Testing Equipment Dealers in Mangadu, Chennai (26 products available)

• Features: Easy and accurate clamping, Maximum service ability, Shear strength

Climatic Chamber used to test effects that climatic changes have on products placed within environmental chambers. These chambers evaluate product quality and identify weaknesses. High temperature, low temperature and humidity testing conditions can be done in single unit.

The NEXO LSC Lightning event counter is an innovative device which allows the automatic counting of lightning stikes recieved by the lightning protection system. It is connected to the down conducter of the Lightning protection system and is ideal for analyzing the frequency of lightning strikes and the effectiveness of the lightning protection system in place. Features: NEXO LSC's 6 Digit displayy allows to count lightning strike events up to 6 digits before resetting and to start counting again. It Comes in Weatherproof casing and counts lightning events in real time. It is ideal for analyzing the frequency of lightning strike occurrences in a prot neccessary.

• Features: High precision, durable and compact turbine flow meters,Modular design allows for use with Output Modules, Sensors and Remote Transmitters, Low pressure drop allows for gravity and pump.
• Meter Type: Electronics
• Application Media: Water
• Condition: New
• Automation Grade: Automatic
•  :  

• Ranges: 35 / 70 / 100 / 160 / 350 / 600 / 700 Bar
• Piston: Single / Dual                                                                  Refer Table 2
• Standard Accuracy: ±0.1% of Reading
• Traceability: International Standards                                                   Refer Table 1
• Weights: Mild Steel / Non-Magnetic Stainless Steel
• Pressure generation: Thro’ Priming Pump & Screw Ram
• Standard Corrections: Gravity : 9.80665 m/s2* / Temperature : 20°C / Air Density : 1.2 Kg/Cm2
• Weight (approx.): Instrument : 19 Kg. ; Weight Sets : 8 to 33 Kg.                 Refer Table 2
• No. of Weights: 12 to 15
• Instrument Dimensions: 530 x 325 x 230 mm (L x W x D)
• Operating Fluid: Oil

If Series of oil well pipelines will be connected to single header is called Inlet manifold header. Inlet manifold will have two headers which is Production header and Test header. Inlet manifoldis the initial manifold header of upstream oil and gas processing system, Mainly Early production facility and well testing oil and gas industries are requires inlet manifold. Which is also called well head inlet manifold. Production header of inlet manifold is coming with safety shutdown valve for safe shutting down of well. Test header of inlet manifold is a side stream from production line which will be used to test the oil and gas properties at regular intervals. Test header of inlet manifold may either connected with multiphase meter or test separator of well testing. Vienerg manufacturing inlet manifolds coming with production and test header in a compact skid modules for client flexibility. Vienerg's Inlet manifold skids are manufactured as skid to minimize field installation and labour cost. Some client prefers ESD shut down system along with Inlet manifold for full operation of surface safety valve (ESD valve). Two types of Inlet manifolds are now available in the oil and gas industry.    Conventional type inlet manifold -from initial which is used , it requires bigger plot plan and number of manual intervention is required    MSM manifold - Multi selector manifold which is coming with automatic switch over arrangement to divert production line to testing header and vice versa. Emerson is the leading MSM valve supplier in the oil and gas industry

CME offer both a cyclic corrosion test chamber (SF-CCT) as well as a traditional salt spray chamber (SF-SST). The SF-CCT chambers are compatible with multiple test standards including automotive standards and they can be alternated/cycled between varied humidity programs with the traditional salt spray. In recent years it has been proven that cyclic corrosion tests offer a more realistic simulation of real time corrosive environments than the traditional salt spray testing method. The salts spray test revolves around a single set point of temperature (ambient to 55oC) on the continuous mode. It lacks the role of real life conditions such as condensation humidity, air-drying etc. making the test less reliable than the cyclic corrosion test. Though CME offer both variants (cyclic corrosion test as well as salt spray test) of the chamber, it always suggests opting for SF-CCT as it is programmed to conduct a whole range of corrosion tests such as wet cycle, dry cycle, controlled humidity (optional) as well as the salt spray test in a single chamber! Built with moulded fibre, reinforced plastic and coated with automotive PU paints; the chamber’s structure offers high strength while maintaining its non-corrosive properties. The pneumatically operated translucent hood gives a clear view of the test-in progress and offers greater flexibility in specimen mounting & dismounting. During testing the atomiser sprays fine droplets (500 micron) across the test space ensuring a uniform fog collection, whereas the low-pressure vapour boiler with air circulator provides better control in the injection of moisture with minimum fluctuation. Recently the chamber has undergone a facelift based on the recently held R&D congress (at CME HQ) to eliminate the solution tank from the chamber and offer them as a separate mobile unit as per the customer’s request. This has helped in decreasing the footprint area by 30% making it more compact and consistent. Corrosion testing involves multiple test standards, which are developed by the automobile manufacturers or are according to the specific country standards. To match this diversity, CME has engineered both its SF-CCT as well as SF-SST to comply with more than 100 global test standards. It has a mix of all types of test standards ranging from ASTM, MIL, ISO, JASO to GM, NFX, AS, ECC and more. You could click here and see the full list of test standards that the chamber complies with.

Flow Indicating Totalizer Rate of Flow & Total Flow 16 Characters, 2 Lines Backlit LCD Display. Character size 2.95 mm x 5.55 mm. Non volatile RAM which retains last totalizer reading in case of power failure. Isolated linear 2 wire, 4-20 mA DC Output. [External DC power supply required] Flow indicator units acts as a Modbus (RTU) Slave Device with RS232 / RS485 (optional). Standard Modbus (RTU) or any other.

Our Full Sight Flow Indicator is designed to give flow in any direction. It is widely recommended for low pressure lines. Further for colorless tubes it can fit with diptube. Full View Sight Flow Indicator can be assembled with toughened cylindrical (tabular glass). Features Standard safety and maintenance featureEasy operationLower costFlexibleModular design Used for Corrosive chemicalsAcidsColored liquids

We are offering different types of probes are available for nerve root, murphy ball tip probes and foraminal ball tip probe. They are manufactured with a smooth finish for easy finish and glide. The slight matted finish also prevents glare thus serving easy overall procedure during surgery.

• Brand Name: Satt - Custom
• Usage: Industrial, Laboratory

inductance meter, Vacuum Leak Tester

wireless monitoring system, Wireless Monitoring, conveyor control system

Digital Portable Metal Hardness Tester

crystal hardness testing equipment

cabinets, Deep Freezers, plasma freezers, research cabinets

Rear Window Glass Defog Unit Resistance Line Count Tester

Xenon Arc Test Chamber, Solo Monoplace Hyperbaric Chamber

ozone tester, Vacuum Heater Hose, Mooney Viscometer, Vacuum Tester

Flow Meter, Swimming Pool Filtration Plant, engine maintenance

electrical safety tester, Electrical Tester

Testing Instruments, stirred baths, sub zero temperature calibrators

tester, Lab Equipments, Balances, Gloves, Burners, Industrial Stirrer

Motor Testing Machine, Data Acquisition Software, data logging software