SRIRAM POWER SAVER Sholinganallur, Chennai, Tamil Nadu

Welding ideal energy saver is a electronics sensing unit its the detects the voltages across the electrode gun and these non-weld periods and switches off the power to the welding transformer by using a contactor (contactor not supplied by us). After preset time interval and hence saves power during these periods. When welding operator need to touch the electrode to the material to be welded and the unit instantly starts the weld, which then can be carried on continuously.

Facilities: 1. Easy of connections 2. Indications of hours and minutes in seven segment led, 3. Relay on and repeat function status of led, 4. Battery back up 7 days, 5. Clock accuracy plus or minus 30 sec per month.

The starting current drawn by an induction motor is directly proportional to the applied voltage. The Soft Starter is designed to make it possible to choose the lowest voltage possible (pedestal voltage) at which the motor can be started - the lowest voltage being dependent on the load on the motor. The voltage is ramped up from this pedestal level to full voltage in the set time (selectable- 2 to 10 seconds). Pedestal voltage and ramp time can be set at site. It is also possible to provide controlled torque soft start with current limit option. Soft stop feature can also be provided, as optional.

Injection motor solid state energy saver is a electronic unit .it comes along with current transformer. The current transformer is to designed and match the each capacity of full load current. The current transformer sensing line current is below 50 percentage of full load current.the energy saver unit motor is to operate in star mode and till the line current rises to 48 percentage of full load . When the sensing current reaches set current of 48 percentage i.e line current of full load injuction motor energy saver unit to operate ,the motor in delta.

Energy saving lamp controller works by delaying the trigger pulse to some point in the half cycle of the ac wave. This trigger point, from 0 to 180 degrees, is referred to as the phase angle .the scr will turn on when triggered, and remain on for the rest of the half cycle. Increasing the control fireing will cause the trigger pulse to occur earlier in the half cycle, thus delivering a greater portion of the wave to the load. (note: some rfi can be generated from the unit). We maintain the output supply voltage constant (200 volts a.c)by varying the scr firing angel automatically.

Our company has successfully expanded its business in market owing to the presented eminent quality array of dol starter panels. We design this starter panels with the support of professionals by utilizing the finest basic material, electrical components and advance technology in accordance with the predefined norms. Owing to its performance oriented and thermal proof features, this starter panel is extensively demanded in the market. Along with that, these starter panels are given to our customers at affordable rates.

A large percentage of electrical energy is utilized in running motors in industries. A wide variety of motors are used depending upon the application.Star Delta Starters are used with squirrel cage induction motors to reduce the starting current. They operate the motor in star mode at start and after the set time delay, it switches over to Delta mode and continuous to run in delta irrespective of whether the load is low or high.

We are offering air conditioner energy saver the user to turn on & off device up to 30 times. The individual on off settings are user programmable from the front panel. The repeat function allows programs to be repeated on other days. Holiday setting allows the user to execute a different set of programs on that day. The real time clock(rtc) runs on a rechargeable battery maintaining time even mains power is absent.

Energy Saving Star Delta Starter Can be used with three phase squirrel cage induction motors for starting mechanism of D.O.L Starter and Soft Starter. (A panel built with contactors and energy savers.)