Sound Level Meters Dealers in Chennai

We make available different types of Vibration Instruments such as vibration analyzer, vibration meter and vibration data collector cum balancer. The name of our company surfaces prominently among the trusted Manufacturers, Exporters and Suppliers of Vibration Instruments from Tamil Nadu, India. The entire range of our Vibration Instruments is manufactured using high-grade components and sophisticated technology at our highly advanced manufacturing unit. Our Vibration Instruments are well-tested and therefore, are safe to use.

The new Kanomax sound level meter is designed to be compact, lightweight and easy to use. It complies with the type 2 ANSI S1.4 1983 standard , and has an innovative, unique 0-dB feature that eliminates the self-noise of the microphone. This technology extends the lower limit of the measurement range to lower than 0 dB-SPL.

EQ35, PQ35 & ZQ35 meters measure ACDC Voltage or Current and frequency. These meters are installed on 35mm Din rail, the mounting width is 45mm and it is housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).

• Material: ABS, Plastic
• Certification: CE Certified
• Weight: 100gm, 150gm
• Feature: Durable, Easy To Install
• Power Source: Battery
• Warranty: 1yr
• Automation Grade: Automatic

• Weight: 195 gm
• Warranty: 2 Years
• Model Name/Number: Testo 815
• Brand: Testo
• Usage/Application: Industrial
• Packaging Type: Box
• Accuracy: 1.0 dB
• Display: LCD
• Measuring Range: +32 To +130 dB
• Power Supply: 9V Block Battery, 6F22
• Calibration: Manual
• Resolution: 0.1 dB
• Dimensions: 255 x 55 x 43 mm
• Battery Life: 70 hours

• Brand Name: Embsys
• Display: Digital
• Power Supply: 3.7V
• Response Time: 60s
• Resolution: 1ppm

• Application: Laboratory
• Brand Name: TNEI

Specifications: Magnification: Vibration Generation: Capacity 5 Newton Excitation Frequency :50 Hz to 1 K HZ Excitation Voltage : 0 to 10V P to P Vibration Sensor : Piezoelectric type Vibration Indicator :3 ½ digit LCD display by selection through selector switch

• Accuracy: ±1.4 dB (under reference conditions: 94 dB, 1 kHz)
• Measuring range: 30 to 130 dB
• Frequence range: 20 to 8 kHz
• Resolution: 0.1 dB

The top-of-the-range testo 816-1 dB meter for sound level measurement complies with all requirements with regard to the execution of non-conform sound level measurements according to IEC 61672-1 Class 2 and ANSI S1.4 Type 2. This makes it suitable for carrying out sound level measurements in the workplaces as well as in public places, industry and production. The testo 816-1 has all the features which its little variant, the testo 816, has but also comes with a built-in data logger that can save up to 31 000 readings and dedicated PC software. The dB meter for pros: measure, save, analyse The testo 816-1 also comes with a practical all-in-one carry bag and a whole host of technical features and benefits designed to allow you to carry out professional sound level measurements as a part of health and safety inspections and immission controls. Benefits include being able to change the measuring rate from slow (one measurement per second) to fast (one measurement every 125 milliseconds) depending on the type of measurement, and being able to select between two frequency measurement types: the characteristic curve A corresponds to the way the human ear perceives sound pressure while the characteristic curve C measures the low frequency percentage of the sound.

• Excitation Frequency: 50 Hz to 1 K HZ
• Excitation Voltage: 0 to 10V P to P
• Vibration Sensor: Piezoelectric type
• Product Code: ELSHADDAI MTR - 004

• Brand Name: SANDS
• Color: Grey
• Condition: New
• Application: Vibration-based Condition Monitoring
• Type: Vibration Monitoring System
• Country of Origin: India

ARGUS Tri-axial wireless vibration analyzer brings a new dimension to the world of predictive maintenance to easily diagnose the health of motors and any connected driven assets like pumps, fans, compressors, etc. It enables easy condition monitoring of rotary machines and detects faults well before equipment failure. ARGUS reduces maintenance costs and increases asset lifespan. The super-compact, IP65-rated vibration sensor provides reliable data for continuous monitoring and remote diagnostics. This portable sensor simultaneously measures vibration in three directions and is used as both a Single-axial sensor & a Tri-axial sensor. The dedicated ARGUS app allows you to view and store the RMS values of Velocity & Acceleration, Time waveform, and Velocity & Acceleration FFT spectrums on the smartphone. ARGUS can be mounted in any environment using a magnet, adhesive & stud.

The reliable, repeatable, accurate way to check bearings and overall vibration. Make go or no-go maintenance decisions with confidence. The Fluke 805 Vibration Meter is the most reliable vibration screening device available for frontline mechanical troubleshooting teams that need repeatable, severity-scaled readings of overall vibration and bearing condition. External sensor is also available to measure overall vibration but it’s an optional accessory. What makes the 805 the best choice?   A meter – not a pen – that measures overall vibration as well as specific variables like bearing condition and temperature, to provide a more complete picture.   A combination vibration and force sensor tip that compensates for user variance (force or angle) yielding accurate, repeatable readings.   A four-level severity scale and onboard processor calculate bearing condition and overall vibration using easy-to-understand textual alerts (Good, Satisfactory, Unsatisfactory, Unacceptable).   Sensor sensitivity can read a wide range of frequencies (10 to 1,000 Hz and 4,000 to 20,000 Hz) covering most machine and component types.   Straight-forward user interface that minimizes the user inputs to RPM range and equipment type. Features and Benefits   Innovative sensor design helps minimize measurement variations caused by device angle or contact pressure   Consistent data quality at both low and high frequency ranges   Four-level scale indicates severity of problems for overall vibration and bearing condition   Exportable data via USB   Trending in Microsoft® Excel using built-in templates   Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement for a wide variety of machines   Crest Factor+ provides reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz   Colored lighting system (green, red) and on-screen comments indicate how much pressure needs to be applied to take measurements   Temperature measurement with Infrared Temperature Sensor increases diagnostic capabilities   On-board memory holds up to 3,500 measurements   Audio output for listening to bearing tones directly   External accelerometer support for hard to reach locations   Flashlight for viewing measurement locations in dark areas   Large screen with high resolution for easy navigation and viewing Use the 805 to check the following machine categories: (37 machine categories totally) Chiller (refrigeration)   Reciprocating (Open motor and compressor separate)   Reciprocating (Hermetic motor and compressor)   Centrifugal (Hermetic or Open Motor Fans   Belt-driven Fans 1800 to 3600 RPM   Belt-driven fans 600 to 1799 RPM   General direct drive fans (direct coupled)   Vacuum blowers (belt or direct drive)   Large forced draft fans (fluid film brgs.)   Large induced draft fans (fluid film brgs.)   Shaft-mounted intergral fan (extended motor shaft)   Axial flow fans (belt or direct drive) Cooling tower drives   Long, hollow drive shaft (motor)   Belt drive (motor and fan - all arrangements)   Direct drive (motor and fan - all arrangemetns Centrifugal Pumps Note: height is measured from grade to top motor bearing   Vertical pumps (12’ to 20’ height)   Vertical pumps (8’ to 12’ height)   Vertical pumps (5’ to 8’ height)   Vertical pumps (0’ to 5’ height)   Horizontal centrifugal end suction pumps – direct coupled   Horizontal centrifugal double suction pumps – direct coupled   Boiler feed pumps (turbine or motor driven) Positive Displacement Pumps   Positive displacement horizontal piston pumps (under load)   Positive displacement horizontal gear pumps (under load) Air compressors   Reciprocating   Rotary screw   Centrifugal with or without external gearbox   Centrifugal – internal gear (axial meas.)   Centrifugal – internal gear (radial meas.) Blowers   Lobe-type rotary blowers (belt or direct drive)   Multi-stage centrifugal blowers (direct drive) Generic gearboxes (rolling element bearings)   Single stage gearbox Machine tools   Motor   Gearbox input   Gearbox output   Spindles – roughing operations   Spindles – machine finishing   Spindles – critical finishing What is Crest Factor+?   Crest Factor+ is a new proprietary algorithm (or technology) that takes the confusion out of bearing assessment. The original Crest Factor is used by vibration analysts to identify bearing faults. It is defined as the ratio of the peak value/RMS value of a time domain vibration signal. A key limitation of the original Crest Factor algorithm is that it does not increase linearly as the bearing degrades, making it very difficult to determine the severity of mechanical issues. In fact, the Crest Factor can actually decrease as a bearing nears catastrophic failure due to large RMS values. In order to overcome this limitation, Fluke uses a proprietary algorithm known as Crest Factor+ (CF+). CF+ values range from 1 to 16. As the bearing condition worsens, the CF+ value increases, ensuring the user is easily able to recognize the severity of the problem. To make things even simpler, Fluke has also included a four-level severity scale that identifies the bearing health as Good, Satisfactory, Unsatisfactory or Unacceptable.

Emission Monitors Analyzers are often the first indication of a potential machine failure. Conditions that can cause these vibrations include unbalance, misalignment, looseness of parts, deteriorating rolling element bearing and gear damage. Vibration analysis instruments and systems can help detect many serious problems at an early stage, allowing personnel to undertake remedial work in a timely manner.

• Specification: Magnification, Vibration Genereation, Capacity 5 Newton
• Excitation Frequency: 50 Hz to 1 K HZ
• Excitation Voltage: 0 to 10V P to P
• Vibration Sensor: Piezoelectric type
• Vibration Indicator: 3 ½ digit LCD display by selsection through selector switch
• Product Code: SAMS MTR - 004

• Resolution: 0.1dB
• Weight: 144gms Including Battery (approx.)
• Functions: MAX / MIN / HOLD, Auto Power Off
• Range: 35dB
• Accuracy: ± 1.5dB (under reference conditions
• Power: 9V Battery
• Dimension: 172 x 56 x 39 mm (approx.)
• Accessories: Carrying Case, Inst. Manual,9V Battery (installed)

• Weight: 375 gms
• Brand Name: Vibhro
• Measurement Ranges: Acceleration 0-199.9 and 0-19.99 m/sec, True RMS
• Displacement: 0-199.9 and 0-1999 micron
• Battery: Internal Ni-MH rechargeable battery
• Dimension: 175 (L) x 70(W) x 25(D) mm.
• Temperature Range: 0-45 deg C upto 90% humidity
• Usage/Application: Laboratory

• Type: Vibration Meters
• Material: Aluminium, Plastic, Stainless Steel
• Shape: Circular, Rectangular, Round, Square
• Voltage: 110V, 220V
• Condition: New Used
• Application: Industrial
• Display Type: Analog, Digital
• Rated Power: 100W, 200W, 250W, 40W
• Power Source: Electric
• Feature: Durable, High Accuracy, Light Weight, Low Power Consumption, Stable Performance
• Warranty: 1Years, 6Month

• Application: Industrial
• Brand: LUTRON 
• Model Name/Number: SL 4010
• Packaging Type: CARTON BOX
• Accuracy: 1.0 dB
• Display: LCD
• Measuring Range: 30 TO 130DB
• Power Supply: 9v 

• Application: Used for measuring sound or noise* for Community Noise Analysis, Building
• Brand: Fluke
• Resolution: +-1.5 dB
• Model Name/Number: 945
• Packaging Type: Packet
• Display: LCD
• Measuring Range: 130 dB
• Calibration: Automatic

• Display: LCD
• Features: Accurate measurements , Easy to use, Vast application area .
• Accuracy: 1.0 dB
• Measurement Range: 35-130 dB, 30-130 dB
• Calibration: Automatic, Semi Automatic
• Resolution: 1 dB
• Brand Name: Royal Corporation

• Resolution: 1 dB
• Model Name/Number: Digital Sound Level Meter with Octave
• Usage/Application: Measurement
• Accuracy: 1.0 dB
• Display: Digital
• Measuring Range: 140 dB range
• Power Supply: Battery Up to 15 hours
• Calibration: Automatic
• Frequency Range: 16Hz - 16 Khz for 1/1 Octave, 12.5 Hz - 20 KHz for 1/3 Octave
• Sound Range: 20 to 140 dB range
• Condenser Microphone: Yes
• On/Off timers: 6 Sets With Selectable Times And A Repeat Function

• Material: Plastic
• Brand Name: Lutron
• Features: Quality tested , Rugged design , Longer service life
• Usage/Application: Industrial

Model : SL-4010 * Frequency & time weighting meet IEC 61672 class 2. * 35 to 130 dB, 3 ranges, Data hold. * A frequency weighting, Fast time weighting. * Size : 250 x 83 x 32 mm.     Model : SL-4012 * 30 – 130 dB, Auto range, Manual range. * Frequency & time weighting meet IEC 61672 class 2. * A & C frequency weighting. * Fast / Slow time weighting, Data hold. * Peak hold, Memory (max., min.). * AC output & RS-232. * Size : 268 x 68 x 29 mm.     Model : SL-4022 * Frequency & time weighting meet IEC 61672 class 1. * 30 to 130 dB, 3 ranges, Max. hold, Data hold. * A/C frequency weighting, F/S time weighting. * AC output, Internal 94 dB calibration. * Professional sound level meter. * Size : 260 x 87 x 36 mm.     Model : SL-4030 * Main specification meet IEC 61672 class 2. * A, C weighting, Max. hold,fast/slow time weighting, AC/DC output. * Range : 3 ranges, 30 to 130 dB. * Mini pocket size. * DC 9V battery (006P) or DC 9V adapter in.   Model : SL-4011 * Frequency & time weighting meet IEC 61672 class 2. * A, C weighting, Max., Data hold, fast/slow time weighting. * AC/DC output, Max. Hold. * Reset button for Max. hold. * Range : 3 ranges, 35 to 130 dB. * Size : 250 x 83 x 32 mm     Model : SL-4001 * Frequency & time weighting meet IEC 61672 class 2. * A, C weighting, Max. hold, Data hold, fast/slow time weighting, AC/DC output. * Range : 3 ranges, 30 to 130 dB. * Size : 245 x 80 x 35 mm.

Vibration Meter that we offer is a handheld analog instrument that is specifically designed for a large variety of vibration measurement applications. Our Vibration Meter is able to indicate True RMS vibration displacement. Vibration Meter, provided by us, is appreciated for its easy usage, high efficiency and accurate measurement. Our Vibration Meter is suitable for different vibration measuring needs like for turbines, fans, generators, blowers, pumps, motors, alternators, bearings, etc. Vibration Measurement Vibration measurement on rotating machinery is normally done for two major applications : Quality Control, and Predictive Breakdown Maintenance In addition to the commonly understood QC application on motors, generators, blowers, or a host of rotating or reciprocating machinery, vibration is increasingly being used with enormous benefits for the second application : Predictive Breakdown maintenance.In continuously running plant, where sudden breakdowns can be disastrous, vibration is an immensely important indicator for planning an effective predictive maintenance strategy. Periodically observed vibration readings at strategic points on the machine will indicate a rising trend well before a breakdown occurs. This signals the need for taking timely corrective action. This will drastically reduce sudden and unexpected machinery failures, thus resulting in substantial savings in downtime. Features Hand- Held unit for General Purpose Vibration Measurement. Accelerometer type sensor. Touch type membrane switch panel. RMS Velocity, Pk-Pk Displacement. Portable and compact unit. Economical, easy to use. Analog Display Surface-mount technology for high reliability. Rugged, suitable for industrial use

Vibration Meters, Transmitter, plcs, vibration analyzer, vibration monitors

vibration checking instrument, Industrial Fans, Bag Filter, Silencer

Noise Dosimeter, Distance Measuring Sensor, shrinkage tester

Sound Level Meter, dry block temperature calibrator

Sound Level Meters, needle files, Ball Bearings, Coated Blades

Sound Level Meter, automotive balance correcting system, balancing machines

Din Rail Moving Iron Meter