Surge Protection Device Dealers in Chennai

• Country of Origin: India
• Material: Metal
• Power Source: Electric
• Voltage: 380 V
• Material: Mild Steel
• Rated Current: From 32a upto 1000a
• Phase: Three Phase
• Frequency: 50 Hz
• Brand Name: Volt-on

• Country of Origin: Turkey

Our organization has risen to prominence in offering ESE Lightning Arrester of best range and quality specification to our clients. It is designed to bear the effects of severe lightning and thunder with ease and protects buildings and apartments from its devastating effects. It is mostly installed at top of buildings and is completely safe both in its usage and its installation. Most importantly; we assure timely delivery of ESE Lightning Arrester. Features: •Easy to use •Anti-corrosive •Withstand adverse conditions

We offer a wide assortment of lightening arresters to our esteemed clients. Our products are widely used in household & industries. Lightening protection systems are installed on structures, trees, monuments, bridges and even water vessels to protect from lightening damage. Customers can avail the product from us at very competitive prices.

• Type: Polymeric Surge Arresters
• Material: Polymeric
• Certification: ISI Certified
• Color: Grey
• Condition: New

e offer deal in a wide range of Power Lighting Arrestors/Surge Arrestors. 9kv, 12kv, 30kv, 33kv

• Color: eny colour
• Brand Name: mootek
• Weight: 5kg

Introduction: IEC61000-4-5 and ITU-TK20&K21 are the recognized standards for top quality surge protectors, FL485 have high respond speed, low output rudimental voltage, ascendance transfer performance. All have #10 ground screws which must be connected to a solid ground. Features: 1. Three stages of protection on every data line 2. Protected signal ground connection 3. Easy to install, plug-and-play 4. 4500V surge protection Specifications: Standard: Accord EIA RS-485 standard RS485 signal: IEC6100-4-5 and ITU-TK20&21 Working voltage: 0-5V Limit voltage:

• Effective protectionDo you want system operation to be unaffected by interference? Then surge protection is an essential requirement.

Supplier and installation 

• Material: Plastic
• Color: Creamy, Grey
• Condition: New
• Power: All powers
• Certification: CE Certified, ISI Certified
• Feature: All features
• Voltage: 220V, 440V, 320V
• Type: Surge Protection Device
• Frequency: 50Hz
• Warranty: 1Year
• Country of Origin: India
• Punture Voltage: All

Lightning-Protection-for-copper-Ethernet RJ45 Surge Protection Device up to 1000 MBit/s Protection Class C2+C1 for DIN-Rail and wall mounting

• Feature: Shock resistance, Unmatched quality, Dimensional accuracy

• Color: Black, Blue, Grey,Black,Blue, Grey
• Power Source: Excitation +ve Powered
• Application: Industrial Use, Outdoor Use
• Certification: IEC Standard for Surge Immunity Protection (IEC-61643-11)
• Type: Weighbridge Load Cell, Weighing Indicator ADC Protection
• Country of Origin: India,India
• Material: ABS

the load cell/weighing indicator surge protection device is a plug and play device, designed and developed to protect the weighing system indicator against the fault occurring from load cell side. this device will protect the analog to digital converter (adc) chips of the weighing indicator, from getting failed in the field against the conditions like electro static discharge (esd), overvoltage, short circuit and lightning arising from the cables leading to the load cell or the load cell platform itself. this device passes on the excitation voltage and returns the load cell signals without any deterioration of signal's levels but protects the weighing indicator against excessive leakage voltage and over current and electrical surges which may occur in the field from the load cell side due to esd or lightning or other reasons.this device being a simple plug and play module gets connected to the weighing indicator via 9-pin d-sub male connector and to the load cell via 9 pin d-sub female connector. features weighing indicator surge protection device has the following features  over voltage protection - 5v on excitation voltage line - 5v on signal lines  negative spike voltage protection - on excitation voltage line  reverse voltage protection  over current protection - on signal lines - 100ma cut off - one second restoration time - automatic restoration  esd protection → 8kv/15kv  lightning & surge protection - pulse current → ipp = 50 a (10/1000 μs) -  surge voltage → 4kv

Manufactured in compliance with the set industrial norms, the quality of the offered Conventional Lightning Arrestor is never compromised. Owing to the high grade raw materials used in its making, the offered arresters functionality is highly commendable

• Material: Aluminium, Stainless Steel, GI , FRP
• Voltage Level: High-Voltage
• Height: 2Meter, 3Meter, 4 Meter, 5meter, 6meter 
• No. Of Poles: Single Pole
•  :  

• Type: Copper Lightning Arrester
• Material: Ceramic, Fiberglass, Frp, Glass, Plastic, Porcelain, Resin, Rubber, Silicone
• Shape: Disc, Round
• Application: Control Panels, Industrial Use, Power Grade
• Color: Brown, Creamy, Dark Brown, Grey, Ivory, Light Grey, Off White, White
• Condition: New, Used
• Tensile Strength: 0-25Mpa, 25-50Mpa, 50-75Mpa
• Standard: DIN, ETDC
• Feature: Easy To Install, Electrical Porcelain, Four Times Stronger, Proper Working, Sturdy Construction, Superior Finish, Water Proof
• Warranty: 1year, 2years
• Temperature: High Temperature, Low Temperature, Medium Temperature

• Features: Effective, Dimensionally accurate, Non corrosive .
• Use: used in industries for protecting electrical circuits and machines from effects of lightening.

• Weight: 250 gm
• Material: Copper (Also Available in Aluminium,GI.)
• Model Name/Number: A'PC/PCAT 1.0
• Product Diameter: 30 to 50 mm
• Product Length: 6 to 8 inch
• Brand: Armour
• usage: In Transmission Towers

• Phase: Single Phase
• Poles Number: 3 Pole+N
• Class: B
• Brand: GELPS
• Application: Hospital, Clinical Purpose, Veterinary Purpose

• Material: Polymeric
• Shape: Round
• Application: Industrial Use
• Classification: Type C, Type B
• Housing Type: Polymer
• Frequency: 50 Hz
• Nominal Discharge current: 4kAP
• Poles Number: 1 Pole, 3 Pole
• Reference current: 1 mAP

• Dimension: 72mmx42mmx25mm
• Weight: 10g
• Working Temperature: -20 to 60degC
• Storage Temperature: -25 to 85degC
• Humidity: Relative humidity 5% to 95%

DESCRIPTION : • Protection against transitory surges of general electrical facilities connected to single-phase low voltage 230V mains power. Protector Type III (Fine protection).• Suitable for protection of equipment intended to be connected to an electrical installation (Category I, according to ITC-BT-23). • Model MCD-E, includes a front jack for connecting equipment to the electrical grid. • Technical specifications of the Absorber protectors: Nominal Voltage: U N= 230V AC (50Hz).Maximum working Voltage: UC= 275V AC (50Hz) Nominal discharge Intensity: In (8/20 µs)= 5kA Maximum discharge Intensity: Imax (8/20 µs)= 8kA Response time: tA < 25 nsProtection level: UP≤ 1kV Nominal load current: IL= 16 A (MCD-E model)