Testing Equipment Dealers in Pattabiram, Chennai

• Brand Name: TSI
• Temperature Range: Ambient to +50 Deg C
• Capacity: 300, 600,900,1500 liters
• Humidity Range: 60% to 95%RH
• Saturated Temperature: Ambient to +65 Deg C
• Salt Spray Fall Out Rate: Adjustable from 0.5 to2.5ml per 80cm2 per hr 

• Type: Tester
• Certification: ISO 9001:2008 Certified
• Application: Industrial Use
• Color: Sky Blue
• Feature: Easy To Use
• Condition: New
• Automatic Grade: Semi Automatic

Piston Calibrated thro’ “Cross Floating Techniques” • Calibrated to Standard Gravity (Customer specific Gravity adjustment can also be done optionally) • Accuracies Traceable to International Standards • Non-Magnetic Stainless Steel Weight Sets • Calibration Certificate – for overall Accuracy + PCU (Area) + Weights (Mass) from NABL Accredited Lab – as per ISOIEC 17025:2005

CME’s AT series of altitude test chambers are used to test aerospace/aeronautical components where pressure plays a significant role along with temperature and humidity. A standard AT chamber could simulate environmental conditions of up to 50 Km (above sea level) in its test space. Built with galvanised steel and the touch of epoxy based powder coating, the structure is rigid enough to withstand extreme testing conditions. The test space is made of 10 mm stainless steel (grade AISI-304), which is TIG welded and reinforced to withstand the pressure changes. It also has adjustable shelves and an entry port to conduct live testing on the specimen. TEFC motor with vacuum feedthrough sealing is used with an axial flow fan to maintain a smooth laminar air flow across the test space. To avoid condensation during low temperature cycles, heaters are provided along with dual silicone extruded gaskets in the test space frame. As rightly quoted “Good engineering is a perquisite for reliability”, a lot of detailing has gone in both the system designing and the component selection of the AT series. Be it in refrigeration system comprising the semi hermetically sealed reciprocating compressor, high efficiency evaporator unit, in-built water-cooled condenser, on-Demand cooling, et all. are all carefully designed to offer the best reliability to the customer. The chamber offer altitude ranges of up to 10 mbar, temperature range of -70 0C to 180 oC and time to vacuum of less of 30 min. AT series is equipped with the “Envicom Graphite series” controller, offering the benefits similar to the other chambers, the thermal shock chamber also has the Envicom Graphite Series controller which is touch enabled and bundled with miltiple features to augment the testing experience. The ports of Ethernet, RS 232 and RS 485 ensure remote monitoring of the chamber as well as integration with 3rd party software such as NI/Lab view. To learn more about the Envicom Graphite Series controllers, visit its page. The Altitude chamber can also be customized as per the test requirements. To know more visit the customized solution page.

-dgt Plus Dummy Zero μp Based Indicator, Double Input for Ac Current or Voltage Measurements. 112 Selectable Primary Ranges. Housing for Panel Mounting and Ip 50 Front Protection Degree (ip65 On Request). features: â·3 Dgt Led + Dummy Zero, μ-based â·digital Indicator, for Trms Ac Current and Voltage measurements â·dip-switch-selectable Ranges â·front Dimensions: 48 X 96 Mm â·front Protection Degree: Ip 50 (ip 65 On Request).

• Phase: Single
• Voltage: 230VAC
• Humidity Range: 40 to 90 percent
• Frequency: 50Hz
• Capacity: 50 to 1000 Litres
• Temperature: +5 degC to 60 degC 

• Ranges: 35 / 70 / 100 / 160 / 350 / 600 / 700 Bar
• Piston: Single / Dual                                                                  Refer Table 2
• Standard Accuracy: ±0.1% of Reading
• Traceability: International Standards                                                   Refer Table 1
• Weights: Mild Steel / Non-Magnetic Stainless Steel
• Pressure generation: Thro’ Priming Pump & Screw Ram
• Standard Corrections: Gravity : 9.80665 m/s2* / Temperature : 20°C / Air Density : 1.2 Kg/Cm2
• Weight (approx.): Instrument : 19 Kg. ; Weight Sets : 8 to 33 Kg.                 Refer Table 2
• No. of Weights: 12 to 15
• Instrument Dimensions: 530 x 325 x 230 mm (L x W x D)
• Operating Fluid: Oil

Eddy Current Tube Standards. Ready to request a quote for a standard? Here's what we need... What is the material? (Alloy, OD and Wall) Is NDE supplying the material or will it be customer supplied? What defects are needed and what size? (most depths are given in % of tube wall) Is there a specification the standard needs to comply with? (ASME, etc.) If you have a drawing, or even a simple hand sketch, please send that along as well. We specialize in custom eddy current tubes, and have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, ID contoured flats, 120°/180° wearscars, tapered flaws, and tube-to-tube wear,   Remote Field Testing Tube Remote Field Testing Tube Eddy Current Tube Standards. Ready to request a quote for a standard? Here's what we need... What is the material? (Alloy, OD and Wall) Is NDE supplying the material or will it be customer supplied? What defects are needed and what size? (most depths are given in % of tube wall) Is there a specification the standard needs to comply with? (ASME, etc.) If you have a drawing, or even a simple hand sketch, please send that along as well. We specialize in custom eddy current tubes, and have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, ID contoured flats, 120°/180° wearscars, tapered flaws, and tube-to-tube wear,    

We are offering different types of probes are available for nerve root, murphy ball tip probes and foraminal ball tip probe. They are manufactured with a smooth finish for easy finish and glide. The slight matted finish also prevents glare thus serving easy overall procedure during surgery.

• Type: LVDT Probes
• Application: Industrial use
• Size: 20 mm
• Color: Silver
• Condition: New
• Features: Unique design, Approved quality, Long service life

Flow Indicating Totalizer Rate of Flow & Total Flow 16 Characters, 2 Lines Backlit LCD Display. Character size 2.95 mm x 5.55 mm. Non volatile RAM which retains last totalizer reading in case of power failure. Isolated linear 2 wire, 4-20 mA DC Output. [External DC power supply required] Flow indicator units acts as a Modbus (RTU) Slave Device with RS232 / RS485 (optional). Standard Modbus (RTU) or any other.

• Brand Name: Satt - Custom
• Usage: Industrial, Laboratory

If Series of oil well pipelines will be connected to single header is called Inlet manifold header. Inlet manifold will have two headers which is Production header and Test header. Inlet manifoldis the initial manifold header of upstream oil and gas processing system, Mainly Early production facility and well testing oil and gas industries are requires inlet manifold. Which is also called well head inlet manifold. Production header of inlet manifold is coming with safety shutdown valve for safe shutting down of well. Test header of inlet manifold is a side stream from production line which will be used to test the oil and gas properties at regular intervals. Test header of inlet manifold may either connected with multiphase meter or test separator of well testing. Vienerg manufacturing inlet manifolds coming with production and test header in a compact skid modules for client flexibility. Vienerg's Inlet manifold skids are manufactured as skid to minimize field installation and labour cost. Some client prefers ESD shut down system along with Inlet manifold for full operation of surface safety valve (ESD valve). Two types of Inlet manifolds are now available in the oil and gas industry.    Conventional type inlet manifold -from initial which is used , it requires bigger plot plan and number of manual intervention is required    MSM manifold - Multi selector manifold which is coming with automatic switch over arrangement to divert production line to testing header and vice versa. Emerson is the leading MSM valve supplier in the oil and gas industry

Our Full Sight Flow Indicator is designed to give flow in any direction. It is widely recommended for low pressure lines. Further for colorless tubes it can fit with diptube. Full View Sight Flow Indicator can be assembled with toughened cylindrical (tabular glass). Features Standard safety and maintenance featureEasy operationLower costFlexibleModular design Used for Corrosive chemicalsAcidsColored liquids

prepaid meters, Demand Controllers, Panel Meters, Temperature Controllers

Delhi Metco - Chennai Metco Automatic Polishing Machine

Digital Portable Metal Hardness Tester

Data Acquisition Systems

civil engineering testing equipments

We are well known for supplying of wide variety of Pressure Recorders.

Eol Tester, Laser Inspection System, Cluster Inspection System

tester, SKF Bearings, skf oilseal, rotor die casting machine

Flow Meter, Swimming Pool Filtration Plant, engine maintenance

Testing Equipment, balancing machines, measuring equipment

Testing Instruments, stirred baths, sub zero temperature calibrators

electrical safety tester, Electrical Tester

Opacity Tester

tester, Lab Equipments, Balances, Temperature Controller, Gloves, Burners

Flow Meter, Automotive Electrical Relays, Electromechanical Relays