Temperature Controller Dealers in Anna Nagar, Chennai

We are well supported by a team of experienced personnel who take care of the storage facility ensuring zero damage to the products till the final dispatch of the orders. Our establishment in Chennai(India) is well connected by varied modes of transport. Thus, we are capable of reaching patrons with ease. Our MT20-LPID Fuzzy Temperature Controller is developed with advanced scientific methods and is tested for optimum performance.  

Chiller Temperature Controller : A special action for -50.0ºC to 50.0ºC range having independent setting for tember as well as delay time (time m for which Comres- sor has to rest before restarting) Hysteresis is also settable between 0.2ºC to 9.9ºC. The delay time is helpful in increasing the working life of the compressor. This is also available for two compressors ( independnet temperatures and the settings) and three compressors.Temperature Controller with Soak : For heat treatment apipilication addiptional time setting time setting is available to maintain the temperature of the furnace or ovan for the desired set time (0.999min) after the temperature has reached the set value.BOD Controllers : For controller of ovan temperature below or above m ambient temperature. The heating or cooling realy will turn on depending on whether wt temperature is above or below the ambjent temperature. Second sensior for sensing ambient temperature is provided. Both relays have independent hysteresis sellings (by keyboard).Temperature Controller With : The facilitynis used in heat treatment or settable rate of rise of temp material testing equipments .Rate of rise is settable by keyboard from 0 to 10ºC/minProfile Temperature Controller : This is useful in obtaining variable temperature profile in an ovan or furnace for heat curing application. The time and temperature data can be led by the keyboard, control action can be on/off or time propotional. this is also useful for testing purpose in Laboratory (Calibration Bath).PID Temperature Controller (Proportional, Integral & Derivative) : This is useful for precise control of temper ature in an ovan, furnce, plastic machinery etc. when job requires high heating during initial period & low heating when temperature stabilizes. Derivative action overcomes sudden changes in temperature due to load changes, integral action corrects the accumulated error.Derivative time constent and intergal time constant have to be set suitable for the machine whose temperaturemis to be controlled, initially, trial and error methodmis required to select these parameters, but once they are set the action gives better control of temperature.Relay output for control of contractor or pulse output for control of SSR is provided. Optionally 0 - 10V output can also be provided for control of SCR firing units.Controller with Analog Input : This is useful in application where transducers are used (i.e. load cell, flow sensor, pressure sensor etc.) The signal can be ) -10V or 4-20m A D.C. Like in other controllers, single set point and two point models are available. These relays can also be used as alternative settings, Calibration through key board is possible.

• Model Number: LAK06
• Brand Name: FFI
• Application: Industrial
• Temperature range: 55

• Display Type: Digital
• Accuracy: High
• Usage: Power

• Theory: Temperature Controller
• Model Number: TEMP IND 008
• Place of Origin: India

• grey: red

We are offering multi channel temperature scanner. it is a micro controller based multi channel scanner cum controller, which can measure, indicate and control temperature at different locations using the control outputs. It is available in different models, to suit the no/.of channels requirement and the various sensors like rtd, thermocouple etc., and the no of channels varies from 8 / 16 / 24. It ensures excellent linearity through smart linearization technique. Front panel programmable set value generates the necessary control output by scanning process temperature. The individual or grouped channel control output through relay outputs as per requirement & alarm indications available on front panel. The control action one for alarm and another for trip are maintained. It supports serial communication to take periodical print outs of process parameters and the necessary data logging for analysis.

• Voltage: 0-400 AND 1200 DEG
• Temperature Range: -200 Degree C to +600 Degree C
• Model Name/Number: JR 72 X 72 AND 96 X 96
• Controller Type: J TYPE/ KTYPE/ RTD
• Input: J,K,T,E,R,PT 100
• Mounting: 48X48 DIN

• Feature: Excellent finishing, Robust Construction, Quality assured.

Digital Temperature Controller, DUPLINE HOME AUTOMATION

Temperature Controller Repair Service, Fetal Monitor Repair Service

DUPLINE BUILDING AUTOMATION system, Photoelectric Sensors, Inductive Sensors

Temperature Indicators, laser measuring instruments, Calibration Test Bench

Analog Clock Controllers, Led Displays, Digital Clocks

Automatic Main Failure Controller Repair, Industrial Touchscreen LCD Repair

Stator Winding RTD, Inert Gas Pressure Thermometers

AC Drive > MFDDTB3A2 (5KW), Cnc Controller, AC Servo System, Speed Reducer

Electronic Liquid Level Controllers, electronic liquid level indicators