Sri Vinayaga Bag Industries Chennai, Tamil Nadu

Pattern : Printed

Material : Polyester

We offer Tempreature Calibration Bath (dry Block Type Tb - 600). TEMPERATURE CALIBRATION BATH (DRY BLOCK TYPE TB - 600 ) DESCRIPTION The Test instrument TB – 600 consist of two single enclosures. Front size 150 X 150 mm & 280 mm depth. They are connected with each other & equipped with a portable handle. The left enclosure contains a block with bore diameter of 18.5 mm & 110 mm depth which can reached from the top, face the reception of the test piece. In this block the heating cartridge & temperature sensor for the determination of the block temperature are installed accesses from the bottom. The right enclosure contains: PID controller for control of the block temperature in which we can see the set value & present temperature of the block. Power switches & power on indicator Fan ON OFF switch for cooling the block.

We offer Piston Type Pulsation Snubber. A. Female Part FEATURES : B. Male Part, 01, 02, 03 Type-01 for ¼ inch BSP, 14 inch NPT and 01, 02, 03 Piston assembly M-12 connections. A and B will be 28 mm Type-02 for ½ inch BSP ½ inch NPT and 38 hexagonal for Type 01, inch NPT and M-20 connections. And 22 mm for Type 02 Piston assembly 1 for less viscosity and 3 for higher viscosity. Piston 2 is installed when the time of snubber assembly. To change the pistons unscrew and remove the female part (B) from the male part (A)and change the piston as required depending fluid viscosity. Snubber can be used for pressure vacuum and compound gauges and material should be selected depending on application. While placing an order, please specify Type, material and thread connection.

Type : Fancy Luggage Bags, Luggage Bags

Material : Canavas, Cotton, Jute, Nylon, Plastic, Polyster

Style : Fashionable, Modern

Color : Multicolor

Feature : Attractive Designs, Easy Washable, Impeccable Finish, Waterproof

Technics : Attractive Pattern, Handloom, Washed, Yarn Dyed

Pattern : Checked, Plain, Printed

Condition : New, Used

Pattern : Plain

Color : Black

Material : Leather

We offer Ji Bourdon Type Pressure Gauges. Dial size : 40, 50, 63, 100, 150, 200, 250mm Case : Pressed steel or stainless Steel Mounting : Surface, Direct, Back or Panel Range : 760mm Hg to 0 vaccum, 0 to 700Kgcm² Comp-760mm Hg to 28 Kgcm2 or Bar & Psi Scales. Working parts : Non ferrous Connections : 18", 14", 38" ,12" BSP, NPT, OR Metric Threads ACCURACY : +- 2% FSD Note : Glycerine filled on request. Ammonia & Oxygen Gauges also avaliable.

We offer Ji Bimetal Dial Thermometers. Dial size : 63, 100, 150 mm Case : Pressed Steel Chrome plated or SS Mounting : Back Horizontal or Bottom Vertical Bulb & Stem : 2", 3", 6", 9", 12" std. Upto 48" long Connection 12" BSP (M) or as required Bulb, Stem & Connection Material : M.S.Chrome plated or SS Bulb & Stem dia : 14", 38" Range : +- 2% FSD Accuracy : -20 to 60C to upto 600C

We offer Every Angle Dial Thermometers. Dial size : 63, 100, 150 mm Case : Pressed Steel Chrome plated or SS Mounting : All Every Angle, 180 deg. Rotation Bulb & Stem : 2",3",6",9",12", std. To upto 48" long Connection : 12" BSP(M) or as required Bulb, Stem & Connection Material : M.S Chrome plated or SS Stem dia : 14", 38" or as required Range : -25 to 60C to upto 600C Accuracy : +- 1.5% FSD

We offer Gauge Cock. A. Body FEATURES : B. Instrument Connection. Both round and square models available C. Process Connection. Teflon seals (PTFE) D. 65 mm. available in 2-way vent hole type and 3-way E. 60 mm. cock F. In 3-Way Cock Thread Connection 2-way vent hole. CONNECTIONS : Provided threads as per thread chart and also can be requirement. MATERIAL : SS 316, SS 304, Brass. : Can Be Provided Specify Requirement. ORDERING : Material, INFORMATION Thread Connection, And Type. PRESSURE : 0 To 60 kgcm² TEMPERATURE : 0 To 60°C

We are offering digital pressure gauge low range. The digi gauge must be exercised and re-zeroed whenever exposed to significant environmental conditions to achieve these specifications. To exercise the gauge, cycle the digi gauge between zero and pressure of interest. A properly exercised gauge will return to perfect zero reading. Exposure to environmental extremes of temperature, shock and or vibration may warrant a more frequent re-certification period. Power : 7.5v duracell type mn2400 lr03, 5 nos. Connection : 14” bsp male (other on request by adopter) over pressure: 125% of specified range temperature - storage : -40 0c to +70 0c operating : 0-60 0c enclosure : aluminium anodized, light weight. Display : 15 mm heigh lcd showing pressure, units & low batt.

We offer Dead Weight Pressure Gauges Tester. Use of in the Dead Weight Pressure Gauge Tester. The main components of a Dead Weight Pressure Gauge Tester are: Screw Pump to generate pressure in the circuit. Of adequate capacity and operated by turning the spoked handle. Permits easy and accurate setting of pressure. Free Piston Assembly of special steel, hardened, tempered, ground and lapped to accurate size and very fine surface finish to provide true floating action. Set of Weights directly marked in convenient values of pressure and easily stacked on the carrier weight. Available in eitherand kgfcm2, bar Cbfin² units. Other units on request. Storage box provided. Incremental weights to provide smaller steps available at extra cost for all models mentioned below. Gauge Connector of 12" BSP (female) union for connecting gauge to be tested. Other sizes of gauges can be connected by using adaptors. Baseplate of sturdy construction provided with legs and levelling screws. The entire circuit is protected by a Sheet Metal Cover.

Material : Polyester

Pattern : Printed

Country of Origin : Made in India

We offer Acrylic Single Limbed Manometer. Item : Single limbed acrylic tube manometer Range : 0 – 30 mm in Wc Hg with 1 mm Wc Hg 0 – 50 mm in Wc Hg with 1 mm Wc Hg 0 – 100 mm in Wc Hg with 1 mm Wc Hg 0 – 150 mm in Wc Hg with 1 mm Wc Hg 0 – 200 mm in Wc Hg with 1 mm Wc Hg 0 – 300 mm in Wc Hg with 1 mm Wc Hg 0 – 500 mm in Wc Hg with 1 mm Wc Hg OR As required End fittings : ¼” PP SS nozzles Description : Single limbed acrylic tube block with calibrated scale Mounting : Wall mounting Make : Ji Accuracy : +- 1% FSD

We offer Acrylic Body Rotameter. FEATURES: Acrylic Rotameters are precision machined from clear acrylic block and fitted with needle valves stream lined in appearance. They are designed to give maximum Accuracy visibility & Ruggedness. FLOATS: Stainless steel, Teflon, PVC or as per requirement. In bigger models guide rods are provided for better stability. METERING VALVE: For Accurate flow control precision machined needle type valves are ACCURACY: Standard Accuracy of 1.5 to 1% at full Scale. Better accuracy on specific requirement. FITTINGS: Top Bottom or Rear as per requirement in S.S. Screwed, Nozzle, with Suitable "0" Rings to avoid leakage. CALIBRATION: Carried out at works individualy using air and water at standard condition. Reliable impirical conversion, are used to calibrate for other fluids. INSTALLATION: Rotameter are ideal for direct Panel mounting because of their neat modular apperance, online is also possible.