TDS Meters Dealers in Chennai

For the varied requirements of our clients, we are engaged in offering a wide range of TDS Meters. These products are constructed sing premium grade base material and advanced technologies that ensure their durability and reliability. These products are easy to operate and offer trouble-free performance. We are offering these products at affordable rates. Features: Easy to operate Highly stable and accurate Reliable

Range: 0 to 1990 ppmResolution: 10 ppmAccuracy: /- % Full ScaleCalibration: 1 point (Digital, push button)Automatic temperature compensationHold FunctionAuto-offWaterproofLCD Display (3.5 digit)Power: 4 x 1.5 VOperating Temperature: 0 to 50CDimensions: 16.3 x 4.5 x 3 cmWeight: 90g

• Resolution: 10 PPM
• Application: Laboratory
• Display Type: Digital
• Material: Plastic
• Button Type: Key Touch
• Item Code: TDS-3

• Resolution: 0.1ppm
• Power: 230V ± 10% 50 Hz
• Display: 3.5 Digit LED
• Temp. Compensation: 0 to 50 deg.C Manual
• Product Code: ELSHADDAI CVL - 025

• Feature: Accuracy, Digital Water Meter Display, Less Sample Required
• Type: Water Testing Kits
• Country of Origin: India
• Warrenty: 1 Year

This new meter can check 4 parameters DO, nitrite, pH and ammonia in fresh and salt water.  This meter gives accurate reading using its reagents  and is certified by CIBA

• Accuracy: 2%
• Power Supply: DC 18-36 V
• Measure Range (PPM): 0.0 to 100 degree C

The most important parameters needed for water analysis, especially in drinking water, can be measured with Hanna’s HI93102 portable meter. This instrument not only measures turbidity, but also free and total chlorine, cyanuric acid, pH, iodine, bromine, and low range iron. Measurements are made quickly and accurately through a sophisticated, yet easy-to-use microprocessor. Users can select between pre-programmed calibration values or calibration points can be customized at a specified concentration or relative absorbance of the sample. The HI93102 offers many features that appeal to use in the field as well as in laboratory settings. The exclusive cuvette locking system ensures that the cuvette is inserted into the measurement cell in the same position every time to maintain a consistent path length. Up to 25 measured samples can be stored in memory, together with time and date. Miniaturization of the electronics has made it possible to o‰ffer unsurpassed accuracy and quality in a portable unit weighing just one pound.   Features at-a-glance AMCO AEPA-1 Primary Turbidity Standard - The AMCO AEPA-1 standards for the turbidity range of the HI93102 are recognized as a primary standard by the USEPA. These non-toxic standards are made of styrene divinylbenzene polymer spheres that are uniform in size and density. The standards are reusable and stable with a long shelf life. Logging – The HI93102 allows users to log up to 25 measurement readings. Measurement logs can easily be recalled with the press of a button and a reminder will appear if the memory becomes full. The logging mode can be enabled or disabled. GLP – With a press of the “GLP” button on the face of the meter, users can view the date, time, and two calibration values of the current mode. Auto-shut Off - Automatic shut off is selectable after 10, 20, 30, 40, 50, or 60 minutes of non-use when the meter is in measurement mode. This feature prevents wastage of batteries in the event the meter is accidentally left on. Battery Status Indicator -  The status of the battery is monitored during every measurement cycle. An indicator will warn the user when the amount of battery life left is not sufficient to take reliable measurements. Error Codes – Helpful diagnostic codes appear on the display alerting to problems including low light, high light, or sample out of range.

• Display: 4 digit LED display
• Physical Diamensions: 75x75x90 mm
• Cutout Size: 68x68 mm
• Mounting: Panel
• Input Supply: 230 V AC
• Accuracy: +/-2%
• Resolution: 0.001/0.1/1 depending upon range
• Calibration: Using trim pots
• Temperature: 0-60 deg. C

It's concentration of dissolved solid particles. Dissolved ionized solids, such as salts andminerals, increase the electrical conductivity (EC) of a solution.

Canadian Clear has a state of art Anion, Canion and Softner resins of high quality to cater to the various needs of the water treatment equipments for softening, demineralizing and mixed-bed.Canadian Clear has a state of art cross - link polymide composite Reverse Osmosis membrane element manufactured specially by us. We have extensive experience accumulated over the years and wide range of reliable technology.  

• Power: 230V ± 10% 50 Hz.
• Resolution: 0.1ppm
• Display: 3.5 Digit LED
• Temp. Compensation: 0 to 50 deg.C Manual.
• Product Code: SAMS CVL - 025

• Country of Origin: Made in India
• Model Name/Number: TDSM602-1
• Temperature Sensor: RTD-PT100(3wire)
• Brand: Mepcco
• Dimensions: 96*96*85mm
• Power Supply: 90 to 270V AC/DC 
• Display: 7 Seg LED
• Weight: 500g
• Range: 1-20ppm,5-200ppm,10-2000ppm
• Temperature Resolution: 0.01ppm
• Temperature Accuracy: +/-1
• Operating Temperature: -10 to 50deg C
• Frequency: 50Hz

• Brand Name: Lutron
• Weight: 171 g
• Display Type: LCD
• Model: PCD-431
• Display Size: 20 mm x 28 mm
• Power Consumption: 5.7 mA.

3 ½ digit LED display with facility for temperature compensation digital cell constant adjustment along with conductivity cell.(Table Model) 

• Resolution: 0.01 mg/L
• Accuracy: 0.5%FS
• Features: Automatically compensates salinity and barometric pressure after manual input, Reset function allows user to returns all settings to the factory.
• Power Supply: AC220V, 50HZ
• Altitude: Less than 2000m

Microprocessor Based pH-EC-TDS Meter model 1615 is a solid state instrument designed for precise pH, EC, TDS and Temperature measurements. The instrument uses the latest microprocessor technology and advanced engineering techniques so as to give enchanced accuracy and reproducibility. The system has user friendly prompts, which guide you throughout the measurement process 16x2 Alphanumeric LCD DisplaypH, EC, TDS & Temperature MeasurementsAuto Temperature CompensationAuto Buffer Recognition in pH ModeAuto Ranging Facility in EC ModeProgrammable Ref. Temp & Temp. Coeff in EC Mode90 Samples Storage FacilityPrinter Attachment Facility

• Brand Name: HM
• Measure Range: 0-9000
• Minimum Order Quantity: 1 Number

A TDS Meter indicates the amount of Total Dissolved Solids (TDS) in a solution.