Testing Equipment Dealers in Thiruvanmiyur, Chennai

• Type: High Voltage Probes
• Color: Green, Grey, Light Green, Sky Blue
• Condition: New, Used
• Frequency: 50hz, 60hz
• Feature: Easy To Install, Electrical Porcelain, Four Times Stronger, Proper Working, Sturdy Construction, Superior Finish, Water Proof
• Warranty: 1yr
• Cooling System: Air Cooling
• Temperature: High Temperature, Low Temperature
• Automation Grade: Automatic, Fully Automatic

We are the main supplier of this product.

• Voltage: 0-2000V
• Display Type: LCD
• Weight: 460 Grams
• Model Name/Number: MECO-4455
• Usage/Application: Solar Industries
• Brand: MECO
• Power Supply: 9 V Battery
• Dimension: 270x100x46mm
• Features: High Voltage measurement

Compact or remote versions for DN15 to DN200 Fully configurable conductivity transmitter for all kinds of conductivity measurement tasks Large range of process connections with various fittings Multi language, menu-guided operation

• Material: Mild Steel
• Phase: Single
• Shape: Rectangle
• Frequency: 50 Hz
• Power Source: Electric
• Sheet Thickness: 2 mm

• Color: Grey
• Display Type: Digital
• Weight: 3 KG
• Weight: SI/DPA
• Usage/Application: Industrial
• I Deal In: New Only
• Features: Handy single phase table top device, LED display
• Auxiliary supply: 230V, 50Hz
• Potential circuit: 110 / 440V AC.
• Current circuit: 1A / 5Amps AC
• Range: Overall size
• 300 x 100 x 150 mm: 3 Kg

• Country of Origin: Made in India
• Voltage: 24V DC, 230V AC
• Frequency: 50 Hz
• Temp Compensation: NTC10K or PT1000
• Temperature Range: 0-100 Degree Celsius
• Range: 0-14 PH
• Accuracy: 0.02 PH
• Size of Sceen: 2.4 inch
• Current Output: 4-20mA
• Control Type: High Limit
• Brand: RR Electronics
• Pole Type: Single Pole
• Usage/Application: Water Analysis

Feature: High luminance, internal graticule CRT Japanese electronic encoder,light,handy and reliable Fully sealed long live vertical mode switch ALT Triggering Function. Two independent signals simultaneous observation Build-in 6 Digit Frequency Counter 30MHz Dual Channel 10 times sweep magnification TV Synchronization-Y mode     X-Y MODE: Frequency bandwidth: DC to at least 500KHz; X-Y phase difference: ≤3° at DC~50KHz Sensitivity: Same as vertical axis. (X-axis : CH1 input signal; Y-axis : CH2 input signal); Calibration voltage Waveform: Positive-going square wave; Frequency: Approx. 1KHz; Duty ratio: Within 48:52; Output voltage: 2Vp-p±2%; Output impedance: Approx. 1KΩ Calibration signal: Waveform: Positive-going square wave; Frequency: Approx. 1KHz; Duty ratio: Within 48:52; Output voltage: 2Vp-p±2%; Output impedance: Approx.1KΩ CRT: Type: 6-inch rectangular type, internal graticule; Phosphor: P31; Acceleration voltage: Approx. 2KV (20MHz) / Approx. 12kv (40MHz); Effective screen size: 8×10 DIV [1DIV=10mm(0.39in)]; Graticule: Internal; Trace rotation: Provided Vertiacl axis: Sensitivity: 5mV~5V / DIV, 10 steps in 1-2-5sequence Sensitivity accuracy : ≤3% Vernier vertical sensitivity: Continuously variable to 1/2.5 or less of panel-indicated Frequency bandwidth: DC~30MHz (x5 MAG : DC~7MHz) / DC~40MHz (x5 MAG : DC~15MHz) DC~50MHz (X5 MAG : DC~15 MHz) AC coupling: Low limit frequency 10Hz. (With reference to 100KHz, 8DIV, Frequency response with-3dB.) Input impedance: Approx.1 MΩ / Approx. 25pF DC balance shift: 5mV~5V / DIV: ±0.5 DIV, 1mV~2mV / DIV ±2.0 DIV Linearity:

• Country of Origin: Made in India
• Brand: Rishabh
• Usage/Application: Industrial
• Display: LED 3 Digit, 3 Rows
• Dimension: 96 x 96 mm
• Supply Type: 40-300V AC/DC ( 20-60V AC/DC Optional)
• Accuracy Class: Class 1.0
• Digit Type: 3 Digit 3 Line LED
• Voltage Resolution: 1
• Frequency Resolution: 0.1
• Model Name/Number: OPTIMA
• Input Current: 1/5A
• CT Selection: Available
• Update Time: 1 Sec
• I Deal In: New Only
• Features: TRMS Measurements,3 Rows of 3 Digit Red LED Display,Single Phase , 3 Phase 3 Wire/4 Wire,CT & PT Ration Programmable.

The System is intended for acquisition of static strain data on large structures such as fuel tanks in launch vehicles and launch motor casings using a 24 bit Sigma Delta ADC and precision analog signals. This product provides Micro strain level accuracy with extreme low drift and high temperature stability for a precision strain gauge measurement system engineered for large channel count applications. Data Patterns has supplied thousands of strain gauge measurement channels for India's launch vehicle programs by using the cPCI architecture and providing compatibility with other data acquisition products. This system can easily can accommodate displacement measurement transducers, temperature DAC and so on. Facilities for multi rack synchronization, time stamping, operation control, grapping and reporting tools simplify the operation of the system. A comprehensive built-in test enables validation of all wired sensors. This feature is very critical when large number of sensors are simultaneously being acquired.

• Display Type: Analog
• Brand Name: SHS
• Automation Grade: Manual
• Maximum Pressure: 700 bar
• Medium: Water

• Application: Laboratory
• Display: 15 mm LCD Display
• Usage: Laboratory
• Voltage: 600V

• Type: LVDT Module
• Application: Industrial use
• Color: Silver
• Features: Unique design, Approved quality, Long service life
• Condition: New

Available with us are Rubber Hardness Tester that are high in performance and are easy to operate. Widely used across different industries, these rubber hardness tester are engineered to perfection adopting innovative technologies. We also endeavor to satisfy our clients spread worldwide by offering our range of rubber hardness tester as per the designs and specifications of our clients. Range:- 0 to 100 shore. Compact model and easy operate.

• Features: Enclosure leakage current and applied part leakage,Can test single phase/three phase test, Intelligent judgment, voice and light alarm, large font display, 8-group and 8-step test condition memory , DC-1MHz bandwidth, Earth Leakage Current.

dc watt hour meter, ac energy meters, ac panel meter

The HI98108 tester features a large multi level LCD which displays both pH and temperature readings simultaneously. The pH readings are displayed with a 0.01 pH resolution and with an accuracy of ±0.10 pH. The pH range of the HI98108 is from 0.00 to 14.00 pH. An exposed temperature sensor allows for rapid automatic temperature compensated pH measurements. Temperature can be set to display in ℃ or ℉. The LCD screen has stability and calibration tag indicators. The battery percent level is displayed at start up alerting the user to the remaining battery power that is available. The pH electrode uses a unique reference cell design that utilizes an extractable cloth junction. A clogged junction will typically exhibit erratic readings that will not stabilize. Simply extracting a small portion of cloth from the meter will clear any clog by exposing a fresh, clean surface. The ability to clear any clogging will extend the life of the pH electrode. Calibration is performed by pressing the dedicated calibration button. Once in calibration mode the pH electrode can be calibrated to 1 or 2 points using the pre-programmed standard buffers (pH 4.01, 7.01,10.01). When the standard value is recognized and stability is reached, the meter automatically accepts and stores the calibration value. Setup options include automatic shut off timing and temperature unit displayed. Automatic shut-off options are to turn the meter off after 8 minutes, 60 minutes, or disabled. To enter the setup mode the user presses a button located in the battery compartment.

Specification Upto 1400°C Auto Digital MOR and LOAD 5 different rate of loading

Data Acquisition & Control solutions based on LabVIEW and National Instruments Hardware – We specialize in providing data acquisition and control solutions, including the complete chain of components starting from sensor till visualization and data processing based on NI LabVIEW customized to your requirements.

• Weight: 100-200gm, 200-300gm, 300-400gm, 400-500g
• Color: Brown, Green, Grey, Maroon, Red, White
• Application: Energy Monitoring
• Display Type: Digital
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Body Material: Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless Steel
• Power Source: Battery, Electric
• Feature: Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet
• Warranty: 1Year, 2Years