Testing Equipment Dealers in Thirumudivakkam, Chennai

• Condition: New
• Temperature range: -40°C,-20°C,0°C
• Humidity range: 20%
• Volume: 720 Liters
• Exciting force: 200 kgf
• Controller: LCD touch screen controller +SSR

Technico salt spray test chamber entire is constructed by thick polypropylene or acrylic sheet body. The top lid door will be made of transparent Acrylic. The solution reservoir is separated externally in a cylindrical vessel and fixed to the side of the main chamber. The solution is sprayed inside the chamber by means of compressed air (Air compressor not in our scope) and its level is controlled by float valve. The main chamber is provided with transparent acrylic cover lid mounted on fabricated acrylic hinges. The top lid closes the entire chamber without fog leakage. The saturation tower and the control panel are attached with the sidewall of the main chamber. The control panel is made of FRP material. Solution and water drain out tap are also provided. Suitable specimen holders and job holding devices are furnished inside the chamber.   Technical Specification: Chamber temp. : 35 C   Control accuracy : 3 C   Saturation tower temp. : 40 C to 45 C.   Controller type : PT- 100( RTD type)  Temperature controller:  Size : 48 x 48 mm   Type : Digital  Humidity Indicator:  Size : 48 x 48 mm   Type : Digital  Digital Timer:  Make : Selectron   Size : 72 mm x 72 mm   Hours : 999.9 hrs  Pressure gauge:   Range : 0 – 4.2 kg/cm2   Range : 1 kg/cm2 (saturation tower).   Solution tank : 5 % of the sodium chloride (100 lit) is prepared and poured in the chamber reservoir. It is passed to the spray tower through the mechanical float through which is maintaining the water level in the tower. POWER SUPPLY: The chambers plug pin should be connected to the power supply & the timer to be set according to the testing hours.   PRESSURE REGULTOR WITH GAUGE: The compressed air enters to the solenoid valve. It is controlled by the help of pressure regulator (15 lbs.) in pressure gauge. When the testing specimen or components are loaded to the chamber. The drain out valve is kept open because the condensed for water should not touch the specimens   STANDARD SIZE: 600 x 600 x 600H or 600 x 900 x 900H.

material testing lab instruments

Is a device for estimating blood alcohol content from a breath sample.

• Features: High precision, durable and compact turbine flow meters,Modular design allows for use with Output Modules, Sensors and Remote Transmitters, Low pressure drop allows for gravity and pump.
• Meter Type: Electronics
• Application Media: Water
• Condition: New
• Automation Grade: Automatic
•  :  

Electrical Testing of Motor Components and Equipment:Functional Test,Core Loss (Ring Flux) Testing,Surge Testing Surge Comparison Testing of 3-Phase Windings,Testing of Die-Cast Induction Type Rotors for Open Bars.

• Frequency: Range Voltage Input - 5 Hz to 50 kHz
• Warranty: 1 Year
• Brand: Fluke
• Digit Display: 4 Digit
• AC Volts Range: 300 mV to 600.0V rms
• DC Volts Range: 1 mV to 600.0V
• Temperature Range: -328 degree F to 2462 degree F

static watt hour meter, transducer, dc kwhr meter, Panel Meters

Oscilloscopes, Recorders, clamp meters, Data Acquisition Systems

Air Leak Tester, Through Bolt Assembly

Motor Testing Machine, Data Acquisition Software, data logging software

Ohms Law Apparatus, Joule Calorimeter, Hooke Law Apparatus, Laboratory Desk

ozone tester, Vacuum Heater Hose, Vacuum Tester

Energy Management Systems, Switch Fuse Unit, mv panels, acb panels

scientific apparatus, Pipette, Bottles, Beaker, bmr apparatus, spiro meter

electronic testing equipment, assembly lines

Energy Meters