Testing Machines Dealers in Ekkaduthangal, Chennai

• Features: Quality tested , Easy to use , Durable
• Type: Spring Testing Machine
• Application: Industrial
• Grade: Automatic
• Minimum Order Quantity: 1 Piece

Tensile strength is the stress at which a material breaks or permanently deforms. There are three definitions of tensile strength, yield strength, ultimate strength and breaking strength. Tensile tests are usually carded out on wire, strip or machined samples with either circular or rectangular cross section. Test pieces are screwed into or gripped in jaws and stretched by moving the grips apart at a constant rate while measuring the load and the grip separation. This data is plotted as load vs extension and then converted to engineering stress (load/original area) vs engineering strain (fractional change in length over the test section assuming the deformation is uniform). In special circumstances, the actual stress and strain may be calculated if the true cross section is measured during the test.   Features   Loading Accuracy as high as + 1% Straining at variable speeds to suit a wide range of materials. Continuous roll autographic recorder supplied as standard to enable study of the behavior of materials Motor driven threaded columns for quick effortless adjustment of lower cross-head-to facilitate rapid fixing of test specimen. High reading accuracy due to large size and design of dial. Wide range of standard and special accessories, including load stabilizer. Easy change from plain to threaded and screwed specimens. Large effective clearance between columns enables testing of standards specimens as well as structures. Simple controls for easy of operation. Robust staining frame of an extremely rigid construction. Safe operation ensured be means of safety devices. Fully enclosed and protected pendulum.  

• Material: Stainless Steel
• Automation Grade: Semi-Automatic
• Surface Treatment: Galvanized
• Working Temperature: -20 to 120 degree C
• Tensile Strength: 200 - 400 Mpa
• High pressure Leak Test: Upto 160 bar

• Brand Name: Indian Make
• Weight: 390 to 445
• Power: 440 Volts
• Model Number: EEE-LAA-001

Conforming to the tolerance and specification in accordance to i.s.-2386, pt-iv used for the determination of the resistance wear by small size coarse aggregate and crushed rock. The machine consists of a hollow drum mounted on a sturdy frame on ball bearing. A detachable shelf which extends throughout the inside length of the drum catches the abrasive charges and does not allow to fall on the cover.

SAMS Conforming to the specifications and tolerance in accordance to I.S.-516 for the determination of the compressive strength on cube moulds, manually operated with hardened platens and pressure gauge range 1000 KN capacity calibrated against N.P.L.Tested Proving ring or master gauge.

Hardness testers for checking hardness on soft gelatine capsules and paste: Model Digitest II Gelomat. Hardness testers for checking the hardness on Fruits: Model HPE II FF. Hardness testers for checking the hardness on Car Steering wheels: Model HPE II L. Hardness testers for checking hardness on car interiors.

Description Vibrating steel yard, no loose weight, clear graduations on Stainless Steel inclined index plate, main poise on steel rollers cannot travel beyond zero. Steel notch protects bar. Notches accurately cut by special machinery. Tumbler locking device Minor poise slides on a rigid brass index bar. The lever system enclosed in a strong cast iron frame is capable of withstanding loads for excess of rated capacity. The cast iron platform is mounted on ball bearing seated in beds on the stool to provide universal motion and avoid undue wear of the inter-changeable, hardened, steel knife edges & bearings which are easily replaceable when required.

• Voltage: 220 V
• Power: 250 W (Power Requirement)
• Weight: 150 kg
• Material: Stainless Steel
• Automation Grade: Automatic
• Frequency: 50 Hz
• Air Pressure: 4-6 mpa/M2

thermal relay testing machine, Centrifugal Machine, Control Panels

Testing asphalt pavement materials such as aggregate, reclaimed asphalt pavement (RAP) and mixture specimens often requires that samples be dried to a constant mass. Most labs accomplish this using convection ovens or fan drying, depending on sample type.

Material Testing Machines

universal hardness testing machine, hardness testing clamps

Universal Testing Machines, Hardness Testers, tensile testing machines

Testing Machine, 3D Printing Machine, Cnc Router Machine, Laser Machine

Gold Testing Machine

hydrostatic pipe testing machine, jo presses, pipe cladding machine

Creep Test

plastic testing machine, Abrasion Tester

Cube Testing Machine

Leak Testing Machine