Special Purpose Paints Dealers in Chennai

NC Thinner, Thinner Solvent, Enamel Thinner, Fuel Oil Additive

• Color: Blue, Orange, Pink, White
• Type: Zinc Phosphate Primer

Excellent corrosion resistance Chemical resistant smooth finish excellent bonding quick dry

• Finish: Matt
• Vehicle Type: Epoxy
• Specific Gravity: 1.30 + 0.05
• Flash Point ° (IS101/1987 Part 1,Sece): 7 30°C
• Recommended Thickness: 50-75 microns
• Stability of Thinned Primer: 24 hours
• Fire Hazard Class: Flammable
• Shade: Grey
• Method of Application: Brush or spray

1-PACK EPOXY PRIMER INDICUS® 1-PACK EPOXY PRIMER is a protective coating that offers excellent corrosion protection for ferrous surfaces in moderate to highly corrosive environments. Areas of ApplicationINDICUS 1-PACK EPOXY PRIMER can be used: on ferrous and surface treated non-ferrous metal works ininterior and exterior areas  

• Brand Name: Cico
• Features: Features tough,flexible,hard-wearing surface with waterproofing
• Usage/Application: Surface treatment,Protecting,Waterproofing and repairing concrete and masonry
• Packaging Size: 20kg
• pH Value: Greater than 7
• Shelf Life: 12 Months
• Storage Condition: Cool and Dry Place

• Color: Grey
• Packaging Size: 1-5 L, 10-15 L, 15-20 L, 20-25 L, 5-10 L
• State: Liquid
• Finish: High Gloss
• Abrasion Resistance: Yes
• Water Resistance: Yes
• Method of Application: Brush, Spray, Roll

Keeping in mind the precise demands of clients, we offer a wide range of Water Based Varnish. These are finely processed under the firm direction of experienced quality controllers at our vendor’s end. Our products are acclaimed for accurate composition, reliability and longer shelf life. We ensure high effectiveness and quick and fast processing of these products.   Features:   Accurate composition Longer shelf life Non toxicity

• Type: Paint
• Certification: ISO9001:2008
• Application: Brush, Roller
• Color: Black and grey
• State: Liquid
• Packaging Type: Can
• Finish: High Gloss, High Sheen, Mild Sheen, Soft Sheen
• Packaging Size: 1-5 L, 10-15 L, 15-20 L, 20-25 L
• Country of Origin: India

We provide electrodepositing coating in two types Anodic Electro-Deposition (AED) and Cathodic Electro-Deposition (CED). We offer paints in Epoxy and acrylic base.   Our CED and AED paint Advantages • Increased throwing power(about 50% more) with better capability for the paint to reach recessed and critical corrosion prone areas, which might not be possible with anodic system  • Smoother film deposit as the film flows smoothly during baking, and so lesser necessity of rectification work that ensures a smoother final finish • With its better corrosion resistance, the film thickness can be reduced (up to half in comparison with the film thickness of anodic paint).  • Less problem in maintenance of the quality of paint as the cathodic paint has a greater resistance to bacteria.

nnovative fire safeguard product from 3M that prevents the spread of fire, smoke, toxic fumes and moisture for approx. four hours.3M Fire Barrier Moldable Putty+ is a 100%, solid intumescent fire stop product that restores the integrity of fire-rated building constructions.

• Type: Spray Paints
• Application: Machines, Vehicles
• Color: Black, Green, Grey, Orange, Red, White, Yellow
• Feature: Easy To Use, Protection Against Corrosion, Quick Drying
• Condition: New
• State: Liquid
• Packaging Type: Can
• Packaging Size: 440 ML
• Country of Origin: India
• Brand Name: Com-paint

To retard the setting time of concrete to allow concreting under conditions of high ambient temperatures and placing of mass concrete  Increases setting time of concrete   Excellent for large concrete pours.   Provides up to 1/8th – 1/4th (3-6mm) depth retardation   Etch depth can be adjusted as desired.   Can be used in high temperatures.   Prevents cracks in concrete where the formwork de-forms.   Delivery of concrete can be made over long distances from the premix concrete plant. 100 – 400g / 100kg of cementitious materials.   Turbonol CSR must be added during the concrete mixing process at the same time as the mixing water.   For spray applications, dilute 1:10 - 20 and spray on the surface.   Optimum dosage must be determined by site or laboratory tests.

• Type: Pure
• Color: White
• State: Powder
• Packaging Type: Plastic Packet
• Packaging Size: 25kg, 50kg
• Application: Construction

We provide one of the best Fire Retardant Paints for your buildings. With its additional protective layers, the paint swells at high temperatures to provide thermal insulation by creating a porous layer on the metal and between the surfaces. This does not have any odour and is eco-friendly and explosion safe. This provides more than 25 years of protection and is available with us at affordableprices.Titan: Which can be used as a fire retardant coating for all steel structures & concrete interior areas not exposed to weathering & fully preserves the configuration of the treated surface. Description:"Titan" fire-retardant paint is a suspension of heat-resistant, gasforming, foaming additives with inorganic fillers in the dispersion ofPolyacrylates : The paint swells at high temperature to form a thermal insulationporous layer on the metal and beton surfaces. Coating based on fire-retardant paint Titan" with an additional protectivedecorativesurface layer: Thermal insulating porous layer formedafter swelling of the coatings based on fire retardant paint "Titan" after fire exposure. Titan can be used as a Fire retardant coating for all surfaces of Steel structures and Concrete in interior Areas without exposure to weathering.Fire-retardant paint "Titan" is used for the flame-retardant treatment of steel and beton primed structures. Up to 120 minutes fire resistance operating in interior (up to 150 minutes for beton surfaces). For fire protection of steel structures outside on surfaces not exposed to direct rainfall, "Titan" is used with an additional protective and decorative surface finishing. Fully preserves the configuration of the treated surface. Eco clean, non-toxic, fire and explosion safe. No sharp odor. More than 25 years of fire protection.Fire-retardant paint "TITAN" meets the requirements of the Technical Regulations on fire safety requirements (Federal Law of 22.07.2008 â�� 123-FZ), GOST 53295-2009 "Means of fire protection for steel structures."The coating is applied on primed steel structures (columns, beams, overlaps, connections, etc.). Check the condition and quality of previously applied anticorrosion coating, the time of its application. If necessary, repair the corrosion-resistant coating. Use the same materialat the repair (glyptal based anticorrosive primers are recommended) Ambient temperature - min +5 ° C; Relative humidity - 85%; The treated surface temperature should be above the dew point of not less than 3 ° C. The application of paint performed by mechanical means, using airless aggregatesspraying high pressure plunger pump (type «WAGNER HC 960E»), or manually (brush orroller).The paint is thoroughly mixed with an electric mixer for 3 – 5 minutes before applying Fire-retardant paint is applied in layers, in several passes. Depending on the method ofapplication a layer thickness of the dried coating may be 100-400 microns.It's recommended to apply paint wet film of 400-600 microns thickness in one pass.Recoating is carried out after 2-6 hours (depending on the application conditions).Final drying: 1 - 4 days. Coating based on the fire-retardant paint "Titan" can be operated in therange of temperatures from – 60 °C to +60 °C at the relative humidity of 85%.In case if relative humidity is more 85% , the use of additional protective anddecorative surface layer must be applied in accordance with the "Technologicalinstruction # 001-I-U / 8 on application and exploitation of fire retardant paint "Titan".Packing: plastic or metal pails of 25 kg.Transportation: at temperature above 0 °C.Shelf life: in the manufacturer's packaging in a dry place at a temperature above 5 °C –12 months.

A well known Paints supplying company.

• Color: Brown, Mulberry, Silver
• Form: Liquid
• Certification: ISO 9001:2008
• Packaging Type: Glass Bottle
• Packaging Size: 100ml, 10ml, 50ml
• Type: Nail Polish
• Shelf Life: 6months

  Product details Is Discontinued By Manufacturer ‏ : ‎ Yes Product Dimensions ‏ : ‎ 3.3 x 2.67 x 8.26 cm; 14.17 Grams Date First Available ‏ : ‎ 13 June 2014 Manufacturer ‏ : ‎ O.P.I ASIN ‏ : ‎ B004220C6E Item model number ‏ : ‎ 22001008000 Country of Origin ‏ : ‎ USA Manufacturer ‏ : ‎ O.P.I Item Weight ‏ : ‎ 14.2 g Item Dimensions LxWxH ‏ : ‎ 33 x 27 x 83 Millimeters Net Quantity ‏ : ‎ 15.0 millilitre Included Components ‏ : ‎ Base Coat Generic Name ‏ : ‎ Base Coat

Paint brushes are used for applying ink or paint. These brushes are usually made by clamping the bristles to a handle with a ferrule. Short handled brushes are for watercolor or ink painting while the long handled brushes are for oil or acrylic paint.

Acrylic PVC Paints that we manufacture, export and supply are known for providing excellent flexibility and moisture resistant. Our Acrylic PVC Paints are available in different vibrant colors. Our Acrylic PVC Paints are composed of high performance acrylic suitable pigments. These can be easily applied using brush, airless or conventional spray. Furthermore, our Acrylic PVC Paints are widely demanded in plastic industries, automobile industries, electronic manufacturers, toy industries, etc. Details : Recommended Thinner : ContiPaints® Thinner 71002 Packing Sizes : 1 Ltr , 4 Ltrs & 20 Ltrs

• Suitable Surface: Concrete
• Timing: At Least 4-5 Hours Before the Application of Road Marking Paint
• Packing Size: 200 ml, 400 ml
• Quality: Optimum
• Instruction: Ensure that the road surface is clean, free from dust and moisture.
• Advantage: Improves Bonding

Another accompaniment specifically used on concrete surfaces. Recommended to be applied at least 4-5 hours before the application of road marking paint for better bonding and smooth application on Concrete surfaces.DIRECTIONS FOR USE Heat the material to 180 - 200°C in the pre - heater with adequate agitation till the material becomes a homogenized liquid. Ensure that the road surface is clean, free from dust and moisture. Heavy deposits of paint require removal. For aged asphalt roads and concrete roads, a primer coat is recommended before 20-30 minutes for proper bonding of the material with the road surface. Ensure that the primer is thoroughly dry and void of solvent prior to application of the thermoplastic material. Ensure temperature of 180 – 200°C and adequate agitation during application. Do not hold thermoplastic above 180°C for more than 6 hours. Do not heat the material above 220°C at any point of time . Change in colour indicates that the material has been scorched owing to overheating and needs to be discarded . Drop - on glass beads must be immediately deposited after thermoplastic application.

We are backed by a modern transportation facility that ensures safe delivery of the orders at required destinations. We are the most promising name when it comes to wall putty.

thinner, Low Aromatic White Spirit, Mix Xylene, Vinyl Acetate Monomer

phycocyanin pigment, Spirulina

• Size: 4inch
• Type: Paint Brushes

largest manufacturer of paint brushes, importer of spray gun, distributors and importers for paint spray can..

Relacryl is an anionic dispersion used for a great variety of * for manufacturing paint with very high dry and wet rub fastness. * coatings * textured finishes and surface, * architectural finishes, * interior exterior paints, * primers, * plastic paints , * grouts, * binder for textile and paper coatings etc... .

• Country of Origin: India
• Type: Primer Paint
• Application: Roller
• Color: White
• State: Liquid
• Packaging Type: Can
• Finish: High Sheen
• Packaging Size: 1-5 L
• Other Names: Annai Paints
• Raw Material: Mines Powder
• Country of Origin: India
• Brand: Annai paints
• Material: Paints
• Size: 4 Liter