Senlog Automation Pvt Ltd Ashok Nagar, Chennai, Tamil Nadu

Our weighing system can be fitted to wide range of product category Wheel Loader / Compact Wheel Loader/Load Haul Dump (LHD) Loaders /skid steer loader/backhoe loader/Fork Lifts Key Features  High precision and legal for trade  Avoid overload fines by loading target weight  Reduce haulage cost avoidingunder load  Swap scale from one loader to another for no downtime  Reduce cycle times at the weighingbridge  Weigh bridges and associated runningcosts can be eliminated  UDB data transfer at no extra cost  Worldwide factory trained support backup  Real time, web-based consultationof loading and production data fromany work station, tablet or smart phone  Multiple weighing modes: Incremental,Target, Vehicle and Recipe  End-to-end management of thepayload process, with print out of thedelivery tickets and data sent to billingsystem in real time using wirelesscellular technology  Minimum components with no junctionboxes  To Increase operator efficiency

Our new concept of wagon tipper weighing system replaces the conversional load cell based wagon tipper weighing system. The new concept is breaded in the felid with our experience to overcome the problem pertaining to the structure based system which is prone to fail due to high impact and sudden drop. Our new concept is easy to install. Doesn’t require any mechanical modification on the tipper platform. Innovative SenTag wireless design allows you to remotely connect weight from harsh track environment to comfortable control room. Our wagon tipper weighing system can be installed without any modification on the existing wagon tipper table.   Key Features    No Civil work  Little mechanical modification required  Impact load bearing capacity is high  Provided with overload protection

Tundish are used for example in continuous casting facilities where the liquid steel is cast into continuous strands. The weighing equipment is used in the ladle turret, tundish and outgoing roller table to determine the weight and control the process. Our tundish scales are very robust to withstand the large impact and shock load, our high temperature load cell are suitably designed and fit in to be turret application with wire and wireless inter connectivity. The tundish bar can withstand up to 200°C without any external insulation. The tundish can be manufactured to cater the specific requirement of high temp with air burging and ceramic and insulating materials The incredibly robust ladle turret scales are manufactured for the prevailing harsh ambient conditions. They are not affected by shock, interfering forces or huge fluctuations in temperature. Key Features  High accuracy and reliability  Mechanically Rugged design  High resistance to the influences of temperature  Turret bar can withstand up to 200°C  Wireless transmission of the weight to PC( or) PLC  Suitable for tough environmental conditions

Our KIMAX 2 is most simples in design and best one in accuracy and repeatability. The system works on the principle of that the strain gauge pasted on the axle sensor, bending for acting axle is sensed by our axle sensor and weight is calculated. The low level signal from the axle sensor is amplified and filtered by the high precision monolithic A/D converter and converted into Digital format. The digitized data is being further processed and store according to the customer need and application. Key Features  Current total load for the entire vehicle  Total weight per tractor/trailer  Current load on all individual axles  Payload for the entire vehicle  Payload per tractor/trailer  Alarm for overload on individual axles  Alarm for total weight on trailer  All weights is displayed in tonnes  No Need to go weigh bridge all the time, know the weight in truck its self

In steel industries torpedo laddle car play the vital role in transporting large amount of hot metal form blast furnace to poring point. Accurate weighing of torpedo is the need for customer and we Aditya Technologies designed the product according to the CUSTOMER VOICE. A simple, reliable yet powerful accurate weighing based on the RDM special purpose load cell designed the replace the existing rail without any modification not even a screw to be replaced . The RMD can be designed with the site existing rail gauge and ready to fit factory made sensors to replace the existing rail to convert in to a accurate weighing system. All type of torpedo car with any length is weighed with suitable no of RDM. Key Features  High accuracy & reliability  Mechanically rugged design  High resistance to the influences of the ambient temperature  Particularly suitable for harsh environmental conditions  Hassle free installation  Robust maintenance free system  Full onsite commissioning and support

Quenching car large structure with 400 to 500 tons tare Wight, we designed and developed a simple weighing system which can be mounted on the track, with maintaining the high and shape of existing railgauge. The system can accurately measure the eve a small quantum of the material loaded in to the quenching car, high tare load net The system can be integrated with user interface and remote PLC connectivity toknow the time of loading,unloading, travel time, cycle time, shock resistance Our innovative drop replacement design, load pin based design allow any car to be converted in to the accurate weighing system with minimum shutdown. Our futuristic design not only minimizes the showdown and reduces the day to day maintenance of truck based system and allows the equipment to function to full life Our custom made load pin directly fit in to the axle of the car to measure the load on the car   Key Features    Accuracy and reliability  Full onsite commissioning and support  High reliability using proven load cell design  Special Software adaptations  No Civil work  Little mechanical modification required  Impact load bearing capacity is high

Pusher car is a large structure based machine with 400 to 500 tons tare Wight weighing low net weight.We have designed and developed a simple weighing system which can be mounted on the track, with maintaining the height and shape of existing rail gauge. The system can accurately measure even a small quantum of the material loaded in to the Pusher car. The system can be integrated with user interface and remote PLC connectivity to know the time of loading, unloading, travel time, cycle time, shock resistance etc.. Our innovative drop replacement design, load pin based design allow any car to be converted in to the accurate weighing system with minimum shutdown. Our futuristic design not only minimizes the showdown and reduces the day to day maintenance of truck based system and allows the equipment to function to full life Our custom made load pin directly fit in to the axle of the car to measure the load on the car   Key Features    Accuracy and reliability  Full onsite commissioning and support  High reliability using proven load cell design  Special Software adaptations  No Civil work  Little mechanical modification required  Impact load bearing capacity is high

Billet weighing system is customized to fit in to existing roller table. No matter the system can capable to accurately record the weight of moving billet with suitable stopper arrangement and lifting for high temp hot billets. Also the system can be integrated with PLC to record the billet weight in synchronisationwith PLC. We also provide the customized software application to monitor the billet production process.Fully integrated billet weighing system used to measure the hot and cold billet in static and dynamic mode. Key Features  Accuracy and reliability  Full onsite commissioning and support  High reliability using proven load cell design  Special Software adaptations

Ladle turret scales are used for example in continuous casting facilities where the liquid steel is cast into continuous strands. The weighing equipment is used in the ladle turret, tundish and outgoing roller table to determine the weight and control the process. Our turret scales are very robust to withstand the large impact and shock load, our high temperature load cell are suitably designed and fit in to be turret application with wire and wireless inter connectivity. The turret bar can withstand up to 200°C without any external insulation The turret can be manufactured to cater the specific requirement of high temp with air burging and ceramic and insulating materials The incredibly robust ladle turret scales are manufactured for the prevailing harsh ambient conditions. They are not affected by shock, interfering forces or huge fluctuations in temperature. Key Features  High accuracy and reliability  Mechanically Rugged design  High resistance to the influences of temperature  Turret bar can withstand up to 200°C  Wireless transmission of the weight to PC( or) PLC  Suitable for tough environmental conditions

We SENLOGIC designed and developed ready to deploy a MOBI RAIL based weighing system to weigh the Hot metal ladle car capacity up to 400 tons. The MOBI RAILis designed to withstand high harsh environment without scarifying the accuracy of weighing, which can be fitted in the existing rail without any civil and structural modifications. Our MOBI RAIL is suitable for tough environmental conditions. The Mobil rail facilitates and accommodates various types of ladle car configuration to weigh in static and dynamic mode.Our MOBI RAIL is high temperature weighing sensor could able to withstand and accurately weigh up to 200 degree Celsius. The sensor can be used without water, air, oil berging for higher temp and special application. Key Features  High accuracy  Wireless transmission of the weight to PC (or) PLC  Civil work is most minimum  MOBIRAIL based static weighing of ladle cars  Suitable for tough environmental conductions  Mechanically rugged design  High resistance to the influence of temperature  MOBIRAIL is modular based weighing structure

SENLOGIC cranes weighing system designed to record display and transmits the crane lifting load for any make and model of crane. No matter the type of crane prevent us installing such system. We conceptualize,conceive custom designed according to specific crane being used in SMS, Scrape handing, billet and finished product handling. We not only provide weighing solution but also provide state of art technology incorporated in transfer of the data remotely through wireless/ GSM /GPRS MODEM/ WIFI/MESHtechnologies. Nomatter how critical the solution is Aditya team find the right solution with a great involvement in the technology design and implementation from concept to commissioning. Key Features  High accuracy & reliability  Custom designed to suit specific design and application  Remote connection through RF/GSM modem  Hassle free installation  No mechanical and electrical modification  Wireless communication between the load cell / encoder remove the requirement of festooning cable  Customized load pin /Load cell  High temperature for SMS and steel melting shop & other application  Robust maintenance free system  Full onsite commissioning and support

Our weighing system can be fitted to wide range of product category Magnet Material handler /Excavator Mounted Magnet/ Grapple Machine Key Features  High precision and legal for trade  Avoid overload fines by loading target weight  Reduce haulage cost avoidingunder load  Swap scale from one loader to another for no downtime  Reduce cycle times at the weighingbridge  Weigh bridges and associated runningcosts can be eliminated  UDB data transfer at no extra cost  Worldwide factory trained support backup  Real time, web-based consultationof loading and production data fromany work station, tablet or smart phone  Multiple weighing modes: Incremental,Target, Vehicle and Recipe  End-to-end management of thepayload process, with print out of thedelivery tickets and data sent to billingsystem in real time using wirelesscellular technology  Minimum components with no junctionboxes  To Increase operator efficiency

Key Features    High precision and legal for trade  Avoid overload fines by loading target weight  Reduce haulage cost avoidingunder load  Swap scale from one loader to another for no downtime  Reduce cycle times at the weighingbridge  Weigh bridges and associated runningcosts can be eliminated  UDB data transfer at no extra cost  Worldwide factory trained support backup  Real time, web-based consultationof loading and production data fromany work station, tablet or smart phone  Multiple weighing modes: Incremental,Target, Vehicle and Recipe  End-to-end management of thepayload process, with print out of thedelivery tickets and data sent to billingsystem in real time using wirelesscellular technology  Minimum components with no junctionboxes  To Increase operator efficiency

Overload Prevention and Production Monitoring The Dumper Load payload monitoring system for off-highway rigid dump trucks was developed directly on opencast sites in order to perfect the instrument’s inherent operating and automation characteristics. The integration of the instrument into the dumper work cycles makes productivity monitoring much easier and more accurate. Lower maintenance costs Versatile and fully automatic, this product ensures that the dumper is used in compliance with its design standards. Preventing overload means lower maintenance costs and tire wear, both important points to consider when managing a dumper fleet. The instrument is also capable of remote transmission of load status in order to optimize fleet distribution inside a mine. Proper distribution of the fleet cuts down on unproductive delays and assists in the decision-making process with regard to its replacement. It is clearly an indispensable tool that ensures reliable data and eliminates queries. Key Features  Programmable maximum load  Axle weight monitoring  Loading machine payload monitoring  Loading indicator lights  Loading/unloading cycle management  Fully automatic without the need for human intervention  D- Logger port for pocket-size data memory or real-time wireless data transmission

First fully automatic ADT monitoring system. Operator merely selects the Load and Dump function on parking and the system does the rest. Excavator or Loader operators can load according to the flashing of the large easily visible strobe. WHY EQUIP YOUR ADT WITH VEI – SENLOGIC PAYLOAD MONITORING  Load right on the spot  Reduce truck wear on: tyres, transmission, engine & bodywork  Production Monitoring in real time on your tablet, smart phone or PC  Know beforehand the transported cost per ton  Track loading efficiency  Reduce fuel consumption by preventing overloading  Worldwide factory trained support backup  1 years warranty, best in the industry The Weighing Concept Weighing is accomplished by sensing the axle deformation caused by the load being placed in the body. Our hi-tech, heavy duty sensors are installed in such a way so as to provide an accurate weight whilst loading and operating in the toughest of site conditions. “A simple solution providing outstanding results”.