timer.Power Requirement : Supplied with cord and plug, Suitable to operate on 220V as per indicator single phase, 50 Hz AC supply.Including : Digital temperature Indicator com controller with RTD Sensor Air Circulating fan Assembly
...more
High Temperature Furnace
We are a manufacturer, supplier & dealer of High Temperature Furnaces. Lab High Temperature Furnace: High temperature Muffle Furnaces are designed to meet the requirements of varies customers in Industries, Educational Research fields etc.Construction : Double walled chamber outer chamber made of mild steel sheets and finished in powder coated paint. inner chamber is formed by high temperature withstand Zirconia Vacuum Board following by Ceramic fibre blankets on all the sides. Double walled door mounted on heavy-duty hinges in the front is provided with effective locking arrangements. Heating elements will be silicon Carbide Rods. Further the door is provided with door limit switch to cut off the powder supply whenever the door opened and restart when the door is closed. Temperature is maintained and controlled by Digital PID Temperature controller with Thyristor Control Device working in Conjunction with Cr/A1 Thermocouple. Supplied complete with control panel. Features : Continuous Operating Temperature : 1350o C Maximum Temperature : 1400o C Suitable to work on 220V, single phase 50 Hz, AC supply.
...more
Exhaust Fume Hood
Laboratory fumes hoods are one of the most important components used to protect laboratory personnel from exposure to hazardous chemicals and agents used in the laboratory. When used properly, they exhaust toxic, offensive or flammable materials when the containment of an experiments or procedures fails and vapour or dust escape from the apparatus being used.Construction : Cabinets is made of thick ply Board / M.S.duty powder coated/stainless steel (304).interiors coated with Asbestos/lead sheets and further coated with fire proof epoxy paint. Working table up to 2 feet is covered with glazed ceramic acid resistant tiles. Working table is covered with Granite/Tiles S.S 304.Door : Front door is made of 6mm clear Toughened glass .counter weight balance front door. Vertical sliding facility & the front door can be stopped at any point.Exhaust system : Exhaust blower consists of single phase motor which is enclosed in a wooden casing connected with a PVC Exhaust Ducting.Optional items : Base storage cabinet Wooden/M.S.body/S.S body. S.S. sink wash Basin with inlet & outlet. Fire proof Granite Working area Size (W x H x D) : 2’ x 2’ x 2’ 3’ x 2’ x 2’ 4’ x 2’ x 2’ 6’ x 2’ x 2’
...more
Deep Freezer
Sandy Scientific Deep Freezer are reliable day-to-day operation in variety of uses in the field of Medical R & D unit, Agriculture, Industries, Educational Institutions etc.Deep freezer (Vertical) : Construction : Double walled chamber. Inner chamber made of stainless steel well-polished and fusion welded. The outer is made of M.S. sheets attractively finished in powder coating for durable operation. The inner chamber accommodates stainless steel Trays. Insulation : High grade glass wool or PUF insulation is provided at the sides between to two walls to minimize the sweating in humid conditions. Evaporating coils are lead soldered and fixed in the back side of the inner chamber. Double walled door in front provided with magnetic gasket for perfect sealing and provided with heavy duty latching arrangement. Temperature maintained and controlled by digital temperature controller working in conjunction with PT 100 Sensor. Door operated illumination lamp is provided inside the chamber. Refrigerant system consists of compressor, air cooled condenser and heavy duty motor driven fan provided at the bottom while the control panel with built in digital temp. Controller cum indicator, indicating lamp with switches etc. provided on the top of the cabinet. Temperature Range : Ambient 5oC to -20o 40ocPower Supply : 230 Volts 1 Phase, 50 Hz Ac Supply Deep freezer (horizontal) : Construction : Double walled chamber with opening at the top. Top portion of the chamber and top lids are made of thick stainless steel well-polished and fusion welded. The outer chamber is made of M.S.sheet and attractively finished in powder coated finish. Inner chamber is made of stainless steel. Insulation : High class insulation with combination of special grade glass wool and PUF insulation is provided at the sides between to two wall to minimize the sweating in humid conditions.The top lid is provided with gasket seals and locking arrangements. Evaporating coils are lead soldered and fixed in the back side of the inner chamber. Temperature maintained and controlled by digital temperature controlled working in conjunction with PT 100 sensor. Refrigerant system consists of compressor, air cooled condenser and heavy duty motor driven are provided at the bottom. The control panel with built in digital Temp.Controller cum indicator, indicating lamp with switches etc. are provided.Temperature Range : Ambient 5oC to -20oc+/- 1ocPower Supply : 230 Volts 1 Phase, 50 Hz Ac Supply
...more
Constant Temperature Bath
We are a manufacturer, supplier of Constant Temperature Bath. Lab Constant Temperature Bath: Double walled chamber, inner made of thick stainless steel sheets and outer made of mild steel sheets duly finished in powder coating. Glass Window provided in the front side for an easy inside view. Inner space in between the walls tightly packed with special grade glass wool. Top Lid is made of stainless steel sheet plate and provided with handle. Heating elements are chromium plated immersion type. Temperature controlled by precision thermostat. A medium speed stirrer with 1/20 HP motor is fitted to the unit for continuous stirring and thus maintaining uniform temperature the working chamber. Built in control panel accommodates indicating lamps, precision thermostat, on/off switch, speed regulator to control speed regulator to control speed of the stirrer. Designed to work on 220/230 volts a/c supply.Temperature Range : Ambient+5 â°C to 100 â°C +/-2 â°COptional Extra Cost : Digital on/off Temperature Controller with sensor PID temperature controller for< 1 â°C accuracy FHP Circulating Pump to re- circulate liquid to an external source Fluorescent Lighting arrangement
...more
Bod Incubator
B.O.D Incubator is a most reliable and versatile and highly reliable low temperature incubator to make Biochemical Oxygen Demand determinations and for preservation of vaccines, insulin, level extracts, chemicals etc.Construction : Double walled robust cabinet , wheel mounted , insulated with 3” mm super glass wool between the intermediate and exterior walls, which forms the main structure .Outer chamber is made of mild steel attractively finished with powder coating for durable Operation. Inner Chamber made of stainless steel interior walls has support allowing wide range of shelf positions and spacing. Door fitted with double glass window and heavy stainless steel hinges facilitate inspection of samples without opening the door. Transparent glass door let viewing the specimen inside without disturbing chamber temperature. Lock arrangements is provided in the double walled outer door. Unit fitted with a door-operated lamp of illumination inside the chamber. Temperature Control : B.O.D incubator is the excellent and reliable Digital temp. Controller-Cum-Indicator with RTD sensor Control range from 5o C to 60o C +/- 1o C. Hermetically sealed high performance kirloskar-Copeland compressor, air cooled condenser works efficiently to lower the inside chamber temperature and accessories provided at the bottom of the chamber. Heating elements made of Nichrome wires are placed in the inner back side of the BOD Incubator. Cooling coils are distributed all-round the chamber and lie in the air circulation path. Air is circulated by a fan to keep the temp uniform throughout inner chamber. Control Panel : All the Controls and circuitry are housed at the top of the incubator and therefore protected from spillage. Separate indicator lamps for mains, heating and cooling are fitted. Temperature setting knob allows the user to select and set any desired temp. Supplied complete with 2 or 3 shelves of stainless steel as per chamber, Cord and plug suitable to work on 220V, 1phase, 50HZ, Ac supply. The unit is provided with 4 Nos. wheels for easy movements. Optional Accessories : Automatic Digital Time range 0-24rs(0-9999) Stabilizer 1KVA
...more
Bacteriological Incubator
Construction : Bacteriological Incubator is sturdy. Double walled with doors, Inner chamber made of stainless steel. Door fitted with Double glass window and heavy stainless hinges facilitate inspection of samples without opening the door. Transparent glass door let viewing the specimen inside without distributing chamber temperature. The outer body is of thick mild steel sheet with attractively finished in powder coating for durable operation. Inner space in between the walls is filled with 3* fine glass wool insulation to minimize the heat loss between the walls. The temperature is controlled by the room temperature above the ambient up to 60o C with a sensitivity of +/- 1 to 3o C temperature is achieved by putting nichrome wire heater inside the ribs at back side of the chamber to uniform temperature. Inner chamber, accommodates easily removable stainless steel perforated trays adjustable height, adjustable Air ventilator is provided at the top. Incubator is fitted with a suitable Air Circulating Fan assembly (Optional) Supplied complete with trays, air ventilators, pilot lamps indicating Lamps on/off switch, & Cord and plug. Suitable to operator on 220 volts, 1 Phase, 50 Hz AC Supply. Optional Accessories : Microprocessor Based Digital Temp Indicator cum Controller Air Circulating Fan Timer Digital 0-90 hour Digital Temp Indicator cum Controller
...more
Autoclave Steam Sterilizer
We are successfully engrossed in manufacturing and supplying exceptional quality Laboratory Autoclaves like portable autoclave, vertical autoclave, lab autoclave, etc. At our highly advanced manufacturing set-up, these autoclaves are manufactured by utilizing the best quality components and contemporary techniques under the visionary guidance of our talented professionals. The offered autoclaves find application in chemical laboratories for sterilizing purpose. In addition to this, clients can avail these Laboratory Autoclaves at reasonable prices from us.Features : Hassle free performance Sturdy construction High operational speed Low electricity consumption Construction : Double walled construction with boiler made of SS thick sheet. Outer shell is made of SS finished and Inner and outer chamber is fully made of SS also available. Lid is made of SS thick plate and is tightened all-round by wing nut locking system. Sterilizer is hydraulically tested up to 20 psi as safety measures and fitted with Neoprene Rubber Gaskets to ensure tight sealing. Autoclaves are fitted with pressure gauge, steam release cock, Spring – loaded safety valve that can set at any selected point 15psi to 20 psi +/- 3 psi and drain outlet.An ISI marked immersion type suitable rating element heats the water and steam to desired temperature and pressure. Supplied complete unit with Pedal Lifting Device, Perforated S.S Basket, and Wing Nut opener. Cord and plug to work on 220V, 50Hz AC Supply : Regular Working Pressure : 15psi Optional Accessories for the above Autoclaves extra cost : Automatic pressure control switch Automatic low water level cut-off device Automatic 0-60 minutes Electric Digital Temperature Controller Cum Indicator with sensor Radial Locking System Automatic Timer 24 hours Range (0-9999)
...more
Muffin Pans
Fret not! we are here to help you out with the payment procedures. Be it online payment procedure, cash, bank deposits or others, we are here to assist you all the way through the payment process. We are actively engaged in supplying exemplary range of products from our ultramodern warehousing facility in chennai(india).
...more
Autoclaved Aerated Concrete Plant
Reviews & Ratings
Write a ReviewBe first to Rate
Rate ThisOpening Hours
Share your Correspondence Details to receive messages from Sandy Scientific Instruments & Co
Post Free Ad