Submersible Pumps Dealers in Chennai

Types Openwell Submersible Horizontal Type Openwell Submersible Vertical Type   Features Made out of high grade cast iron material S.S. Shaft and Cast Iron impellers Two Water Lubricated carbon bearings used for longer life and smooth operation. 2880 RPM – 415V, 50 Hz Three phase water cooled motors Applications Used in openwell and sump Installed inside a sump or in hanging position inside deep openwells High head & high discharge applications Agriculture lift irrigation,multistoreyed building, Hospitals etc.

• Application: Sewage
• Driven Type: Battery Operated ,Electric, Fuel, Hydraulic, Oil, Pneumatic
• Condition: New,Old
• Color: Grey , Silver
• Voltage: 110V, 220V, 280V,380V, 440V
• Pressure: High Pressure , Low Pressure, Medium Pressure
• Weight: 100-200kg, 200-300kg
•  OtherAutomatic Grade: Semi-Automatic, Fully Automatic, Manually Automatic

• Brand Name: BIMM
• Condition: New
• Automatic Grade: Fully Automatic
• Power: 1-3kw
• Application: PPUMP CONTROLLER
• Voltage: 220V

Operation of Timer based Direct ON Sump pump controller for sump tank and OH tank ·         Fully automatic water level controller connecting sump tank and over head tank maintaining  full OH tank as long as  water available in the sump ·         1 sensor will be put at OH tank at 90% (High)  just below overflow level ·         2 more sensors will be put in sump tank at 10 % just above suction  head called low   and  at 20% called high levels ·         Pump starts  in timer  mode when water is available above 20% in the  sump and OH tank is not Full. Pump runs for the preset ON time OR  stops when water reaches Full before preset ON time. ·         Pump goes to OFF for the preset OFF time ·         Pump also stops if water falls below low sensor in the sump as preventive dry run protection. ·         Pump does not start after preset OFF time if water is not above  2 sensors in the sump ·         Pump  will not start if any of the 3 sensor wires  is broken ·         No airlock or dry RUN since pump stops before water falls below suction ·         It comes with Micro controller Technology, maintenance free magnetic sensors, FR4 doubled sided 1.6mm PCB with green mask and 70 micron thick copper tracks. ·         12 months warranty, direct from manufacturer including controller and sensors  

• Voltage: 440V
• Power: Electric
• Brand Name: Abb Siemens
• Material: Motor induction
• Pressure: High, Industrial
• Application: Applications

• Country of Origin: Made in India
• Brand: Teryair
• Usage/Application: Submersible
• Model Name/Number: SP-10
• Required Air Pressure: 90 PSI (6.3 Kg/cm2)
• MOC+Elastomers: Graded Cast Iron
• Max. Delivery : 800 LPM

• Type: Submersible Pumps
• Application: Industrial
• Color: MUlticolor
• Voltage: 110V, 220V, 380V, 440V
• Fuel: Electric
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw, 9-12kw
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Structure: Diaphragm Pump, Gear Pump, Single Stage Pump
• Warrenty: 1 Year, 2 Years

• Features: Consistency, Quality tested, Precisely engineered

FEATURES High grade cast iron bearing housing and pump casing Gun metal impellers and bushes for longer life Stainless steel couplings, bolts and nuts Carbon thrust bearing for low voltage and quick start Wet type winding wire Application Installation inside borewells above 6″ For lift irrigation system Drip and springler irrigation Industrial and multi – storeyed buildings Booster pumps for long distance water lifting

• Head: Maximum 100M
• Motor Type: Squirrel cage motor of wet type
• Voltage: 415V, 50Hz, AC Three phase
• Power Range: 3.0HP to 35.0 HP
• Speed: 2800RPM
• Discharge: Maximum 2150 LPM

Features     Better PerfomanceHigh Cast Iron BodyDynamically balanced Rotor & ImpllersGunmetal / Cast Iron Impellers for higher effficiency   Application     Agriculture Lands and High Store BuildingsHighly Discharge water Filling for Sump to overhead TankFlats, Apartments,Hotels, Hospitals & Commercial Water SupplyDrip and Sprinkler Irrigation SystemsWater Cooling circulating systems.

• Brand Name: GREACH JTP
• 10W TO 200W: 1800L/H TO 16000L/H
• LOW ELECTRICITY: HIGH PERFORMANCE
• LATEST TECHNOLOGY: LONG LIFE

We offer Jtp series submersible water circulation pumps are new and 70% energy saving models. Widly useing for aquarium, aquaculture,machinery assembly , fountains. This pumps are made by german technology , saves more power,working at low voltage, auto cut off mode,if no water. Plug and play model. No any complications for installations.

• Number Of Stages: Single-stage Pump
• Motor Horse Power: Less than 1 HP
• Type: Borewell
• Motor Phase: Single Phase
• Brand: Crompton

• Features: Durability , High efficiency, Installation flexibility, High-pressure capabilities, cost-effectiveness.
• Applications: Construction sites, Excavations, Tunnels, Fish ponds, Drainage pits.

• Type: Submersible
• Certification: CE Certified
• Application: Industrial
• Voltage: 220V
• Fuel: Electric
• Automatic Grade: Automatic
• Power: 1-3kw
• Warranty: 1 Year

We are the main supplier of this product.

• Power Source: Engine & Electric
• Motor Phase: Three Phase
• Type Of End Use: Domestic
• Country of Origin: Made in India
• Model Name/Number: CW / CWC / BW / SW
• Brand: Kirloskar
• Automation Grade: Semi-Automatic
• HP: 4hp to 120HP

• Phase: Single
• Power: 0.8 To 2 HP
• Brand: Besten
• Mechanical Seal: Ceramic ans Graphite
• Pump Option: Horizontal Multistage
• Max Suction: 25 HP
• Delivery: 45 To 120 Feet
• Pump Adapter: Cast Iron,Stainless Steel Pump Casing.
• Shaft: High quality Stainless steel
•  :  

We have in store for our clients, a quality proven range of distribution systems ; that is used    for uniform collection of the feed water owing to its larger area of collection.    These distribution systems are constructed using high-grade material and are fitted with    world class components to make sure that they work efficiently at client's end. These power distribution systems yield higher efficiency and have longer life. These distribution systems are easy to assemble and install systems are integrated with perforated pipe laterals that allow easy channeling of water flow.Available in varied specifications, these systems allow uniform distribution of the backwash water and air.   

We offer Pneumatic Submersible Pump .Known for its excellent performance and advanced technology, our Pneumatic Submersible Pump (SP 25) is highly demanded by the nationwide clients. We are the major Pneumatic Submersible Pump (SP 25) Importer and Supplier. Specifications Net Weight35 KgsHeight430 MMMinimum OpeningPump Will Enter210 mm x 305 mmAir Inlet¾" NptAir Outlet1½"" BsppAir Consumption3.8 m3min.RecommendedHose Size19 mm (34")Fluid InletscreenFluid Outlet2½" NPT

Texmo Bore well compressor pumps are designed for drawing water from deep bore wells of diameter over 4 inches. They are coupled with high quality motors to ensure efficient performance. Also available in Monobloc versions where the motor and compressor are assembled into a single integral unit.

Submersible Motor Pump Mono block Motor Pumb Industrial Motor VFD Drives, Induction Motor

Applications Rural and Urban Drinking Water Installations. Water Supplies for High Raise Buildings. Lawn & Garden Watering. Water Circulating Systems. Agricultural – Lift, Sprinkler and Drip Irrigation. Industrial Service Water Supply Schemes. Special Features Ingenious hydraulic design ensures better efficiencies over a wide range of heads and discharges, varying between 60% and 140% of duty points. This means high energy saving even at a wide variation of water level in the bores. Easy interchangeability of any of our motor with any of our pump is possible because of standardization of the mounting dimensions. Maximum outside Diameter is 136mm only. Easy for installation even in crooked bores of 150mm size(6″). Water filling of motor is very simple. Special care is taken during stator winding, to withstand field conditions. Lowest vibration and wear due to intermittent bearings. This ensures longer life of the pump. Because of special cooling arrangement in the motor, the winding temperature raise is kept to the minimum, even at extreme voltage fluctuations. Unique design of bearings and thrust bearings increases the efficiency. Motor The Motor is squirrel cage induction motor, totally enclosed and water filled. It is designed for 300/440v on 3 phase 50 cycles AC supply with a speed of 2865RPM. Body is made of heavy duty steel pipe, treated with anti-corrosive lining to prevent rust formation. High quality water resistant polymer insulated wires are used for longer life. High tensile steel rotor shaft with good quality laminations, epoxy coated and baked for rust prevention. Thrust bearings are of special design and special lead-tin bronze & Teflon bearing bushes are used for high wear resistance. The winding and bearing bushes are cooled and lubricated by pure water, filled in the motor before installation. The motor is protected from well water, sand and foreign materials. Motors conform to IS 9283-1971. Standard Features Most modern and latest in design. All the units are thoroughly tested for field conditions. Superior design materials & manufacturing processes assure a longer life. Easy installation. High Efficiencies – better than Internationalvalues, leading to energy saving. Silent, Vibration- free running. The components are made of selective materials under strict quality control. Manufactured by ISO 9001/14001 and OHSAS 18001 Company Effective After – sales service. Pump The impellers are of bronze or glass filled poly – carbonate/GFN2 material for high wear resistance. Impellers are dynamically balanced individually and also after assembly on shaft. Special lead-tin bronze metal and high nitrile rubber bearing bushes are used for high wear resistance and longer life. A strainer is provided at inlet to prevent foreign materials getting into the pump. A non-return valve is provided to prevent back-flow of water. Submersible pumpsets conform to IS    Standard Features Most modern and latest in design. All the units are thoroughly tested for field conditions. Superior design materials & manufacturing processes assure a longer life. Easy installation. High Efficiencies – better than Internationalvalues, leading to energy saving. Silent, Vibration- free running. The components are made of selective materials under strict quality control. Manufactured by ISO 9001/14001 and OHSAS 18001 Company Effective After – sales service. Pump The impellers are of bronze or glass filled poly – carbonate/GFN2 material for high wear resistance. Impellers are dynamically balanced individually and also after assembly on shaft. Special lead-tin bronze metal and high nitrile rubber bearing bushes are used for high wear resistance and longer life. A strainer is provided at inlet to prevent foreign materials getting into the pump. A non-return valve is provided to prevent back-flow of water. Submersible pumpsets conform to IS 8034-1989.

• Type: Open Well Submersible Pump
• Application: Industrial
• Color: MUlticolor
• Voltage: 110V, 220V, 380V, 440V
• Fuel: Diesel, Electric
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw, 9-12kw
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Warrenty: 1 Year, 2 Years

Special Features:• High operating efficiency resulting low power consumption • Easy installation requiring no foundation and pump house arrangements• Maintenance free operation due to water lubricated bearings• Noiseless Operation, Less operational and maintenance cost• Rewindable motor.Construction Details:MOTOR : REEJA submersible motors are wet type, water lubricated, water cooled, rewindable motor, capable of withstanding wide voltage fluctuations. Specially designed thrust bearings are used that can withstand axial thrust loads with minimum wear & tear. The pump shaft and motor shaft are rigidly connected by a coupling sleeve. The stator is wound with special water proof Bi- axially oriented synthetic film insulated winding wires. Motor sealing is made by means of gromments, O’ rings and oil seal to avoid ingress of well water into the motor. Pressure compensating diaphram is provided to guard the pressure and volume variation of the water inside the motor.PUMP : REEJA submersible pump is a multistage centrifugal pump. There are two types of pump. The radial flow type for high heads & low discharge and mixed flow type for high discharges and low head. The pump bearings are water lubricated. The suction inlet is situated between the pump & the motor

• Maximum Discharge Flow: 100 - 500 LPM
• Motor Phase: Single Phase
• Power Source: AC Powered
• Head (Water Lifting Capacity): 15 to 50 m
• Motor Horsepower: 1 - 3 HP

• Number Of Stages: Multi Stage Pump
• Application: water treatment
• Type: Borewell
• Motor Phase: Three Phase
• Head: 15 to 50 m
• Country of Origin: Made in India
• Motor Horsepower: 5 - 20 HP
• Brand Name: CRI
• Model Name/Number: 10-16

• Type: Borewell Submersible Pumps
• Application: Agriculture, Industrial
• Voltage: 110V, 220V, 380V, 440V
• Fuel: Electric
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw, 9-12kw
• Pressure: Low Pressure, Medium Pressure
• Warrenty: 1 Year, 2 Years
• Color: MUlticolor

• Material: Mild Steel
• Pressure: 36 Kg\\ cm2
• Model Name/Number: NEMO
• Brand: NETZSCH
• Capacity: 120 m3\\ hr
• Temperature: 140 C
• Viscosity: 1,20,000 CST
• Machine body: Stainless steel
• Features: Self-priming, Large ball passage, Intermittent dry run capabilities

• Power: 2 HP
• Brand Name: Crompton
• Power Source: Electric
• Type Of End Use: Industrial
• Head: 12-18 Mtrs
• Discharge Range: 410-210 LPM
• Automation Grade: Semi-Automatic
• Suct X Del: 40X40 mm
• Solid Capacity: 8.50 mm
• RPM Speed: 2830

• Brand Name: Usha
• Motor Horse Power: 2 - 5 HP
• Engine Horse Power: 5 HP
• Type Of End Use: Agricultural
• Power Source: Diesel
• Color: Green
• Pump Size: 3x3
• Motor Speed: 3000
• Automation Grade: Semi-Automatic