STERLING VALVES AND CONTROLS Guindy, Chennai, Tamil Nadu

Special Features : Strainers come in various shapes and sizes, with their names designed in accordance with their structures. They are mostly made of aluminum and copper which makes them suitable for use with water and makes them corrosion-resistant. The most commonly used strainers are Y & Pot strainers.

Type : Y Type Strainer

Strainer Material : Metal

Valve Type : Y Type

Operating Type : Manual

Specialities : Rust Proof, Non Breakable, High Tensile, High Quality, Heat Resistance, Durable

Surface Finishing : Polished

Special Features : Improved and simplified seal installation. Excellent shearing action in fibrous fluid mediums. Allow easy field retrofitting of various product lines. Minimises problems while in servicing and installation. Assured performance irrespective of flange torque load. No need to remove actuator for replacing ball and shaft. Smaller bolt helps avoid bolt stretch and leakage in case of fire. Service life of valve is extended in the worst erosive environments.   Shutoff Rating Zero Leakage for Soft Seated & Metal Seated as per API 598 or relevant STD.

Type : Ball Valve

Material : Carbon Steeel

Color : Available In Many Colors

Feature : Casting Approved, Blow-Out-Proof

Size : 25 To 200 Mm (1 To 8inch)

Port Size : 0.1mm-5cm, 2cm-50cm

Special Features : Possess good temperature and chemical properties. Pumps and compressors or other equipment failures. Heat input from associated equipment/ external source. The set pressure is unaffected by the valve backpressure. The system can be operated at maximum working pressure. Failure of a cooling system allowing vapour or fluid to expand. An inlet nozzle to be connected to the system requiring protection. Inherently Safe Design simply can’t eliminate every pressure hazard.   Shutoff Rating : Zero Leakage for Soft Seated & Metal Seated as per API 598 or STD.

Material : Metal

End Connection : Screwed end, Flange end, Socket weld

Special Features : The piston always held by value ring in either open or closed position resulting in no vibration. It can be used as bi-directional valve. However it is preferred to install the valve such that pressure acts below the piston. Value ring used for sealing is made up of packing, hence the piston valve acts as a soft seated valve. The piston valves used in many brass instruments Also used in many stationary steam engines and steam locomotives   Shutoff Rating : Zero Leakage for Soft Seated & Metal Seated as per API 598 or relevant STD.

Material : Metal

Application : Gas Fitting, Oil Fitting, Water Fitting

Automatic Grade : Manual

Pressure : High Pressure, Low Pressure, Medium Pressure

We provide premium quality Manual Knife Gate Valve that can be availed in different grades. We are recognized as one of the Manual Knife Gate Valve Suppliers in India. Characteristic Easy to install and operate Durable Provide high performance Materials used for making the body valve : Cast Iron, Carbon Steel, Stainless Steel etc. Design As per design standard MSS SP-68 PN-10 Rating Operation Hand Wheel Operation Chain Wheel Operation Pneumatic Operation Bevel Gear Operation Hydraulic Operation Lever Operation Electric Motor Operation Drilling As per BS : 10 : 1962 - Table 'E' 'D' or 'F' PN-10 ANSI B. �l6.5 ASA Flanges Any other specifications as per requirement of customers Body hydrostatic testing : conforms to MSS SP-68 up to 600mm ; proprietary norms for higher sizes. Tough, No-corrosive Trims : The stainless steel inner body is welded to cast iron gland. The gland's poly-vinyl chloride coating provides maximum resistance to corrosion and wear. Precision-buffed stainless steel knife plate : The stainless steel knife plate is precision-buffed for tight shut-off. Its Knife-like edge cuts off and shuts off even heavy or high-viscous fluids. A choice of three different seat rings : In addition to the standard stainless steel seat ring, rubber and Teflon seat ring are available as option. Choose the one best for your fluid control requirements. Plane valve seat to resist build-up : The plane surface of the valve seat has no recesses to harbor heavy fluid deposists that could build-up and swamp the valve. Leaktight multilayer gland packing : The gland packing is Teflon-impregnated asbestos or vegetable yarn layered with moulded silicon rubber. This chemical-resistant packing provides total sealing. Bosses for positive seating : Two bosses are welde to valve seat. These press the knife plate snugly against the side of the seat ring for bubble-tight shut-off. Smooth handwheel opening/ closing : The double-thread screw on the stem makes opening/ closing smooth and speedy. Applications Pulp and Paper Industry Thermal Power Plants Suger Mills Textile Industry Sewage Plants

Size : 15 To 450 Mm (1/2 To 18inch)

Type : Gate Valve

Material : Alloy Steel

Certification : ISI Certified

Application : Gas Fitting, Oil Fitting, Water Fitting

Weight : 10-15kg

Color : Available In Many Colors

Pressure : High, Low, Medium

We provide apex quality Manual Globe Valve that is used in various Industrial applications. We are regarded as one of the flourishing Manual Globe Valve Suppliers in India.   Characteristic The valves are easy to install They have high durability High efficiency   Materials used for making the body valve : Carbon Steel, Chrome-moly Steel, Stainless Steel, Monel, Alloy20, Hastelloy B/C, PP, Teflon etc., Teflon Lined or Teflon Metal Housed.

Material : Aluminium

Certification : ISI Certified

Color : Available In Many Colors

Finishing : Coated

Special Features : Low pressure drop increases energy savings. Lower maintenance costs; fewer moving parts. Flexibility to cope with variable flow conditions. Smaller footprint than conventional check valves. Allow easy field retrofitting of various product lines. Reduce down time and loss of production due to failure. Protect pumps and compressor equipment from damage. Eliminate chatter and reduce the possibility of sudden valve failure Shutoff Rating Zero Leakage for Soft Seated & Metal Seated as per API 598 or relevant STD. Wafer Type, Flangeless, Sandwich Pattern. Suitable to mount between two flanges

Type : Industrial Valves

Material : Metal

Usage : Water Fitting

Finishing : Polished

Driving Mode : Manual

Special Features : The design complies with API 609. Blowout-proof Shaft. Range of Short-pattern and Long-pattern valves. Tight sealing and low operating torque. Design Validation Test for various valves successfully completed 10,000 cycles. Body materials: Cast Iron, SG Iron, Carbon Steel, SS 304/ CF8, SS 316/ CF8M Elastomer Seals - Black/White Nitrile, Black/White EPDM, Viton, and Silicon. Fire-Safe Design for Offset Valves. Actuator mounting pads to ISO 5211.   Shutoff Rating Zero Leakage for Soft Seated & Metal Seated as per API 598 or relevant STD.   Applicable medium : Clearwater, neutral liquid, Industrial water, Sewage, Low Corrosive Liquids

Type : Butterfly Valve

Material : Carbon Steel

Feature : Durable, Easy Maintenance.

We are known to be among the prime Suppliers of Manual Ball Valve in India. The Manual Ball Valve that we supply is available in various specifications so as to meet the clients requirements. Characteristic Highly durable Low maintenance cost High efficiency East to operate Materials used for making the body valve : Carbon Steel, Chrome-moly Steel, Stainless Steel, Monel, Alloy20, Hastelloy B/C, PP, Teflon etc., Teflon Lined or Teflon Metal Housed.

Type : Ball Valves

Application : Water Fitting, Oil Fitting, Gas Fitting

Color : Available In Many Colors

Feature : Durable, Casting Approved

Pattern : Plain

Material : Carbon Steeel

Pressure : High, Low, Medium

Size : 15 To 450 Mm (1/2 To 18inch)

We offer fine quality Globe Control Valve in various grades and specifications to meet the various requirements of the clients. We are regarded as one of the chief Globe Control Valve Suppliers in India. Characteristics Linear and Quick Opening of the valves Equal Percentage Have excellent durability Easy to operate Materials used to make the body : Carbon Steel, Chrome-moly Steel, Stainless Steel, Monel, Alloy20, Hastelloy B/C, PP, Teflon etc., Teflon Lined or Teflon Metal Housed.

Material : Aluminium

Certification : ISI Certified

Color : Available In Many Colors

Special Features Tight shut-off and vaccum ensured. Ensuring d low energy quick response flushing. Trouble free fit and forget flushing performance. Flexibility of end connections to suit applications. Non-jacketed gives user the benefit to suit process application. Valve - Actuator Mounting pad interface is designed to ISO 5211. Ensuring zero gland retention and zero gland restriction flushing. The high end operational measurement and temperature sensing   Shutoff Rating : Zero Leakage for Soft Seated & Metal Seated as per API 598 or relevant STD

Type : Industrial Valves

Material : Metal

Finishing : Coated

We offer superlative quality Diaphragm Control Valve. We are among the leading Diaphragm Control Valve Suppliers in India. Characteristics Easy On/Off, Throttling Highly durable Efficient performance Easy operation Materials used to make the body : Cast Iron (IS 210 grade FG 200), Cast Steel, Other alloys on request.

Material : Carbon Steeel

Color : Available In Many Colors

Automatic Grade : Automatic

Size : 5/6inch, 6/7inch

Special Features : The design complies with API 6D, API 599. Blowout-proof Shaft. Tight sealing and low operating torque, Cavity free. Minimises problems while in servicing and installation. Easy in-line adjustability. Actuator mounting pads to ISO 5211.   Shutoff Rating : Zero Leakage for Soft Seated & Metal Seated as per API 598 or relevant STD.

Material : Cast Iron

Application : Gas Fitting, Oil Fitting, Water Fitting

Pressure : High, Low, Medium

Special Features : The design complies with API 609. Blowout-proof Shaft. Range of Short-pattern and Long-pattern valves. Tight sealing and low operating torque. Design Validation Test for various valves successfully completed 10,000 cycles. Body materials: Cast Iron, SG Iron, Carbon Steel, SS 304/ CF8, SS 316/ CF8M Elastomer Seals - Black/White Nitrile, Black/White EPDM, Viton, and Silicon. Fire-Safe Design for Offset Valves. Actuator mounting pads to ISO 5211.   Shutoff Rating Zero Leakage for Soft Seated & Metal Seated as per API 598 or relevant STD.   Applicable medium： Clearwater, neutral liquid, Industrial water, Sewage, Low Corrosive Liquids

Number Of Way : 2way, 3way

Pressure Rating : CAT A Centric Disc:PN10, PN16, PN25, and Class 150, CAT B Offset Disc: Class 150-Class 900

Operations : MANUAL : Bare-shaft, hand wheel & Gearbox. AUTOMATION : Electric, Pneumatic, and Hydraulic Actuators   Special Features The design ensures zero leakage from the valve stem. Energy saver to minimizing energy losses due to leakage. Operating and maintenance cost is considerably reduced. Improve the safety, where is bellows valve has been installed. A plug can be connected the bellows to monitor performance. Prevent any leakage to meet the international sealing standards. Compact design that assure great resistance against piping forces. Special design for sensitive control assured for the valve service life.   Shutoff Rating : Zero Leakage for Soft Seated & Metal Seated as per API 598 or relevant STD.

Material : Metal

Automatic Grade : Manual and Automatic

Valve Size : DN 6 to DN 250 (1/2″ to 12″)

Pressure Rating : Floating type: PN20, PN 40,Class 150 to Class 2500

Special Features Tight shut-off obtained against any differential pressures. High rangeability, characterization, and precise modulation. Allows to use fast actuating to perform emergency operation High capacity unrestricted flow passage in fully open position. Special design for sensitive control assures that scraping action. Compact design that assures great resistance against piping forces Special design for sensitive control assured for the valve service life Low emission to meet Fugitive Emission & “TA-Luft” requirements   Versatile Range: Single, two and three piece constructions Full-bore and regular-bore designs Soft and metal-seated Offered in carbon steel, stainless steel and duplex stainless steels Screwed, socket-weld and flanged ends ASME classes up to 2500 Variety of actuated options

Material : Brass