Temperature Sensors Dealers in Mahabalipuram, Chennai

OVERVIEW: The VS - TP furnace temperature probe system is designed for installation in boilers and furnaces to monitor the furnace gas temperature. The thermocouple fixed to the head of the probe moves front and back in the boilerat a speed of 1.75m/min. The VS - TP temperature probe, offers to monitor the temperature at different levels in a boiler. The thermocouple feedbacks signal to the DCS.

DUAL ELEMENT PYROELECTRIC SENSOR DIGITAL SIGNAL PROCESSING (DSP) DETECTION RANGE UP TO 12M DETECTION ANGLE UP TO 110° SELECTABLE ZONE NUMBER JUMPERS SELECTABLE ADDRESS JUMPERS ABS HOUSING

• Application: Industrial
• Color: Yellow
• Features: Various types
• Country of Origin: Made in India
• Cable Length: 1 Meter
• Sensor Size: Beed type / Stemp type RTD

• Temperature Range: 0 to 750 deg C
• Application: Industrial
• Accuracy: +/- 2.5 deg C or +/- 0.75%)
• Probe Length: 0 - 150 mm
• Probe Diameter: 0.5 - 8 mm
• Probe Material: Stainless Steel
• Assembly: Thermocouple Head Assembly

• Input: 3 wire RTD/PT100/CU 53/Thermocouple (K/R type) 
•  No.of channels:  to be specified
• Range : Configurable 
• Accuracy : /- 1% 
• Display : Seven segment LED(Min 0.5"),3 1/2 Digit for Temp & 2 Digit for channel No. 
• Scan Rate : Min 6 channel per second 
• Indications : Alarm & Trip,open & short Circuit indication 
• Output Relay : 2 Nos,one for alarm & one for trip.,& each Channel can be configured for these relays,it can be configured for no.of input crosses set limit for Alarm/Trip/Rate High/Rate low 
• Contact Rating : One change over contact.5A@240V AC/2A @ 24V DC 
• Delay : 0-15 Minute,adjustable for Alarm and Trip separately 
• Display : Either in Auto or Manual,set point indications,various Parameters Indications 
• Power Supply: 240V AC,50HZ 
• Features  : High mechanical strength, Long functional life, Easy to carry

HI7662-A is a stainless steel temperature probe for the HI921 Autosampler. The HI921 Autosampler interfaces directly with the HI902C to access titration methods. High accuracy thermometers provide the versatility, speed, and reliability required by users in all areas concerning temperature measurement. Speed is important when the reactions being monitored have the potential to change rapidly. pH readings must be temperature compensated in order to obtain accurate results. The source of temperature measurement can be from the HI7662-A Temperature Sensor or from a trimmer that is manually adjusted. In either case, the instrument is adjusting the pH reading to compensate for changes in the pH sensor. Temperature compensation provides the actual pH of the buffer or sample at the temperature of measurement. Temperature compensation can be obtained in three ways: A separate probe specifically for measuring temperature A probe with a temperature sensor built-in Manual adjustment for temperature

Mineral-Insulated RTD Temperature Probe, Rotameter - Metal Tube

analog sensors, Sensor & Temperature Controllers

portable temperature sensor, Gas alarm, Control Valves, Body Protection