Testing Equipment Dealers in Guindy, Chennai

4-Channel Broadcast Monitor The COMM-connect Entry Level Broadcast Power Monitor type 3025 can control two external RF Measuring heads. The high dynamic range with external couplers and RF measuring heads cover from 1W to 1MW. Equipped with the RMS Probes the Power conversion algorithms handles multi carrier, multi mode signals. With the 3026 Diode base probe the power readout gives good repeatable results. The power readout is auto scaled and VSWR will be calculated between the two probes. The COMM-connect Entry Level Power Monitor gives a number of application to monitor and control the last part of your RF network installation from transmitters to the antenna. Specifications:  · Frequency range:    · 3015 Probe: 470 - 860MHz    · 3016 Probe: 50 - 250MHz    · 3026 Probe: 10 - 2500MHz    · 3020 Probe: depends on variant · Temperature range: 0C to +50C · Power Supply: 85-264VAC, 50/60Hz Applications:  · Cost effective · Site monitoring · Rack mount · USB administration · Wide selection of probes

HIGH PROFILE MULTIFUNCTION METERPOWER NAVIGATOR | eNAVIGATOR I NAVIGATOR PLUS Measure, Monitor and Control Basic, Power, Energy, Harmonics, Kfactor and Unbalance. BenefitsMultiple options like DemandImport Export / Harmonics. Digital or Analog Input or Output. Technology Advanced Circuitry for accurate measurements.   Applications Demand Control, Import Export, Harmonics Measurement & Transformer Efficiency.

A machine frame with a drive system and specimen holder, abrasion drum, metal housing, electric motor for rotation of the drum and the specimen holder.The machine can be supplied with a special brushes and vacuum cleaner in order to clean the dirt which gets accumulated on the drum. This greatly enhances the life of the machine and reduces cumbersome cleaning of the machine.

We manufacture concrete testing instruments which are made of finest quality of glass which enhances its durability. All the tools deployed in the manufacturing of cement concrete testing instruments are tested regularly so that any kind of inaccuracy occurred in machinery should not affect the design of the glass. The portable concrete testing instruments fabricated by us are intensely examined by the team of expertise under the practical conditions. With the in house availability of all the necessary tools and equipment needed for producing and examining equipments, we are pioneer manufacturer and suppliers from India. We provide a range of various testing instruments for coil, cement and concrete. Different types of instruments include following: Abbot's Compaction Apparatus Abrasion Testing Machine Concrete Mixer Spring Testing Machine Aggregate Impact Tester Marshall Stability Test Apparatus Dial Gauge Slump Test apparatus Needle Vibrator Dames and Moor Sampler Shrinkage Bar Mould Briquette Mould Plate Bearing Test Apparatus Ductility Testing Machine Thickness Gauge Unconfined Compression Test Apparatus CBR mould Rapid Moisture Meter Jolting Apparatus Vane Shear Apparatus CBR Test Apparatus Consolidation Apparatus and many more

• Type: Breath Alcohol Analyzer
• Certification: CE Certified, ISO 9001:2008
• Application: Alcohol Testing
• Color: Green, Grey, Light Green, Multicolor, Sky Blue, White
• Condition: New, Used
• Automatic Grade: Semi Automatic
• Power Source: Battery, Electric
• Feature: Easy To Use, Electrical Porcelain, Four Times Stronger, Proper Working, Superior Finish, Water Proof
• Warranty: 1year, 2years
• Freaquency: 45Hz, 66Hz

• Brand Name: Embsys
• Warranty: 1yrs
• Country of Origin: China
• Frequency: 50Hz

• Type: Wireless Network Testers
• Brand Name: Bosch
• Certification: ISO 9001:2008 Certified
• Color: Grey, Multicolor
• Condition: New
• Frequency: 45Hz, 66Hz
• Automatic Grade: Automatic
• Power Source: Battery
• Feature: Easy To Use, Electrical Porcelain, Four Times Stronger, Proper Working
• Warrenty: 1year

• Range: 0.1 uS to 100mS (6 decadic ranges)
• Display: 16 x 2 alpha numeric, LCD display
• Resolution: 0.1 • Accuracy+ 1% of F.S. + 1 digit
• Calibration: Auto / Manual
• Product Code: ELSHADDAI CVL - 020

• Brand Name: TSI
• Finishing: Polished
• Shape: Rectangular
• Color: Powder coated
• Condition: New
• Power: 230V
• Application: Curing concreate mould
• Certification: ISO 9001-2015
• Feature: Eco-Friendly
• Capacity: 100-1000ltr
• Standard: NAPL
• Type: Accelerated Curing Tank
• Warranty: 1year
• Country of Origin: India

• Country of Origin: China
• Certification: CE Certified
• Warranty: 1yr

Battery Power backup Room Quality Sensor transmitter, which can detect temperature, humidity, PM2.5, PM10, Illumination, Pressure, TVOC, CO2, O2, H2, H2S.   Note: You can add or remove any parameters   Parameters   Power supply: DC 10-30V Maximum power consumption: 0.6W (24V DC power supply) Detection parameter: temperature, humidity, PM2.5, PM10, Illumination, Pressure, TVOC, CO2, O2, H2, H2S. Working environment: -10℃-55℃, 0~95%RH Signal output: WIFI or RS485 Product material: ABS Installation method: wall-mounted, ceiling-mounted   Datasheet - Air Quality Detector Detection parameters Range Resolution Accuracy Preheat time PM2.5 0~1000ug/m3 1ug/m3 ±3%FS(@100μg/m3,25℃,50%RH) ≤2min PM10 0~1000ug/m3 1ug/m3 ±3%FS(@100μg/m3,25℃,50%RH) ≤2min Temperature -40℃~+120℃ 0.1℃ ±0.5℃(25℃) — Humidity 0%RH-100%RH 0.1%RH ±3%RH (60%RH, 25℃) — Atmospheric pressure 0~120Kpa 0.1Kpa ±0.15Kpa@25℃101Kpa — Illumination 0~200000Lux 1Lux ±7%(25℃) — TVOC 0~60000ppb 1ppb 8%FS(@C2H6O,0.5ppm,25℃,50%RH) — Carbon dioxide 0~5000ppm 1ppm ±(50ppm+ 3%F·S) 2min O2 0~25%Vol 0.1%Vol ±2%FS ≥5 minutes H2S 0~100ppm 1ppm ±2ppm or ±10% ≥5 minutes H2 0~1000ppm 1ppm ±5%FS ≥5 minutes

• Voltage: 220-318 V
• Chamber Volume: 80-100 L
• Power Supply: 0.5 KW
• Frequency: 50 Hz

Roughness Parameters : Ra, Rz, RY, Rq, Rt, Rp, Rmax, Rv, R3z, RS, RSk, Rmr Primary profile Profile recording magnification : Vv: 200x - 20000x Vh: 20x, 50x, 200x Display resolution : 0.001 µ m / 0.04 µ inch   Product Code : SAMS MTR - 022

Graduated scale enables easy visual check of flow rate regardless of operator. Built in flow rate adjustment valve enables desired setting of mold conditions for each machine. Easy resumption of previously set molding conditions to cut lead times. T2 side is equipped with rotary functions. Even after flexing the body on T1 side to the piping. additional screw tightening on T2 side is possible. Maintenance is extremely simple.

The MicroLite is an ideal solution for a variety of industrial cold chain logistics, requiring a small form factor USB data logger. Low cost, water resistant, multi-trip temperature data logger, with high resolution, 4-digit LCD display and direct USB connectivity – the MicroLite offers truly cost effective data logging. Accurate historical data indicator for an unbroken cold chain Six models offer a unit for every application Long battery life and 32K cyclic memory serve long haul transports Real-time LCD data display Dust and water resistant, depending on logger model License-free data analysis software The comprehensive MicroLite range allows organizations to select the unit most appropriate for their mission-critical environment:

  Our digital time totalizers are suitable for wide variety of needs. Irrespective of your need, we provide the best functionality, lightweight and the most economical products. Some of the features that our digital time totalizers include are easy mounting, AC and/or DC power source, tamper proofing, with or without reset button, and different number of digits.

We offer Thermal Conductivity Apparatus. Thermal Conductivity Apparatus BSPIL-HTR-09010 This apparatus consists of the test section assembly, consisting of the asbestos specimen, heater as well as thermocouples are available to measure temperatures on the specimens and there water inlet and outlet. Provision is also made to measure the cooling water flow rate. The whole assembly is enclosed in an insulating layer of mineral wool to prevent radiation and convective losses to the maximum extent possible

• Accuracy: +-2.0 %
• Brand Name: Accsys
• No. Of Channels: Max 12
• Measuring Range: -200 to 850 deg C
• Decimal Point Format: 1 Decimal
• Resolution: 0.1 deg C
• Dimension: 96x192x350 cm
• Relay Contact Rating: 230 V AC/DC, 5A
•  Display:  4 digit

The laboratory has been set up for implementing related reliability testing for raw material and final products. According to the test reports of laboratory, decisions are taken for using materials in related project.

• Display Type: :
• Sensor Type: :
• Large area Ge Photo detector: Calibrated Wavelength
• :: 850nm, 1310nm, 1550nm (switch selectable)
• Optical Input Wavelength: :
• 800 – 1550nm: Optical Input Power
• :: +3dBm to -60dBm
• 3½ Digit LCD: Accuracy
• :: + 0.2dB
• Resolution: :
• 0.1dB: Operation
• :: 9V Battery or 9V wall mount adaptor
• Optical Interface Connectors: :

Ultrasonic testing is often performed on steel and other metals and alloys, though it can also be used on concrete, wood and composites, albeit with less resolution. It is used in many industries including steel and aluminum construction, metallurgy, manufacturing, aerospace, automotive and other transportation sectors.